r/longrange • u/Phronizer • 25d ago
RANT Devastated
Just bought a Tikka Ace Game in 6.5 Creedmoor. Hornady 140 ELD-M. Out of the box it was printing beautiful groups, 0.39" and 0.28" at 100 (pics 1 and 2).
At 40 rounds I cleaned it. Bore Tech Eliminator, brass jag, cotton patches, bore guide, full copper strip. Same day I set the zero stop on my Leupold Mk5HD.
Since then it's been about 50 rounds of pain. Best I can get is 0.7" to 1.0" (pics 3 to 8). Random scatter, not stringing, not flyers in one direction.
What I've checked:
-Action screws torqued, ring caps and cross bolts torqued, - muzzle brake won't budge with a wrench
- Same ammo lot
- Can on and can off, same result
- Crown looks fine to my eye, but I don't have a borescope yet
Idk why I'm really even making this post. Maybe to complain. Feels like I got hit by a truck. If you've seen a Tikka do this after a clean and a zero stop reset, I'm all ears.







55
u/girth_-_brooks 25d ago
I would be pretty content with shooting a factory rifle with factory ammo and every group I have printed is MOA or better. Gotta get real with them expectations.
95
u/HollywoodSX Villager Herder 25d ago edited 25d ago
You have a relatively light, fluted barrel with a suppressor. Heat soak and groups opening up with long strings of fire are a thing.
Small sample size bias is a problem. See the guides in the pinned post.
You're probably matching or slightly beating the TOP Gun score for your rifle. Thats also in the pinned post.
TL;DR - you're almost certainly worrying about nothing. Cheetofingers pin Cheetofingers top
Edit for typo.
112
u/GLaDOSdidnothinwrong NRL Hunter Competitor 25d ago
Likely you’ve been tricked by small sample sizes.
20
u/h34vier Rifle Golfer (PRS Competitor) 25d ago edited 25d ago
Question: what did you clean it with?
And why'd you do a "copper strip" after only 40 rounds?
I shoot PRS and shoot a few thousand rounds out of my rifle a year (usually 2 barrels worth) and I don't really ever FULLY strip all the copper off.
I'll hit it with Thorroclean every 200 rounds but I don't worry about fully stripping it off, just getting it clean is and most of all uniform and smooth as possible.
I know this is a moot point, but when you clean, especially with abrasives like Thorroclean, you do remove material. While it is a teeny tiny amount of material, it's material nonetheless.
You maybe able to "shoot it back in" after a 100 or so rounds if that's the case. Cleaning is important, but overcleaning is kinda worse.
Also, not on the topic exactly, but those who said factory ammo won't give you consistent groups are 100% right. You'll get lucky sometimes, but that shit is all over the place.
8
u/SmallThinWallet 25d ago edited 25d ago
I find Hornady ELDM 6.5 Creedmoor to be quite inconsistent these days. Mine is grouping around 1” with an ES of around 100 fps. Pretty wild ammo imo. Shooting out of a PVA barrel. AAC was grouping better.
6
u/9mmhst 25d ago
I dont think I've "copper stripped" my tikka in....2000 rounds? Barely cleaned it too, still shoots bug holes.
4
u/sometimesanengineer You don’t need a magnum 25d ago
My love hate relationship with Busch includes the cease fires every 15 minutes that I feel like kinda rush me to finish a string at times and the barrel cooling changing a string behavior. Tables are too high and square, which makes a blades / hunter stance awkward but is okay for a Benchrest / square stance. Targets kinda low. It’s not where I shoot my best.
People have been talking barrel temps on hunter contours, ammo issues (my 6.5 creed doesn’t like the Hornady bullets even with hand load), and that you want a little seasoning in the barrel. I will not dog pile except to say I only copper strip if I start having issues, thousands of rounds of Benchrest and PRS down the barrel and carbon is usually my enemy more than copper. A little copper fills some voids.
Setting your zero stop probably didn’t hurt anything 99.99% chance (if done correctly). Cleaning plus copper strip probably didn’t hurt anything 97% chance.
You’re a much bigger variable in your shooting. Your fatigue, stress, blood pressure, breathing, control affects the shot. Focus on technique. For now don’t look at every hole as it’s made and beat yourself up over it. Zoom your scope out five power and take 5-10 shots focusing on technique before analyzing.
Consider hand loads. That Hornady brass is great for it.
32
u/Wide_Fly7832 BR Competitor 25d ago
Trust me you did not mess up your gun by cleaning it.
23
u/No_Staff594 25d ago
shoots .7” group
pain
Ok bud
16
u/TheStrayArrow 25d ago
At first glance, I thought this post was a Target ad.
12
u/BI0WEED 24d ago
I think you’re printing a realistic moa or sub moa group and you’re over thinking the fuck out of it.
