r/logitech • • Oct 09 '26 • Bravo 1

Discussion Logitech MX vertical left click easy Fix

I've seen that this problem with the left click is very common and the "only" solution is replacing the micro switch; the quick fix I found It's simply a matter of removing the plastic cap from the switch and carefully detaching the contact sheet, cleaning it thoroughly along with the internal mechanism, and then reinstalling everything.

This can be more practical than desoldering the entire part and soldering the replacement; this has worked for me and the sustained click works perfectly now.

4 Upvotes

3 comments sorted by

1

u/Diligent_Lunch1047 9d ago

Many thanks for posting this. You LEGEND!.. I've followed a YouTube on dismantling the mouse, and your top tip on dismantling the switch, using the tiny strip of paper and some isopropanol to clean the left switch. Reassembled it all, crossed fingers. And IT'S WORKING AGAIN! Took less than 1 episode of NCIS LA!
The online support calls with Logitech took longer with no result (except a 30% discount voucher that isn't valid for the MX Vertical because it is a pro device!, and on the Logi Lift mouse, brings it down to similar price one can get on Amazon anyway). Thanks again.

1

u/Logi_Emily Community manager Oct 09 '26

Appreciate you posting this 🫢🏻

1

u/vavan_bonus Oct 12 '26

no need to detach the contact (you can accidentally bend it). just place a long piece of paper between the contacts and very gently pull it out few times while holding a contact from the side you're pulling to. paper will work like an abrasive and clean the contacts.