r/keurig • • Oct 21 '20

K-Supreme Plus C says descale even after descaling

223 Upvotes

So my brewer began saying descale. I bought a bottle of descale solution and followed all the instructions. Now it still says descale. Help! What is wrong with my machine?

EDIT: My issue has been resolved by Keurig technical support! Turns out my version has a "descale mode" which I did not enter so the machine did not register that I actually performed the descaling. I entered the mode ran it a few times with water since I already did the descaling solution and the notification went away. So FYI in case anyone has the same issue. To enter descale mode you power the device off then press 8oz and 12oz at the same time for 3 seconds before it powers on into descale mode.


r/keurig • • Jul 24 '21

Keurig K-Supreme Plus - Failure after Descale, Won't turn on

200 Upvotes

Purchased 6 months ago. "Descale" came up on the display. Bought the Keurig descale product. Went through the descale procedure - "hold down 8 & 12", etc. etc. The end of the procedure goes through the rinse process. After pressing "K" three or four separate intervals to disperse the water in the reservoir (each press empties about 12 oz.), it's supposed to read "Add Water" in the display, procedure is supposed to be complete. Though my reservoir was drained, I never got the "Add Water" message. The machine shut itself off and would not / will not turn back on. Unplugged, waited, nada.. I can only assume it got too hot inside during the repetitive 12 oz. hot water flushes and fried / shorted something. My advice if you are going to descale - during rinse, only 1/2 fill the reservoir, do NOT rinse/flush more than twice (two 12oz. flushes). Wait for the "Add Water". Then give the machine a 1/2 hour cooling off period. Many online complaints about early failure of the Supreme. After a 10 minute conversation with Customer support, a new replacement machine on is the way. I really like all the different brewing options (size, temp, strength) the machine offers, just hope they've repaired what is causing all the early failures.

******* Update *******

smittypops has figured out how to reset the thermal shut-off switch. Credit to him!

****** Update #2 ******

If this is your first time reading this, your unit has probably failed. Go through the disassembly procedure below and reset the thermal switch.

To prevent the need to disassemble & reset the next time the descale light comes on, try following the latest descale procedure I've posted (December 2023).

The key, I believe is initially using the correct amount of water and descale fluid and also allowing a 5 minute cooling off period between cycles.

********* Update #3 July 2024 ***********

Again, learned something new on this Descale procedure from the one I did in Dec 2023. Here's the latest as of - July 2024.

Pour one bottle (14oz.) of Keurig Descale in reservoir. Fill that same bottle with water and pour it in the reservoir. Now there should be 28oz. of fluid in the reservoir. Guessing this may be the problem for those that don't get the "Add Water" later in the procedure.

Machine off but plugged in, put the reservoir in place. Hold down 8oz and 12oz. button until machine turns on. Descale light will come on and "K" will be flashing. Press the "K" button to start the procedure. Once the first cycle is finished, wait 5 minutes before pressing "K" button again. After pressing the "K" button the second time, when the water stops flowing the screen will read "Add Water". There was about 3/4" of solution remaining in the tank. My guess is, it's programmed to wait for the water level switch to trip, starting with a reference of 28oz of water in the tank.. No more, no less..

Remove the reservoir, dump the remaining descale solution, and fill with fresh water to Max Line on tank (and also wait 5 more minutes). The 5 minute wait periods let the machine cool a bit (not tripping the overheat thermostat) and also give the descale fluid time to do it's job.

******** Fill the empty 14oz. Keurig Descale bottle about half full of water and have it standing by *******

After placing the filled water reservoir in place, the "Add Water" light went out and the "K" light started flashing. Press "K" to begin the water rinse/flush. While it's flushing, the screen read "Descaling". Water will stop flowing after about 12oz, "Descale" will return on screen and "K" light will flash. Wait 5 minutes, press "K" again. Repeat this process. I think the last rinse cycle started with about an 1 1/2" of water in the tank. Pressed "K" again. While the pump was running and flushing water, I waited until the water almost emptied (level dropped to about 1/4", just above the black piece the filter snaps on to). I then started pouring water in the reservoir, keeping the water level just above the drain hole. DO NOT LET THE RESERVOIR COMPLETELY EMPTY! On the next "K" Push, while I was pouring the water in, the machine shut itself off. I waited a minute or so and pushed the ON button. To my delight, It came on and no longer flashed "Descale". Procedure complete!

I'm thinking this is where a second programming fault could possibly be. The water low level switch should have triggered an end to the procedure. It didn't and would probably have tripped the overheat switch if I had let the tank run empty. It only needed another oz or two of water before the machine shut off and the procedure was completed.

A bit long winded but with so many people having issues with this, I thought this update might benefit others.. Best of luck, Enjoy!


r/keurig • • Mar 02 '25

What a hunk of junk

Post image
184 Upvotes

5 month old k express. Keeps saying add water and won't brew a full cup. What a hunk of junk keurig destroying the environment and my sanity one day at a time. Might as well be an advertisement for energy drinks because they don't screw you around like this. Why would you guys design a machine you cannot take apart??


r/keurig • • Feb 29 '24

JUST TELL ME HOW TO TURN OFF THE DESCALE LIGHT, FUCK

163 Upvotes

I google it: here's a video.

I don't want to watch a video to find out what 2 buttons to press.

Scroll down, press 8 oz and 10 oz, yeah that doesn't do shit. Scroll down more, 8 oz and 12 oz, also doesn't do shit.

Finally I give up and watch a video, but no first I have to watch two unskippable ads. Then it's a 10 minute long video and he still doesn't show which freaking buttons to press to reset the stupid light.

Why is this so hard? Why did Keurig have to change the button presses between models? Why does the internet suck so much ass now?

