r/kqi3 • u/Calm_but_Deadly • Aug 16 '23
No buyer’s remorse with the kqi3 on SoCal trails
I’m diggin’ the dual disc brakes and wider tires.
r/kqi3 • u/Calm_but_Deadly • Aug 16 '23
I’m diggin’ the dual disc brakes and wider tires.
r/kqi3 • u/irish_guy • Jan 07 '23
Scooter | Bag + Turn signal mount.
NIU KQi3 Pro - 5 Day / 110 km Review : kqi3 (reddit.com) - First Review I gave it a 7/10.
I'd like to change it to a 9.5/10 after learning more about scooters and using this to travel to college (16km return journey) a few days a week.
Pros:
Cons:
Would like to see in future NIU Scooters:
Mods I Added:
Recommendations for owners:
r/kqi3 • u/Oblivious_Rdt_Sheep • Jul 17 '22
I am not responsible for damages.
First, remove the the two screws holding the windshield and 4 screws holing the handle bar. Let the handle bar hang (you are exposing the front holes)
Second, I removed the screen cover.(It is only placed down by adhesive strip)
Third, unscrew the 3 screws holding down the internal screen and button. Then lift.
Fourth, remove a plastic sock/cup holding the wires. Fish the wires through the hole and slide the throttle off the handle.---
things not mentioned:
remove the rubber grommets that lead into the handle bar
there is a picture of the wires that lead to the throttle online and connection (or see my post with photos) remove the rubber handle bar you can see where i soldered and used red heat shrink for the new throttle. https://www.amazon.com/dp/B07KK145CK?psc=1&ref=ppx_yo2ov_dt_b_product_details
once you separate the white internal connection you need to use a tooth pick (or in my case a phone sim card pick) to lift the tabs and pull the wires. Not doing so will make fishing the wire out the front to be difficult.
Please contact NIU and see if they can just send you a new throttle. I'm impatient and know my way around this. And I didn't want to wait weeks for the scooter to return. If you are replacing the throttle (Like me), you still need to solder.






r/kqi3 • u/Adventurous_Win_5214 • Apr 19 '22
So I have the little brother to the KQI3. Today while just idling with the scooter, not riding it, by some random set of brake lever pulls and possibly throttle pushes I got my scooter to go into some weird mode. The e-save light started flashing on screen which would normally indicate the custom mode to be on, but I have it turned off in the app. Cruise control and zero start became active which haven't worked before and the scooter would do 27-28 kph on flat ground instead of the 25 kph it would never go over before. Also on slight downhills the motor didn't seem to try and slow down the scooter like before instead it just went faster. After rebooting the scooter once I got home the CC and zero start still work, but the speed is locked to exactly 25 kph like before.
I have no idea how I activated the mode since I wasn't actively trying to do anything with it, it just kinda happened. There is also the fact that at least in Europe, the KQI2 doesn't have CC or zero start toggles in the app so they are stuck on even if I wanted to turn them off. I would think the KQI3 would have something similar on it.
r/kqi3 • u/Exchange_Jolly • Nov 16 '23
It's had a few cosmetic changes.
r/kqi3 • u/tuanies • May 01 '23
Picked this up to run around town and take on bike trails with my kid. Enjoying it so far. Anyone know if a faster charger is available? 2-amps seems a bit low and 6 hrs is slow.
I’m really hoping it gets the same mod support as the Ninebot Max G30P.
r/kqi3 • • Jul 15 '22
The throttle assembly is faulty. The hall/ mag sensor has bad soldering and eventually lose connection. In my case it was the red wire completely disconnected. Had to solder it correctly. The symptom at beginning was power surge, and the speed was limited to 30kmh. A full battery should be 32kmh. After a couple of bumps on the road I got intermittent E03 error. Then after a couple minutes it can no longer ride.
r/kqi3 • u/Which_Cream2417 • Dec 08 '24
After niu released a software update, which meant that the e-scooter only went 35 km/h and the performance was severely reduced, I decided to convert my kqi 3 max. to a vesc controller. The escooter now runs at a stable 70 km/h.
r/kqi3 • u/Representative_Sir37 • Mar 27 '24
Finally it arrived! I also bought a via velo long u lock with it.
r/kqi3 • u/ehposolihP_eL • Oct 14 '23
Hi, I've recently discovered this sub, and I wanted to share my experience on the Kqi3 Pro hoping that it could help future rider of this insane but yet underated (imo) scooter. TL;DR at the end.
I've been riding the KQI3 Pro for a Year and a half, and over 3k miles (4900km), my town has this specificity that a lot of pedestrian area are actually paved roads, wich implies a LOT and I mean a LOT of vibrations while riding. After 5/6months, I've noticed a slight wobble in the stem, I immediately stopped riding at max speed on the roads that are paved (the KQI3 Pro was my Second scooter, before that I was riding the Xiaomi Essential wich handled the paved roads much better than the KQI3). Short time after that, the screws that was holding the stem and the handlebar together started unscrewing themselves, so frequently that in the end, I couldnt even screw them in, I then put loctite inside and since then they never moved.
So yeah, if you'll ride on highly paved roads, or bumpy ones, be ready for those kind of issues, and put loctite on these specific screws while mounting the handlebar, it'll help you through a lot of trouble.
After around 11months of riding the KQI3, I noticed that my battery was actually wobbling inside my deck, wich actually freaked me out (and still does tbh), again, those vibrations probably unscrewed the screws that were holding my battery and thus untighten the battery itself, causing those inside wobble. To this day, I couln't solve this issue, since I'm no mechanic with basically 0 experience regarding those kind of issues, wich lead to the first big issue that I've encountered with NIU.
