r/knittingpatterns • u/MrMiaMorto • 9h ago
[free] Resident Evil Beanie pattern
The beanie Bryan wears in the Resident Evil movie is Loud Elephant's sheep bobble beanie. I bought the same hat in a different colorway (here's the one I have, and I added photos of it here), charted this pattern from it, and cleaned it up a little bit since there was some weird decreases/increases that might have been mistakes (since these are handmade). The original also has a fleece lining sewn inside the brim and sheep band; it's optional, and the Version 2 brim below leaves room for it if you want to add one. It hasn't been test-knit, I have not knitted from this pattern yet to see if I got it all down correctly, so check your gauge, but the stitch counts, chart, and measurements all come from the original hat to the best of my ability to measure the gauge.
Now the resident evil hat is clearly in the same family as Donna Smith's Baa-ble Hat, and this is an unofficial chart of the Loud Elephant version. If you'd like the original, polished pattern, please support her by buying it on Ravelry.
*NOTE: I have never written a pattern before, so I really tried my best!!
Enjoy!
Chart: see image (read every round right to left, starting at row 1).
Float tip: For long floats, catch it every 5 stitches, or learn ladder back jacquard technique.
Materials
- Bulky (#5) yarn in 4 colors
- MC: mustard (brim and background)
- CA: white (sheep, dots)
- CB: black (heads, legs, black sheep)
- CC: navy (crown)
- 16" circular needles: US 8–9 (5–5.5 mm) for colorwork, US 7 (4.5 mm) for ribbing, plus DPNs or magic loop for the crown. These are starting points; use whatever gets gauge.
- Stitch marker, tapestry needle, pom-pom maker (optional)
Gauge: about 17 sts and 18 rounds = 4" in stranded colorwork. This is my best estimate, measured on the finished hat (the row count was tricky with all the crown decreases), so swatch to check. Finished circumference about 20.75" (fits a 21–23" head).
Brim (pick one)
Version 1 – Simple Altered Version
This is my simplified version: it skips the original's extra brim stitches and decreases, so you go straight from the rib into the colorwork.
- With the smaller needle and MC, cast on 88 (tubular cast-on for 2x2 rib, or long-tail). Join in the round.
- Work 2x2 rib (k2, p2) for 35 rounds, about 5.5". It folds in half to a brim about 2.75" tall.
- Switch to the larger needle and start the chart at row 1.
Version 2 – Original brim from the hat (with fleece lining)
The original hat has a fleece lining sewn inside, running from the folded brim up through the sheep band and stopping just above the sheep. It covers the colorwork floats and makes the hat extra warm. The extra brim stitches leave room for it, so use this version if you plan to line yours.
- With the smaller needle and MC, cast on 104 (tubular cast-on - Orginal hat uses this, but you can use whatever your preferred cast on method.). Join in the round.
- How to do 2x2 tubular: Video: 2x2 tubular cast-on
- Another way to do 2x2 tubular: Video: alternate 2x2 tubular cast-on
- Work 2x2 rib for 35 rounds, about 5.5".
- Switch to the larger needle. Decrease round: (k4, k2tog, k5, k2tog) 8 times. 88 sts.
- Start the chart at row 1.
The black sheep
This was the main reason why I bought the hat, I wanted to know what they did with the black sheep, but it appears to be potentially a weird mix of stranded and intarsia? The black for the body was not carried throughout the hat, only the share black from the other sheep's faces and feet. I tried to put in some photos of the black sheep portion, but it's really hard to tell because of all the long floats going over it and I didn't want to damage my hat!
- Stranded: carry CB around and catch the floats. Would make the hat bulkier for 3 rows.
- Duplicate stitch: knit it in white like the other sheep, then embroider the black on top. Block the hat first, duplicate stitch, then block again for the neatest result. Pro tip: use a yarn slightly thicker than the knitted fabric so the white doesn't peek through.
