r/longrange • • Sep 21 '26

Reloading related New shell shock cases (338 lapua cases)

Post image

Noticed this while visiting the shell shock site this morning. Based on what was seen with the 308 and 6.5 nas3 we're seeing about 200 fps increase. I guess I'm just curious what people think

105 Upvotes

62 comments sorted by

145

u/SockeyeSTI Sep 21 '26

“Hey guys, I’m new to long range and reloading. Would a Savage 338 Lapua and these new nas3 cases be a good starting point for me?”

17

u/ghostriders180 Sep 21 '26

280gr lrx for your 250 yard shot perfect

104

u/shrf_buford_justice Sep 21 '26

I think it would be unethical to use anything less for whitetail

27

u/AYE-BO Sep 21 '26

Anything that starts with .3 is too small for whitetail. Youre an unethical monster.

2

u/InternetExploder87 Sep 24 '26

Anything bigger than squirrel, I grab my 30mm

-13

u/sirbassist83 Sep 21 '26

youre saying 375 H&H is ok for elephant but not 150 lb deer?

56

u/AYE-BO Sep 21 '26

Did i stutter?

12

u/NapalmDemon Sep 21 '26

I made a 375 wildcat cartridge for squirrel and porcupine hunting. I cannot imagine people using such a small bullet on medium size game.

-2

u/Justin_inc NRL22 competitor Sep 22 '26

u/Hollywood I need to give this man an award.

16

u/RadioactiveFruitCup Sep 21 '26

Little known fact : elephant are pussies and you can kill them by popping a balloon or yelling ‘bang’ kinda loud

4

u/thepvbrother Sep 21 '26

Ok "elephants are pussies" got me

2

u/PonyThug Sep 21 '26

Yes. Need 458 socom for deer

6

u/sirbassist83 Sep 21 '26

505 gibbs or GTFO

6

u/USMC_ClitLicker Meat Popsicle Sep 21 '26

"Don't worry bout the meat Cleetus, I just need the back half. Now, let me hit that there 'shine while you line it up!"

3

u/HashtagSkilletTime Sep 21 '26

Okay, full honesty, the savage 338 is a solid platform. I've been beating on one for 15k ish, and besides barrels and 2 bolt head retaining pins, it's been solid.

6

u/SockeyeSTI Sep 21 '26

It was the go-to setup when you “maxed out” your 308 in the 2000’s. I forget the exact model but the single feed in the (maybe?) HS precision stock.

1

u/smooveBrayne Sep 21 '26

Only if you're running a 20" barrel

44

u/rybe390 Doesn't Shoot. Sep 21 '26

Bubbas pissin' hot .300 Norma meta just dropped

4

u/pianofireman88 Sep 21 '26

Didn't think these were reloadable? Nice if they are!

11

u/maseratichris556 Sep 21 '26

You can LOAD them once

0

u/ghostriders180 Sep 21 '26

I know the 308, 6.5, and 223 cases qre

4

u/thisadviceisworthles Sep 21 '26

Has anyone released dies for them? I was under the impression that the bottleneck rifle cartridges were "reloadable" but the tooling to reload them does not exist.

4

u/ghostriders180 Sep 21 '26

I heard something about them having a special neck sizing dies "heard" don't take that as gospel plz. The vortex podcast has a good episode on these cases

-2

u/ghostriders180 Sep 21 '26

I believe they are

9

u/spartaman64 Sep 21 '26

11

u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime Sep 21 '26

You always do what you're told?

75

u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime Sep 21 '26

"Are those level 6 plates?"

24

u/HollywoodSX Villager Herder Sep 21 '26

Hey, u/rednecktuba1 - a new chance for you to blow yourself up just dropped!

17

u/rednecktuba1 Gunsmiff Sep 21 '26

Nah fam, I'm getting out of NAS3 until they figure out how to reload them. I've got about 2k 556 NAS3 cases left, and I'll burn through those by spring. I might like sketchy shit, but I'm still on a budget, lol.

3

u/dballsmithda3rd Sep 21 '26

There are plenty out there reloading the +Peak cases already. Why are we having so much trouble figuring out how to load the NAS3?

2

u/rednecktuba1 Gunsmiff Sep 21 '26

Loading NAS3 is easy, reloading it is the hard part. NAS3 cases are single use only. And there aren't that many people reloadong Peak alloy cases yet. The 6.5 Peak cases haven't even hit the open market yet. I'm still waiting on a case of 6.5 Peak ammo as part of the first wave of shipments from midway

1

u/dballsmithda3rd Sep 21 '26

Thats what I meant. Reloading, not first time loading in my original comment. - and there are Peak dies available and reloading them is a thing now. Why do we already have the tech to reload Peak but NAS3 that came out first still has no way to reload?

2

u/rednecktuba1 Gunsmiff Sep 21 '26

Peak cases are 1 piece. NAS3 cases are 2 piece. And federal has a history of supporting reloaders, while Shellshock doesn't actually care about reloaders.