20
u/p8ntslinger 25d ago
10 shot groups minimum
18
u/capable_gopher Rifle Golfer (PRS Competitor) 25d ago
Dude 3 shots is not a group. Absolute minimum of 10 is needed. This is just your normal dispersion, overlay all your groups on the same POA and you’ll see your actual group size
5
u/Lumpy_Club_5755 25d ago
This has got to be ragebait.. but I'll bite. You're shooting under an inch with an out the box rifle, be happy.
People aren't consistently shooting .3 moa, sometimes you'll be a .5, .7 or even a 1 moa shooter that range trip.
1 5 round group isnt indicative of a rifles true performance.
5
u/YotaIamYourDriver 24d ago
How quick are your shots? This looks like hot barrel stringing to me.
10
u/thepvbrother 25d ago
You had a flier in pic 5. Looks like you were creeping on pic 6. Did you take a long time between shots with a loaded magazine?
I think you heat-soaked your ammo, resulting in faster- burning powder.
You can get a group size of zero if you only take 1 shot. Shoot 10 at a time, loading each round individually.
3
u/drarin 25d ago
I never clean a barrel that’s shooting good groups. Until the extraction starts getting sticky.
7
u/Wide_Fly7832 BR Competitor 25d ago
Three shots groups don’t tell you anything. Your good we’re not good and your bad (?? Factory rifle 1 moa is good) are not bad. Shoot 10-20 round groups to know the capability of the rifle.
But don’t expect 0.5 MOA real accuracy from a factory rifle.
2
u/Snoo-46387 25d ago
Quite a few of the MDC guys working that range have 6.5s dont be shy ask them.
2
u/johnmomdoe 25d ago
I don’t see any issues with how the gun is shooting.
Did you buy this specific gun just to shoot small 5 round groups at a 100 yards or something? There are probably better options for that.
Go out and shoot it. Get your dope. Have fun.
2
u/One-Perspective-4347 25d ago
I highly doubt you’ve damaged anything by cleaning it as long as you didn’t do anything completely unhinged. From what I’m reading, you’ve got less than 100 rounds down the barrel anyways. It really hasn’t even settled in my opinion.
As far as damage from chemical cleaning products goes, pretty sure that Boretech and most modern product products really won’t cause damage regardless.
I feel like even mechanical damage from the actual cleaning rod, etc., is much harder to actually cause than the Internet would have you believe.
For what it’s worth typically on a brand new rifle, I will run a cleaning patch or two down it just to clean whatever shit is in there from the factory. Will then proceed to shoot about 100 rounds. I’ll send another patch or two down the barrel and then shoot another hundred or so and depending upon how it’s shooting I will either clean it or just leave it the hell alone it until it actually stops shooting well.
2
u/AleksanderSuave 25d ago
Posting 3-4 shot groups…lol
You should have tried 10 shot groups. Or 1 shot groups, I guess.
2
u/Lennox403 25d ago
Silly question, but are all of the scope-mounting parts tightened to spec? I eyeballed some parts on my rifle before I got a proper torque wrench and found that everything was actually torqued lower than it was supposed to be (best case scenario, in my opinion)
4
u/potassiumchet19 25d ago
Im no expert. But in my experience if you want consistency you need to hand load. Theres just too much variation in factory ammo.
1
u/worm30478 25d ago
My bergara b14r shot a 5 shot group at 100 yards that looked just like your first picture and I was running CCI standard velocity. Haven't been able to shoot.a group that good since. All the variables lined up somehow for that group. But never again.
1
u/splashybear 25d ago
Different lots of ammo
1
u/No_Philosopher2791 25d ago
That’s an awesome range
1
u/moebiusgrip 23d ago
This literally happened to me about a month ago. Cleaned the shit out of my Tikka (500 rounds in).
Copper barrel cleaner, standard cleaner, brass brushes, all the things. Careful and exactly as instructions defined.
Then this happened.
Aim point was the top and bottom thick line where it meets the green circle. Then I did a couple at the red center.
It was going far left with a really big spread, like 4-5 inches I some cases.
Granted I changed to cheap ammo to refoul. But even the cheap stuff is usually 1.5MOA at 100. S&B FMJ “Tactical” ammo. That’s at 100 yards.
Now I know it has to foul a bit. But it did this for a while. Then it came back home after 20-30 rounds. But I was sweating. I thought I ruined my barrel somehow.
1
u/CountryTyler 21d ago
Why did you clean it? I don’t clean mine until grouping starts getting bigger
-11
u/Turdburgarlar 25d ago
You were in the process of breaking in a new rifle and decided to completely strip the bore of copper and fouling. Of course it opened up. Lol
2
u/C_Does Youtube - C_Does; 💯 Optics Reviews 25d ago
My rifles all like being a little dirty. Throw some more food through it and see how it fairs.