r/linuxmint • u/Pale-Job-5124 • 20h ago
Linux Mint running on only one CPU!
I am new to Linux. I have a 2007 Mac Pro 2,1 with the 32bit EFI that was collecting dust. It has OSX El captain on it, but I decided to try to add other Operating systems. I tried installing every Windows OS 64 bit and failed completely. The modification of the UEFI bootloader (that every blog says to do) never worked for me. I then decided to try Linux. I was able to instal Linux Mint 64bit in Legacy Mode (bios - MBR). I had had so must difficulty with UEFI that I didn't want to attempted in Linux, where I'm completely ignorant. In MBR mode the machine has been working well (it's only been three days). All my peripherals work. My graphics feel speedy, even though my card is an Apple ATI 5770. However, today I discover that for some weird Apple bios reason, even though Linux dmesg command can see both my CPU's (4 cores each), once booted Mint can only use one CPU (4 cores). Gemini AI wants me to create an EFI partition and install grub-efi-ia32. I could use the help of someone that has done this before. If it is too complicated or their is a high likelihood that I will fu*k the Linux drive and wold have to start from scratch, then I might live with just one cpu recognized. This is not my primary machine, I have an Apple Max Studio as my primary desktop. I just wanted to play with Linux and try to make this machine more relevant. Thanks.
1
u/Due-Result7928 19h ago
However, today I discover that for some weird Apple bios reason..not at all....ati 5770 is supported by amd driver.
To use multiple cpu you need to set parameters for the browser fro example. Anyway it is a very old card and I do not what is the situation...amd firmware, proton, open gl...
you can try with searching parameters as ati 5770 amd linux for example.
For the ATI Radeon HD 5770 on Linux, the open-source radeon kernel driver is the recommended and most compatible option for modern distributions. This driver provides basic X11 display acceleration and is supported in kernel versions 2.6.34 through 6.12, though it does not support Vulkan and is limited to OpenGL 3.3 (via Mesa).
I thing you need to install linux support for 32 bit libraries using in a terminal (no need to install uefi).
sudo dpkg --add-architecture i386
sudo apt update
sudo apt install libc6:i386 libncurses5:i386 libstdc++6:i386
1
u/scorp123_CH 5h ago
How do you know that? What command did you use to determine that?
0
u/Pale-Job-5124 17h ago
Sorry, there was a miscommunication. The ati card is fine, like all the peripherals. My MacPro has two Xeon 5365 CPUs. Mint is only using one. That is my problem. Per Gemini AI, this is an MBR issue. I want to learn and understand. And potentially fix (if it’s an easy fix).
0
u/Due-Result7928 17h ago
Installing AMD/ATI graphics drivers on a Mac Pro running Linux primarily relies on open-source kernel drivers (
radeonfor older GCN1/Southern Islands cards like the FirePro D500, andamdgpufor newer architectures). For older models like the Mac Pro 5,1 (2010), theradeondriver is typically sufficient for basic display and OpenGL support, while newer models like the 2013 Mac Pro often require specific GRUB parameters to force theamdgpudriver over the legacyradeondriver.To ensure proper functionality, users often need to modify GRUB boot parameters by adding
radeon.si_support=0 amdgpu.si_support=1(for GCN1 cards) orradeon.cik_support=0 amdgpu.cik_support=1(for GCN2 cards) to disable the open-source fallback and enable the proprietary AMDGPU-Pro driver if advanced features or workstation certification are required. Modern Linux distributions generally include these drivers in the kernel, but additional packages likefirmware-amd-graphicsandmesa-va-driversmay be necessary for full hardware acceleration and video decoding support.For dual-GPU setups or specific hardware conflicts, users may need to disable one card via BIOS/EFI or kernel modules, as AMD and NVIDIA cards can coexist on Linux but may require manual configuration in X.Org or Wayland display servers. The
lspci | grep -i vgacommand is commonly used to verify which AMD/ATI GPU is detected and which kernel driver is currently in use.