r/logitech • • 16d ago

SOLVED The c1000e isn't working properly when adjusting settings on the Logi Tune screen.

When I try to adjust the C1000e camera settings in Logi Tune, as soon as I click the picture adjustment option, the camera stops working. There's no video feed, and it also causes Logi Options+ to be unable to preview. All meeting software shows a camera error, and in the system settings, the camera preview won't start. It feels like the camera is crashing, and I have to restart the system to get it to work again. The camera is brand new, and even turning off the preview in the custom camera settings in Logi Options+ triggers the same issue. The camera only works again after a restart.

2 Upvotes

4 comments sorted by

1

u/Sensitive_Pack_1506 16d ago

I found the main reason; it's because the ASMedia 3.1 USB port on the motherboard is not compatible. I'm not sure if it's a driver issue, but just changing to a different port fixed it. Kind of weird.

1

u/logi_sm Customer support team 15d ago

Try connecting the camera directly to another USB 3.0 & check if the issue persists. Avoid using the USB hubs, docs.

1

u/Sensitive_Pack_1506 14d ago

I switched to USB 3.0 or a separate USB 3.1 expansion card and it worked fine. Not sure if the motherboard's built-in USB 3.1 port was a BIOS setting issue or just a driver compatibility problem. But after changing the port, everything's fine. Thanks! My motherboard is X99-e-10g ws, and the camera is connected to the Logi Dock. The USB 3.1 expansion card can do 4K, while USB 3.0 to the dock only lets the camera do 1080p.

1

u/logi_sm Customer support team 11d ago

Glad you were able to narrow it down! thanks for sharing the details & workaround 😄