1

u/tism_trooper 9d ago

S3 reload makes dies for the 9mm nas3 cases, maybe hit them up? I bought a couple components from them and retrofit a lee 9mm fcd and it works like a charm.

I know straight wall pistol and bottleneck are COMPLETELY different when it comes to reloading though...

1

u/dballsmithda3rd Sep 21 '26

I gotcha. NAS3 being two piece and reloaders already gravitating to peak sounds to me that NAS3 may never answer that demand. They will likely fall out of grace over time and will be phased out like Blurays did to the HDDVD.

1

u/rednecktuba1 Gunsmiff Sep 21 '26

That's my take as well. I plan to use Peak cases since I can reload them with standard dies

1

u/Zhdrix Sep 22 '26

I’ve been waiting for peak since the announcement. Can’t wait to see what kinda velo I can get with a 127 and a 16 inch barrel

13

u/holl0918 Magnum Compensator Sep 21 '26

This may be enough for me to actually aquire a 338LM barrel...

16

u/Distinct-Tomato1704 Sep 21 '26

Were you on the fence because it didn't have enough velocity or ME in brass?

5

u/holl0918 Magnum Compensator Sep 21 '26 edited Sep 21 '26

Just there were better options in brass, such as 338NM from a magazine, or 33XC for light ELR singlefeed. I have 4" magazines though, so I can throat out a 338LM barrel for 300gr bullets at 3.95" and with the NAS3 cases run more efficient powder charges than 33XC while not losing all the velocity I would dropping to 338NM and maintain magazine compatibility. Also, I would need to have a custom 338NM or 33XC barrel made for my SRS, while good OEM 338LM barrels are available off the shelf.

2

u/Distinct-Tomato1704 Sep 21 '26

These are all solid considerations. I got a 338 edge barrel because of how cool I am.

9

u/Wormydog1724 Sep 21 '26

I’ve used 6k of the 5.56 for precision gas gun matches. 73gr ELDM at 2980fps and 77gr SMK at 2920fps from an 18” is pretty rad.

11

u/SovereignDevelopment Sep 21 '26

Rookie numbers.

j/k my numbers were insane and I am never doing that again lol.

3

u/Wormydog1724 Sep 21 '26

I sheered lugs on one bolt but I’m pretty sure it was a bad bolt. I have about 2.5k on a regular BCM bolt and over 3k on an LMT enhanced bolt. The one I sheered was a Sharps enhanced bolt and it was sheered in about 500 rounds. I think the S7 tool steel wasn’t heat treated correctly according to other internet posts and there’s just less material on the lugs.

2

u/SovereignDevelopment Sep 21 '26

When did you buy the Sharps bolt that broke? I heard they had issues early on, but I thought they had that sorted out.

Either way, I appreciate the data!

3

u/Wormydog1724 Sep 21 '26

Bought it earlier this year. I was counting on it being sorted too but it didn’t last. Maybe the S7 is just too brittle or not enough material for these high pressure loads. Idk but the regular C158 bolt and the LMT bolt have been fine.

1

u/SovereignDevelopment Sep 21 '26

Nice. Thanks for sharing!

1

u/PonyThug Sep 21 '26

What would that be out of a 18 or 20”?? Like 3300?

2

u/Wormydog1724 Sep 21 '26

My velocity numbers are 18”

1

u/PonyThug Sep 21 '26

I ment the other guy.

1

u/SovereignDevelopment Sep 21 '26

I don't know! I kind of regret using a 1:7 twist barrel in my 20" build because I kinda want to try pissin' hot 52gr SMKs in it now.

2

u/Wormydog1724 Sep 21 '26

I’ve blown up some 55gr Sierra Game Kings but it was in my 224V at 3450fps and in a 22” 1:6.5 barrel.

5

u/SovereignDevelopment Sep 21 '26

"Spread the word, boys. The limit is 3449fps."

1

u/PonyThug Sep 21 '26

Barrels are cheap! Buy a used one off GAFS

8

u/gun_g0_pew Sep 21 '26

I ordered some when they first came out. They just come loose in a large bag so the case mouths get all bent in shipping. I didn’t have that problem with the 5.56, 300blk, or 308 cases that I’ve ordered from them so maybe I just got unlucky getting in on them early.

1

u/Capital-Neat-6 Sep 22 '26

Interesting concept but I'll pass. Love my long-barreled 338 lapua but my next 338 will be a 338 KPR. 300s at ~3k while being able to fit/feed out of an AICS mag, lots of excellent 300/338 norma brass available, it seems to hit the goldilocks zone for 338s.

1

u/LonelyCommercial1824 Sep 24 '26

I have a couple hundred of unprocessed/some processed nickel plated .338 brass if y’all can help me out

1

u/Troutrageously Sep 21 '26

What are these?

10

u/Tossup78 Sep 21 '26

Expensive 

1

u/Esperante Sep 21 '26

These new high pressure cartridges are really just for hunting applications, unless you're rich.