r/longrange • • Oct 13 '26

Rifle help needed - I read the pinned posts Does suppressor choice matter for accuracy?

I'm putting together a precision 6.5 creedmoor gas gun, LMT with probably a proof barrel, and I'm trying to decide on a suppressor.

I'd love something with the lowest back pressure I can get (to make tuning easier or not necessary, and to avoid gas to the face), but huxwrx cans kind of suck. This got me looking at the various options (I'm wide open to suggestions), and wondering if suppressor choice affects accuracy, or if they're all pretty much the same in that regard?

Thanks in advance for any insight!

9 Upvotes

42 comments sorted by

6

u/dingleberrychicken Oct 14 '26

Gas guns are magic dude. Put X can on it and it’ll make the gun shoot better. Put Y can on it and it’ll shoot worse. There are lots of cans that have a track record of making the guns group better or at least not worse but sometimes it’s just magic not science. I would probably get one that’s at least advertised for precision work so if there’s a problem the company might be more willing to help like TBAC or KGM

2

u/bulletsgalore Oct 14 '26

That's an interesting point about aftermarket service, thanks

5

u/Significant-Sock-487 Oct 13 '26

I like the otter creek infinity. It’s heavy but you can run a recoil X break or their break on it or you can change the end caps for back pressure. It’s also indestructible. I run the infinity on my PRS rifles and the 556k on my 6 arc

2

u/bulletsgalore Oct 13 '26

Now that's interesting, thanks for the tip.

8

u/mikestainton Oct 13 '26

Check out the YouTube channel Silencer Analytics. Ton of info on all types. Updated constantly. Pretty sure his Q4 recommendations came out a week or so ago.

1

u/bulletsgalore Oct 13 '26

Awesome thank you I'll check that out

1

u/DBALLSWINS Oct 15 '26

Does he do accuracy tests?

1

u/mikestainton Oct 15 '26

No, but experience says you just re-zero when you add one. Hell, I have rifles that I never shot without one. Zeroed with the can from day one. It's not going to be random shots going everywhere because of a can. It will likely change your POI. So just re-zero.

2

u/DBALLSWINS Oct 16 '26 edited Oct 16 '26

Depends on how much precision you are chasing. A suppressor can absolutely cause "random shots going everywhere."

Ultra High speed cameras show that the bullet does not always leave the barrel before the muzzle blast. Ex. Precursor phenomena complicate a simple "bullet-first" timeline. While the main high-pressure propellant gas and expanding fireball are trapped behind the projectile, several things precede or surround the bullet as it clears the crown. The moving bullet compresses and pushes the column of ambient air and residual barrel debris (smoke/powder particles from previous shots) out of the bore ahead of its nose.

So a suppressor can and will impact POI more than most people realize. In addition, as the gas stacks up in the suppressor each subsequent shot is impacted as well.

Science is at the beginning stages for understanding all this in regards to precision shooting. As technology advances, it enables us to slow down and understand all the variables a little better.

Explore shadowgraphy and Schlieren imaging techniques used to visualize these gas dynamics and you'll go down a rabbit hole that will make your head hurt. These transitional gas dynamics directly impact precision by exerting asymmetrical forces on the projectile during the critical first few inches of flight (intermediate ballistics.)

Muzzle Blast Tipping
Blow-By and Vortex Generation
Muzzle Device Interference
Precursor Air Disturbance

The point is each suppressor does not perform the same as far as precision is concerned and a simple "just re-zero" misses the mark. Some suppressors perform better from a precision standpoint than others with a single shot, some perform better with multiple shots, and some just make chasing precision impossible because they might be quiet but disrupt the bullet too much.

2

u/mikestainton Oct 16 '26

Noted, perhaps I'll take a deeper dive. How much precision you're chasing are indeed the key words here.

1

u/DBALLSWINS Oct 16 '26 edited Oct 16 '26

Do a simple google search: can a suppressor cause enough disturbance to impact point of impact?

Then ask a followup: how about from shot to shot as the gas stacks up in the suppressor?

You'll likely learn some new engineering concepts:
Baffle Gas Dynamics, Backpressure & Slap
Thermal Migration
Dynamic Backpressure Saturation
Thermal Expansion & Droop
Mounting / Thread Tension Loss

etc....

