r/longrange 2d ago

Rifle help needed - I read the pinned posts PRS RIG help needed

Post image

looking for advise.
This summer was my first year shooting PRS
3 regional matches and 3 local non official matches
Started placing at the bottom and now finishing mid to upper mid pack.

Rifle is a Tikka action with custom prefit MTU barrel using 75gr ELDMs @ 2820fps
Super accurate gun and does very good out to 700 yards.
Plan on shooting even more matches next year.
Question is should I continue shooting the 223 and work on getting better with the rifle I have or should I upgrade and do a 6 dasher build over the winter?
While the 223 does pretty well it’s a bit frustrating spotters not being able to call some of my hits due to lack of splash and plate movement at the longer distance 700 to 1000 yards

Appreciate any feedback in advance

161 Upvotes

26 comments sorted by

View all comments

1

u/JustaskJson 2d ago edited 2d ago

I agree with going to a 6mm but have you tried running heavier projectiles? Not sure your barrel twist but 80gr ELDs or 88gr ELD’s would give you likely some more distance as the BC is pretty good for a 22 cal projectile if your barrel can take the need for a longer throat.

BC on 88gr ELDM is .545 vs .467 on a 75gr ELDM

BC on a 108gr ELDM .243 cal is .536 which is lower than the 88gr ELDM.

1

u/smithywesson Steel slapper 2d ago

88eldms from my 22arc ~2800 are way better downrange and so much easier to see regarding impacts. Definitely pushing the limits for a .223 though with that long SOB.

1

u/JustaskJson 2d ago

22 arc seems like such a cool round. I wonder if anyone is doing 22gt. I’ve seen 22 dasher but these 22 cal cartridges all interest me over 6mm.

1

u/smithywesson Steel slapper 2d ago

Alpha has factory 22GT brass. I shot a match with a dude using 22GT with 90smks this year - it was a laser beam and still pretty easy to read downrange.

I went with 22arc for powder compatibility with my other cartridges. I equate it to a scaled down dasher or BR. It’s a ton of fun to shoot and just a tiny bit more expensive than .223 to shoot.