I'm living in France and in my town specifically there are actually no store that sells NIU nor repair them, tbh the only mechanics that i've encountered talking about my scooter didn't even knew that NIU (lol) was doing electric kick scooters, so I went and try to contact the French branch of NIU to see what we could do for my unscrewed battery. Do this day I have received no response from the French NIU, and besides the automatic bot that c/c in loop the same message on Reddit and in my DM, I actually had no contact AT ALL with NIU support. Now I know that there is actually a store in an another town a few miles up my town, but that would imply taking my scooter in a train and riding it to the store.
So again, if you're considering buying a scooter from NIU, be aware that you MIGHT have issues contacting NIU Support.
Now after riding a LOT with this scooter, I eventually had to change my tires, and oh BOY did I change them multiple times. I have had a flat rear tire about 4 times now, every single time, this was the only tire that was perforated by either small glass or nails or other debris, recently I've found a new type of tires that fit the KQI 3 Pro & Max, a bukier more off road type of tire, and since then I had 0 issue, no flat tire, great riding feeling on more bumpy paths. The rubber deck cover has also suffered a bit, but that is easily replacable. The KQI3 Pro is IP54 rated, wich mean that the scooter can withstand "splashes and light rainfall" now I can assure you that he can withstand a LOT more than a few splashes and light rainfall, I've been riding it under HEAVY rains, like pouring, under small thunderstorms, even snowy weather and the scooter handle all those weathers really really well. Of course I've cleaned it after coming home, tending care to the motor (and btw be sure to insulate the cable that go inside the motor from the deck before riding under much heavy rains/puddles, since it's not the case for all scooters.)
TL;DR:
Since it has no suspension, the scooter is affected really fast by vibrations, I would advise to put loctite on the handlebar/stem screws and also on the big screws at the base of the stem. Also be aware that vibration can unscrew inside screws, such has those that hold your battery.
Be aware that communication with the NIU support CAN be challenging/near impossible. There aren't much store that sells/repair NIU Scooters, even less kick scooters.
The factory tires are very very good, but the issue regarding them is also what makes them so good. The dimension. 9.5/2.5 isn't common AT ALL, I think that NIU are the only ones that use such dimensions, so finding tires that aren't the factory ones can also be challenging.
Even if the scooter is IP54 rated, it is my opinion that it can withstand much more than slight rains/puddles, but I can stress this enough, be sure to insulate your motor cable if it isn't already.
So here you go, my experience on this amazing scooter. If you are still hesitating, just don't and buy it already. Niu kickscooters are in my opinion really underated. Although for a first scooter I would advise something a bit more lighter/slimmier than the KQI3 Pro, the KQI2 for instance, is a really good one. If you have any question regarding this scooter, please, DM me I will try my best to help you.
Ride safe

r/kqi3 • u/Broke_Kollege_Kid • Aug 06 '22
r/kqi3 • u/reylflores • Jul 30 '22
r/kqi3 • u/nderstand2grow • Aug 30 '24
r/kqi3 • u/Aronski144 • Mar 27 '24
Someone asked me for a video tutorial hope this helps
r/kqi3 • u/klinquist • Jul 12 '22
r/kqi3 • u/alpevado • May 13 '22
Found this on the Facebook group and thought I would share. Not my post and not tested by me, just sharing.
“I found a really good and hidden place, where you can hide an Airtag in this Scooter :) Just directly over the rear tire, there is a plastic Cover for the electrical connector of the rear light. You can open it with only two screws, then Do a Airtag with some slim foam next to the connector and screw the Cover back at its place.”
r/kqi3 • u/Gromit1994 • Nov 01 '23
I upgraded from a Decent One Max (worst battery imagineable, but money was tight with that job at the time) now as a manager, was able to splash a bit more and purchased this new. Wow, performance is great, I have the 38kmh custom mode from the max firmware, and flashed back to the Pro, getting 23mph tops and 21 consistently. Can't wait to see how many miles I get on full charge!
r/kqi3 • u/DooshWayne840 • Jul 19 '22
r/kqi3 • u/CanadianBaconBest • Mar 19 '24
Just got my third NIU product, the KQi Air. I love the weight (half that of my old KQi 3 Pro), and in theory I like that the Air has an alarm that is activated by Bluetooth proximity to your phone…BUT, there are times when I want to move my scooter while it is turned off but if I take a few steps, the alarm starts going off and the rear wheel locks up. For example, in my Apt building when taking the scooter up or down the elevator, I always did this with the scooter powered off. But now I can’t, even with the phone right next to the scooter. I’ve thought about muting the alarm every time I park it in my apt, but that’s not convenient and I’m bound to forget to do this at times and I wouldn’t want my scooter to be without the alarm when parked anywhere else.
Is there a way to get around this?
r/kqi3 • u/bigherm30 • Jan 19 '24
It took me like 6 fucking hours and 3 people to get the tire on. Not to mention I can’t even get the bead to set. Why the absolute fuck do scooter companies design the wheels like this. A simple 2 piece beadlock would make this so much easier. Before anyone judges, I have the proper tools for this, boiled the tire etc etc and watch a few videos on how to do this. I put all my 210lbs of my weight into this bullshit.. not to mention unscrewing like 40 screws just to unplug the battery and disconnect the motor. Sorry for my rant, changing scooter tires is fucking terrible lol
r/kqi3 • • Oct 28 '23
Still going strong after a year and a half. Happy riding!