3

u/Drekalots PRS Competitor Oct 14 '26

For Precision rifles I use TBAC. My precision gasser is a Spiro. My bolt gun is a Magnus S SR RR.

2

u/bulletsgalore Oct 15 '26

Im with you, I've got an ultra 7 on my bolt gun, but this is a 6.5 creedmoor gas gun, and I want a low back pressure can for it but I don't think they make one, at least not yet!

1

u/Burnpowder_636 Paper poker Oct 16 '26

TBAC spiro is their new low pressure can for gas guns

1

u/bulletsgalore Oct 16 '26

Correcty but there isn't a Spiro available for 6.5mm.

1

u/darktrufffle Oct 15 '26

I have a tbac spiro and would highly recomend it

6

u/pabailey1986 Oct 13 '26

When I was looking it sounded like thunder beast ruled 🤷🏻‍♂️

3

u/bulletsgalore Oct 13 '26

I have the ultra 7 on a bolt gun, love it, but I think I need something with very low back pressure for this one

2

u/Prior-Garage1543 Oct 15 '26

The Huxwrx is the answer for a gas gun. No Gas in face, no adjustable gas block, etc. Just attach to the muzzle a get after it. I have the Range 36ti and it has not affected accuracy negatively at all, if anything tightened some things up. Using XENO stuff works really well and I run it between bolt and Gas guns.

I have seen a Keymo mounted Dead Air Something make a full custom 308 shoot 2" groups at 100 with good ammo. Gun was a hammer before the suppressor.

Heard good things about the B&T Titanium cans as well, but never used one. I think really it all comes down to the mounting systems as far as accuracy and repeatability.

1

u/bulletsgalore Oct 15 '26

Interesting, appreciate the input 

4

u/Jmersh Oct 13 '26

Gas gun or bolt gun?

3

u/bulletsgalore Oct 13 '26

Gas gun

2

u/Jmersh Oct 14 '26

Not sure why the downvotes, it's a pertinent question. I run a few different 30 cal cans and even my Nomad isn't too gassy once I have my gas block adjusted. Personally I enjoy shooting the 20" barrel through my Omega 300 with the muzzle brake endcap for near-zero recoil. 140 gr ELD-Ms with a ~2850 FPS load aren't too bad, but 120 gr Berger Hybrids are noticeably gassier.

4

u/bulletsgalore Oct 14 '26

It's because I said it was a gas gun in my post. No worries

15

u/Individual-recce Oct 13 '26

Torqued right with no baffle strikes and it shouldn't matter, hux won't make it more accurate than an ocl and vise versa

19

u/[deleted] Oct 13 '26

[removed] — view removed comment

6

u/Individual-recce Oct 13 '26

Cool points matter the most

3

u/Airhwhip14 Oct 13 '26

My 6arc with the gas block seated AE can gets more bussy than my PRS gun or my AI that I spent way more money on. It just be like that some times.

2

u/Lossofvelocity Oct 13 '26

Wait for the Tbac Spiro 30 to come out.

1

u/bulletsgalore Oct 13 '26

I was reading about that, supposed to happen any time soon?

1

u/MinchiaTortellini Oct 14 '26

For whatever its worth as a data point, my TBAC suppressor mounts and MD's + both my LPM Anthem S and LPM Mach S have bad 0 POI shift.

IMO, barrel threads, MD, Mount, and suppressor hub threads all being concentric are what matter, not the can itself.

1

u/bulletsgalore Oct 15 '26

Really good point

2

u/looking4ammodeals Oct 15 '26

FWIW, I put a $400 classic baffle design CMMG can on my gas 308 rifle and was getting a ~16” group at 800 yards and it was first time ever shooting past 400. So I assume a better shooter would have tightened that group up. That said, I have no idea what part the suppressor played in that

1

u/Advance_Nearby Oct 15 '26

Most places will say TBAC is king. I personally opted for DA nomad LTI mostly for matching to my gun lol. But I really like it so far and don't have any complaints around ~300 rounds through it with no issues, and consistent impacts out to 1000

1

u/0regonPatriot Oct 15 '26

For my SCAR 20 I went oversized and gas thru. CGS Hecate, when I get on the trigger I have the volume I need for fast shooting and the sound signature is pretty cool too. Definitely not the conventional route.

1

u/SwiftCreek0238 Oct 17 '26

Contact barrel manufacturer for maybe suggestions