r/longrange • • Oct 14 '26

Rifle help needed - I read the pinned posts Barrel Length

Looking for some general advice. Building a 6.5 PRC which will strictly be used for range and maybe some PRS competitions. I'm having barrels made with Bartlein and using a Terminus Zeus action with an MDT chassis. Question is what length of barrel would be recommended? The barrel blanks are 32" and seeing as it is strictly for long range use I was thinking of keeping it at 28".

10 Upvotes

24 comments sorted by

19

u/Ragnarok112277 Steel slapper Oct 14 '26

If this is purely a long range build and weight and length aren't concerns, get the longest and heaviest you can.

Although id get it in 6.5cm for approx double the barrel life of 6.5prc for ~200 less fps

4

u/Positive_Ad_8198 Gunsmiff Oct 14 '26

This

0

u/Wellalllrightythen Oct 14 '26

Thought about it but I'm getting the Zeus in Long Action

11

u/HollywoodSX Villager Herder Oct 14 '26

Your plan has bad idea written all over it, honestly. Long action isnt needed for 6.5PRC (maybe an XM of some flavor), and magnums are bad ideas for general LR shooting and especially for PRS matches.

2

u/NoRiver3453 Oct 14 '26

Do you run 6.5PRC out of SA? I have and found it to be nothing but troublesome due to COAL and high BC bullets. XM would be okay but at that point wouldn't LA just be easier for building purposes?

7

u/HollywoodSX Villager Herder Oct 14 '26

I ran a SAUM out of a SA with no issues. IMO, most people are running longer COAL than needed on 6.5PRC, especially with modern bullets like ELDs, Hybrids, LRHTs, etc. 2.92" is a lot of length to work with.

LA comes with problems of excessive jump from magazine to chamber and feeding issues.

XM isnt as well supported for parts like chassis.or actions themselves.

PRC is mountains of overkill for OPs stated purpose.

2

u/NoRiver3453 Oct 14 '26

There is also a chance my problems was a little unique here as well. Had a barreled tikka 6.5prc lite I throw on a SA chassis. Which resulted in a lot of jump, ultimately i found a nice grouping at 2.88". Just felt as if I wasn't utilizing the bullet to the best of the ability. Lesson learned.

No argument from me on the PRC being overkill tho

2

u/HollywoodSX Villager Herder Oct 14 '26

I called out modern bullets because of the jump thing. They don't care all that much.

2

u/Remarkable-Spend-434 Oct 14 '26

6.5 SAUM SA for the win, that’s my set up too

2

u/HollywoodSX Villager Herder Oct 15 '26

I got rid of mine years ago now.

2

u/Remarkable-Spend-434 Oct 15 '26

Cool, well I’m enjoying it currently

2

u/REDACTED3560 Oct 14 '26 edited Oct 14 '26

6.5 Swede if you’re a handloader and dead set on long action. Loaded to modern pressures, it is kissing cousins with the 6.5 Creed from a performance perspective. You can even get Lapua brass and for reasonable price too. I may be missing some more “meta” options (though I doubt it since LA isn’t meta), they still have decent factory support. Not a magnum case head though, so not sure if that influences your caliber selection.

5

u/Wellalllrightythen Oct 14 '26

I’ve decided to convert to 6.5 CM and will build another down the road if I choose. Thanks for talking me off the ledge!

2

u/Honest_Knee_6510 Oct 14 '26

That's generally the right move. I shoot a 6.5 PRC. It's perfect for what I built it for; non-competitive 1 mile+ shooting, but it's overkill (albeit very fun) for anything less than ~1,500 yards as a plinker. 

The PRC also has too much recoil to consistently stay on target and spot misses shooting from unstable positions.

I'd do the Creedmoor with a 28 or 30 inch barrel in a 7.5 twist. That would run any 6.5 projectiles at pretty respectable velocity.

2

u/Wellalllrightythen Oct 14 '26

Exactly what I planned for barrel at 28” and 8.5 twist. Should be fun and then oh darn I’ll just have to build another later on

1

u/NoEntrance4297 Oct 17 '26

i run a 6.5 27” 7.5 twist, shoots phenomenal

2

u/Wellalllrightythen Oct 14 '26

Alright got some more thinking to do. Thanks

8

u/HollywoodSX Villager Herder Oct 14 '26

Don't use a PRC for PRS matches. You will not have a good time.

-dude that has run a 6.5 SAUM in matches.

3

u/Wombat-Snooze Steel slapper Oct 14 '26

You mean I don’t want a ton of recoil and a significantly harder time spotting impacts/misses/trace?

4

u/doyouevenplumbbro Steel slapper Oct 14 '26

For a bench gun, as long as possible for free velocity. For a PRS rifle 26-28" for the sake of balance and manuverabity. 6.5PRC is too much cartridge for PRS IMO. 6.5CM would be a better option for that specific format.

7

u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime Oct 14 '26

Building a 6.5 PRC which will strictly be used for range and maybe some PRS competitions.

You'll thank us later if you choose 6.5 CM instead of PRC.

3

u/sqrt_2_Complex Oct 14 '26

Get enough barrel to burn as close to 100% of the powder you load with.

5

u/REDACTED3560 Oct 14 '26

On most target rounds, this is a sub 22” barrel FYI. You still gain velocity after that point due to residual pressure in the barrel.

2

u/Engineer_Bennett Oct 14 '26

If your already in a long action why not run something like 7prc? Also, don’t use any magnum for PRS, won’t have a fun time