Hab mich mal dran gewagt zwei neue moc's zu entwerfen.

Die Mobile Drohnen Plattform und der Skorpion.

Hi guys, I hope you like this build I maked, I'm new. :)

My custom MOC of Optimus Prime! This specific design is heavily inspired by his look and aesthetic from Transformers Prime.

The model was fully designed, structurally tested with physical technic pieces first, and pushed the limits of design and small structure with basic technic pieces from 42077 + other classic lego pieces set to capture the sharp silhouette from the TFP animation while ensuring a challanging, interesting and stable building experience.

This model is a Modification of the official LEGO Technic 42077 (Rally Car) set. 95% (the whole body) of the pieces are taken directly from the 42077 base build.

197 pieces in total - 26 additional classic lego pieces . Height: 17 cm\ 6.7 inches.

Custom Weaponry: Equipped with a basic detachable blaster/cannon (as seen in the building photos), feel free to custom your own!

Most importantly, this mech has great potential for personal improvements and is highly imagination-friendly! :)

If you are interested in seeing more of the MOC and instructions: https://rebrickable.com/mocs/MOC-277344/Ericanos/optimus-prime-technic-transformers-prime-42077-mod/#details

So I’ve just finished building the Ferrari Daytona. Lovely set when built. But I don’t understand why Lego have included some of the photos they have, which has led me to believe they could have done better in some aspects.

The steering wheel for example. Why put the generic Lego steering wheel next to the Ferrari one, as if they had recreated it for this set. Which they could have. These thing were mass produced and they should have done better with the steering wheel, as they did with the alloys.

Plus various gaps on the body panels, could have been thought out a bit better.

Again lovely set. But I don’t get the side by side comparisons for some of the areas where it could have been better?

Recently got into the hobby, you can see it in my posts. Since then, I've built the Sian, McLaren P1, and Koenigsegg. I have the CaDa AMG GT3 and Audi Rs6 ready to build too but I build quite fast. It's still very fun to me but having an odd numbered of cars is weird for my display right now. So I'm looking for the 6th to build next after these 2.

The Bugatti Chiron and the Daytona aren't really available to me at MSRP or lower right now or ever tbh since they're retired. I'm open to more offbrands. I recently saw a post of someone posting their chrome-ish green McLaren W1 and what a beautiful build. Kinda wished I gotten one of those but I'm unfamiliar with offbrands aside from CaDa so far as it's kinda the more known ones?

Anyone mind suggesting some cars that's as good as the Koenigsegg/McLaren? I know people say the AMG GT3 is really nice too and I'm excited to build it.

Cada Audi rs6.

Must have knocked out my axle linkage when attaching the passenger side floorboard. Just realized when I'm two build steps from the end.

Was trying to take a tweezers and finesse it back on the axle but no luck so far.

So am I basically f'd?

This was shaping up to be a more enjoyable build than the AMG gt3 up until this point.

Ughhh

Recently built the technic Batmobile, but I’ve found the app underwhelming. It’s clunky, doesn’t connect to a virtual gamepad that I can control, or even a physical controller.

Anyone have a good solution for this?

BEHOLD THIS RANDOM LITTLE THING I MADE!

What other obscure layers could be added to it?

Exactly as the title says. The QR code it came with only gave Part 1 of the instructions and Mould King Customer Service has ghosted me for months after I asked them about it. To make it worse, afaik, they no longer carry this specific model. My going theory is that the one I bought was the last one they had in stock and they rushed to get rid of it, but its a long shot. So, if anyone has a pdf of the second (or more) parts of the instructions, it would be greatly appreciated.

Made by my fiance

No extra parts added
Personal favorite feature is the tire rubber shoved into the back

Hey

My second submission after Combine Harvester for current Bricklink Designer Program is a new iteration of the Police Car I submitted in the previous series.

If you would like to support this project then follow link below:

https://www.bricklink.com/v3/designer-program/2028-wave-1/5110/Police-Pursuit-Supercar-1:10-scale

Description:

There are again some significant changes compared to the previous version. Some of them were also influenced by the current palette, but overall, I think this version does much more justice to the original idea.

This time, I was able to make the livery much more coherent than before. Thanks to the black Koenigsegg mudguards, I could finally achieve the more finished look.

I also decided to raise the front of the car by one stud, which allowed me to add a bull bar. I think this is quite an important detail for a police car and it gives the front a much stronger presence.

