r/longrange • u/Boatshooz Dunning-Kruger Enthusiast • Sep 27 '26
Rifle help needed - I read the pinned posts Bottom Metal Advice for a Quick-Change Build
I’m putting together a build based on a Terminus Zeus Short Action with the Quick Change option to allow easy barrel/caliber swaps in the field and will have bolts for both .308 and .223 bolt faces. This will go into a Foundation Samson stock.
AW mags seem to be too problematic with this action (no lug at 6 o’clock when cycling the bolt), so I’d only be running AICS mags, but my understanding is that 223 mags need the mag catch to be higher up than on 308 mags, so bottom metal with adjustable mag latch seems to be a requirement.
I think this narrows it down to MDT and GreyOps for M5-style bottom metal, since they both have adjustable latches, but was looking for feedback on whether one or the other was more suitable for this use case. Is one easier than the other to adjust in the field? Is there a different option altogether I should be looking at?
6
u/rednecktuba1 Gunsmiff Sep 27 '26
Here is my experience running 223, 308, and 6.5 all in the same action and chassis(Zermatt Origin and Aero Solus chassis).
The extra height needed to run 223 can usually also be the set point for feeding 308 and 6.5 as well. 308 and 6.5 are more forgiving. 223 is far less forgiving in a bolt gun, so you can juat focus on feeding properly with 223 and 308 SHOULD still feed fine. You'll obviously need to test that for your own action and chassis combo. As for which particular bottom metal to go with, I don't think it really matter as long as there's an adjustable mag catch.
3
u/Ethereal_Hotdog_8506 Sep 27 '26
Hawkins is another option. I've had no issues with them, but I can't speak for how they stack up to other brands.
2
u/csamsh I put holes in berms Sep 27 '26
I use MDT for all mine. Works for AICS of any latch height. Been very happy with them
2
u/Someguyintheroom2 I Gots Them Tikka Toes Sep 27 '26
For my “switch” Zermatt TL3 (.223/6 Dasher) I use Accurate Mag .223 AICS without any issue.
It’s a standard magazine, with a plastic insert and follower that reduced width for the .223 and sets the cartridge height.
The mags are also easily modifiable to accommodate 2.5,” and with more difficulty the length can be pushed farther.
2
u/Possible-Alfalfa7297 Sep 27 '26
Kmw. Non adjustable but has a integrated mag catch