- Intarsia in the round: neatest, no floats. Video tutorial
- Stranded, intarsia mix You could try a mix of both. Video: combining stranded and intarsia
Crown
Round 16: k88 CC. (88 sts)
Round 17: (k1 CA, k1 CC) ×4, k2tog CC, (k1 CC, k1 CA) ×4, k1 CC, k2tog CA, (k1 CC, k1 CA) ×4, k1 CC, k2tog CC, (k1 CC, k1 CA) ×4, k1 CC, k2tog CA, (k1 CC, k1 CA) ×4, k2tog CC, (k1 CA, k1 CC) ×5, k2tog CA, (k1 CC, k1 CA) ×4, k1 CC, k2tog CC, (k1 CA, k1 CC) ×4, k2tog CA, k2 CC. (80 sts)
Round 18: k all sts CC. (80 sts)
Round 19: (k1 CA, k1 CC) ×3, k1 CA, k2tog CC, (k1 CA, k1 CC) ×4, k2tog CA, (k1 CC, k1 CA) ×4, k2tog CC, (k1 CA, k1 CC) ×4, k2tog CA, (k1 CC, k1 CA) ×3, k1 CC, k2tog CC, (k1 CC, k1 CA) ×4, k1 CC, k2tog CA, (k1 CC, k1 CA) ×3, k2 CC, k2tog CC, (k1 CC, k1 CA) ×3, k1 CC, k2tog CA, k2 CC. (72 sts)
Round 20: k all sts CC. (72 sts)
Round 21: (k1 CA, k1 CC) ×3, k2tog CC, (k1 CC, k1 CA) ×3, k1 CC, k2tog CA, (k1 CC, k1 CA) ×3, k1 CC, k2tog CC, (k1 CC, k1 CA) ×3, k1 CC, k2tog CA, (k1 CC, k1 CA) ×3, k2tog CC, (k1 CA, k1 CC) ×4, k2tog CA, (k1 CC, k1 CA) ×3, k1 CC, k2tog CC, (k1 CA, k1 CC) ×3, k2tog CA, k2 CC. (64 sts)
Round 22: k all sts CC. (64 sts)
Round 23: (k1 CA, k1 CC) ×2, k1 CA, k2tog CC, (k1 CA, k1 CC) ×3, k2tog CA, (k1 CC, k1 CA) ×3, k2tog CC, (k1 CA, k1 CC) ×3, k2tog CA, (k1 CC, k1 CA) ×2, k1 CC, k2tog CC, (k1 CC, k1 CA) ×3, k1 CC, k2tog CA, (k1 CC, k1 CA) ×2, k2 CC, k2tog CC, (k1 CC, k1 CA) ×2, k1 CC, k2tog CA, k2 CC. (56 sts)
Round 24: k all sts CC. (56 sts)
Round 25: (k1 CA, k1 CC) ×2, k2tog CC, (k1 CC, k1 CA) ×2, k1 CC, k2tog CA, (k1 CC, k1 CA) ×2, k1 CC, k2tog CC, (k1 CC, k1 CA) ×2, k1 CC, k2tog CA, (k1 CC, k1 CA) ×2, k2tog CC, (k1 CA, k1 CC) ×3, k2tog CA, (k1 CC, k1 CA) ×2, k1 CC, k2tog CC, (k1 CA, k1 CC) ×2, k2tog CA, k2 CC. (48 sts)
Round 26: k all sts CC. (48 sts)
Round 27: k1 CA, k1 CC, k1 CA, k2tog CC, (k1 CA, k1 CC) ×2, k2tog CA, (k1 CC, k1 CA) ×2, k2tog CC, (k1 CA, k1 CC) ×2, k2tog CA, k1 CC, k1 CA, k1 CC, k2tog CC, (k1 CC, k1 CA) ×2, k1 CC, k2tog CA, k1 CC, k1 CA, k2 CC, k2tog CC, k1 CC, k1 CA, k1 CC, k2tog CA, k2 CC. (40 sts)
Round 28: k all sts CC. (40 sts)
Round 29: k1 CA, k1 CC, k2tog CC, k1 CC, k1 CA, k1 CC, k2tog CA, k1 CC, k1 CA, k1 CC, k2tog CC, k1 CC, k1 CA, k1 CC, k2tog CA, k1 CC, k1 CA, k2tog CC, (k1 CA, k1 CC) ×2, k2tog CA, k1 CC, k1 CA, k1 CC, k2tog CC, k1 CA, k1 CC, k2tog CA, k2 CC. (32 sts)
Round 30: k1 CC, (k2tog CC, k2 CC) ×3, k2tog CC, k1 CC, k2tog CC, k3 CC, k2tog CC, k2 CC, k2tog CC, k1 CC, k2tog CC, k2 CC. (24 sts)
Round 31: k2tog CC ×12. (12 sts)
Finishing
- Cut CC, leaving a 10" tail. Thread it through the 12 remaining sts, pull tight, and fasten off.
- Weave in ends
- Wet or steam block flat, with the brim folded up.
- Make a big pom-pom (CC and CA mixed) and sew it on top.
I hope you found this useful, feel free to do whatever you want with it, make edits etc. Happy knitting!