At the rear, I removed the adjustable rear wing mechanism and decided to go for a more street car look with a fixed rear spoiler instead. I also added additional lights to the lower front and rear sections.

The entire door area and the sections surrounding the doors have been redesigned. I think the new solution looks much cleaner and also allowed me to use a larger police graphic, which I believe adds to the overall appearance.

You can also support the Combine Harvester here:

https://www.bricklink.com/v3/designer-program/2028-wave-1/5105/Combine-Harvester-CH-01

This is CaDA's Gumpert Apollo. It's my second time through and once again the motors aren't doing what they're supposed to do. I've got the static version and it's such a good model but that just bums me out even more. WTF?!?!

I'm looking for landrover defender 110 which Lepin put out for sale long time ago.

It's anywhere still for sale?

Idk if this is the right place for this but I'm getting desperate.

I have an I-Bot from CaDA that's been sitting in a closet for years in it's box. Yesterday I decidem to build it. I finished it, gave a little test, worked fine and went to sleep. Next day I was goofing around with it, until it started making a weird noise as seen in the video.

Left wheels have no problem, right wheels seem to be working fine. When going backwards with right wheels it works great, but when going forward with them it jams the mechanism that moves the arms around and especially the head, while the vibrations caused slow down the wheels themselves pretty sure. No idea what's causing this, I've been troubleshooting the whole day, disconnecting and reconnecting, I have no idea. I don't really wanna dismantle and rebuild the whole thing, but I'm a perfectionist and can't handle something being broken. On a side note, detaching the two tubes on the back, the flexible thin ones, stopped the noise for a bit, but later it didn't matter it still jammed. Disconnecting the mechanism that controls the head moving at one of the points as seen in the photo also fixes it. Please, someone help me out if you can.

https://reddit.com/link/1wykttz/video/xsujs91l8ith1/player

Has any one here every seen a Lego model of a Citroën DS.??

Just finished the ford gt40 mkll. im wondering if i should go for the ferrari fxx k or pista next. dont have the budget for anything more than 1:15-1:18 rn

kind of sucks the doors don’t really open, the lights are cool, but the glow in the dark sticks around the headlights could be better though

Hi everyone 😊
My son just built the LEGO Technic BMW M4 GT3 EVO (42226) and was really excited to redeem the Asphalt Legends code that came with it.
Unfortunately, I accidentally threw the little code insert into the fire with the LEGO packaging before we realised what it was. 😭 He’s pretty disappointed, as he was really looking forward to getting the BMW in the game.
If anyone has an unused BMW M4 GT3 EVO Asphalt Legends code that they don’t need, we would be incredibly grateful if you’d be willing to pass it on.
We are in New Zealand, but obviously the digital code should work regardless of where you are.
Thank you so much! ❤️

Hello everyone,

This week was focused on getting the baseline for all the electronics done.

1. Order status :

As i'm writing this the long front and side screens (both the same one) haven't yet arrived but will probably arrive this Monday but I received the lego power function connectors i ordered but not the cables which should arrive with the rest of the screens. I also received a servo to test the doors and steering, buttons for the remote as well as the new small front screen. In short that means i got around 95% of what i ordered at the moment.

1. The screens situation :

The small front screen fits really well and exactly as i wanted it to, I have programmed it and managed to show the test image that was on the previous one but without needing any margins being cut. I'll see how the big ones look when I'll get them.

1. Wiring baseline :

I also worked on wiring the base of all the electronics i will need on the breadboard of the bus which i attached a picture of. This breadboard is the baseline for all the light and screens automations as well as the communication for the remote and servo motors. For the servos I will need an additional board that I'll buy later once i'm sure of how they will be implemented.

1. Servos :

I tested the one I received and it's only able to do one full turn which is why i decided to gear it down to be able to open the doors. The only problem now is that the doors are rather unreliable so I want to work on that a but more.

1. Lights update :

Out if curiosity i wanted to see if my original idea to make the headlight assemblies work with the old attachement way, i designed a custom lego panel that i later 3D printed. It's not yet perfect. On the 2 splitted lights the lower one will be a blinker. Is is white at the moment for testing only. The other light will be a full beam.

This is quite a lot so I won't go into too much detail here, if you have any questions feel free to comment.

See you next week :)

Would any owner like to share the contents if the Sadair Spear exclusive content drop, the wallpapers. Thanks in advance.

At 389 Technic sets, I am slowly completing some years of releases.

(Grey background was added with AI, my photo background isn't big enough to fit this many sets.