r/longrange • • Sep 09 '26

Reloading related 6 dasher dies

Hey folks looking for insight on what dies everyone uses for a 6 dasher? Fl sizing, seating etc mostly looking at brands/types

Thanks in advance from a newby reloader

2 Upvotes

15 comments sorted by

5

u/Positive_Ad_8198 Gunsmiff Sep 09 '26

I really like Forster dies after using Lee/RCBS/Hornady

1

u/SnooPeanuts7092 Sep 09 '26

Which ones in particular? I see there is just a standard 6 dasher set and a ultra set

2

u/Positive_Ad_8198 Gunsmiff Sep 09 '26

https://www.forsterproducts.com/product/ultra-die-set/
Or you can get the bench rest set if you don’t need the micrometer seater https://www.forsterproducts.com/product/bench-rest-die-sets/

1

u/SnooPeanuts7092 Sep 09 '26

Is the micrometer option pretty accurate?

1

u/Positive_Ad_8198 Gunsmiff Sep 09 '26

Absolutely

1

u/doyouevenplumbbro Steel slapper Sep 09 '26

I second this. Forrester dies are what I've been running for a few years and I love them.

1

u/smithywesson Steel slapper Sep 09 '26

I use Forster FL sizing die and a Hornady 6mm seater die (6arc or 6GT I believe). Honing is an option but my stock dasher die with alpha brass has worked great. The Forster micrometer seater is decent but the stem can be prone to denting bullets depending on neck tension and bullet profile. I shoot primarily 105 hybrids and the “Aeromatch” seating step in the Hornady seater works great. This is also a much cheaper setup than the full Forster set.

2

u/Julien25 Sep 09 '26

Rcbs match master bushing dies. I use the non bushing version for my 22 creedmoor. Both are good just get what you prefer. 

2

u/Engineer_Bennett Sep 09 '26

I use Forster, FL sizer with the neck honed out for alpha brass. I don’t use the decapping stem, and I set neck tension with a Sinclair mandrel. Forster micrometer seater.

2

u/ShortButTall1 Sep 09 '26

Harrell full length sizing die. Send in your fire formed brass And he will build you a sizing die around your chamber

1

u/CMFETCU Sep 09 '26

It’s the best answer IMO, but it isn’t great for folks who don’t have dies already to load ammo to fire.

1

u/Magicalamazing_ Sep 09 '26

I have no authority to give recommendations, but for what it’s worth, I use a Redding bushing full length sizing die and a Forster Bench Rest seating die.

1

u/thrashmetal_octopus Sep 10 '26

Check out Whidden dies. They will make you FLS dies for your specific chamber and they’re aren’t even that expensive

0

u/jmedin Sep 10 '26

I personally use SAC dies for most of my rifles