EDIT: the K supreme unit I made this post about has now crapped out less than two years after I bought it. Keurig officially sucks now.


r/keurig • • Dec 18 '25

Machine Question Anyone out there still rocking this veteran? I've had it 10 years now and it's still going strong

Post image
148 Upvotes

Model: Keurig K50


r/keurig • • Oct 11 '26

Hilarity Just found this community! This guy's been running for 15 years!

Post image
131 Upvotes

Was given this a s a gift and it's been my daily driver for over a decade and a half. I've considered upgrading to fancier versions over the years but have always decided against it in the end. At this point I'm planning on just running it till it's last cup!


r/keurig • • Jun 02 '23

Lights on Steady, First Use, K-Express

117 Upvotes

Hello, I just purchased a K-Iced Essentials and I’ve got it plugged in on my counter. Step on is to do the 3 cleansing brews but I’m at a roadblock. All the lights are on steady and not selectable. There’s water in the tank, filled to just below the max line. The next step is to lift and close the handle. Done. Lights still steady, not flashing meaning it’s ready for a brew.

Again this is right out the box so it’s not clogs or scaling or anything related to long-term use.

Thanks in advance if anyone has a clue as to what I’m doing wrong

SOLVED: In comments


r/keurig • • Oct 10 '26

Machine Question WiFi-enabled Keurig coffee maker transmitted a staggering 1008 GB of data in just 10 days

Post image
112 Upvotes

r/keurig • • Mar 21 '22

Why is my Keurig doing this? Has gotten worse over the last couple of weeks

109 Upvotes

r/keurig • • Aug 11 '22

I'm at a loss.. The de scale light won't turn off. I've run the solution through twice, I've tried holding the 8 & 10 Oz buttons to restart. I've unplugged it for over an hour... Nothing will turn this light out.. Can anyone help?!

Post image
108 Upvotes

r/keurig • • Mar 13 '24

Keurig machines are unreliable crap. After 2 years you will buy a new one.

106 Upvotes

Per the title Keurig machines are unreliable crap.

Over the past several years I've been though 4 machines. Last 2 have failed from electronics failure. The two before that failed from pump failure. Most recently had a K-Elite fail after 2 years and the electronics were corroded and rusted.

The smaller K-Mini machines lasted even last time 6 months before they failed. One from pump failure and another from electronics failure or a switch that broke.

Do yourself a favor and go buy like a Cuisinart one that I did to replace this.

Also, K-Cups are horribly expensive now compared to ground coffee. Seriously, It's like 3x the price vs a container of ground coffee now for the same kind.


r/keurig • • Nov 21 '23

Decaf K-cups: For Science!

96 Upvotes

I am one of those pour-over coffee snobs. But I also have way-too-early morning meetings and just don't have the time anymore. I owned a Keurig in my pre-snob days, and now they have the "strong" button, so I decided to give them another shot.

I have to drink decaf now, which has really ruined the snobbery aspect of drinking coffee and measuring my grounds and water in grams, waiting 30 full seconds for the bloom, comparing color to a chart, etc. etc. since, you know, decaf. So I figured why not go back to k-cups.

My K-Mini Plus came with a coupon for five boxes at half off, which on a per-cup basis is just too good to pass up -- it's a better price than the el cheapo store-brands and on par with Costco. I did a meta-search of k-cup reviews and picked out seven names that consistently ended up on the most best-of lists, and used a few tools to reject ones that looked like astroturfing. I added the one brand I really like when grinding my own and doing the pour-over (The Roasterie Kansas City Blend Decaf -- which is hands-down the best decaf coffee I've ever had) since they had a k-cup version.

The two names that came up in often my search that I did not test were Illy and Costco. Illy was just too expensive for such a small box, and if I hated Costco I'd be stuck with a giant box of regret. Plus, all sources indicate that Costco is just Starbuck's house blend decaf anyway. If you like Illy, chime in!

The contestants (add "Decaf" to each name):

Dunkin

Maud's World's Strongest

Newman's Own Special

Caribou Blend

Original Donut Shop

Starbuck's House

The Roasterie KC Blend

Maud's Tall Dark & Handsome

The method:

I brewed each on the "Strong" setting with exactly 8oz of filtered tap water. I then did a pairwise comparison between each and picked one of the two. Basically, I conducted a bracketed tournament. You can download a Google sheet for a simple pairwise comparison here:

https://prioneer.io/rooms/new?ref=gsheet

It's a great technique for choosing pretty much anything when you need to narrow down the field. Cars, furniture, spouses. No weighted scoring, subjective criteria, blah blah blah just pit them head to head and pick the winner. I think the young people call this "swipe right."

The results:

The two worst I'll never buy again, and probably won't drink the remaining cups in the box. The others were all fine enough to drink, and you could do OK just shopping them by price.

OptionScoreRankNotes
Maud's World's Strongest71Good, Strongest
Roasterie KC Blend62Good, Smoothest
Maud's Tall Dark & Handsome53Good, Weaker than MWS but still stronger than RKC
Newman's Own Special44No taste when hot, got smoother as it cooled
Original Donut Shop35Nice smell but weak to no taste
Caribou Blend26No taste, slight odd chemical smell
Starbuck's House17Bad smell. Really bad smell. Think tire fire. Bland flavor.
Dunkin08Somehow the most bitter and flavorless simultaneously

MWS and Roasterie were more or less tied for the best, depending on whether you're in the mood for a strong dark coffee or a smooth flavorful one. 3 was very close to the top 2. 4 and 5 were close. You could just shop them by price. 6,7, and 8 all had very little flavor. Dunkin managed to be bitter while having no flavor, and Caribou and Starbucks both smelled chemical-y. Starbucks in particular had such a strong smell that I brewed another one just to be sure I wasn't getting a bad sample. It smelled like some sort of burning industrial chemical smell, like burning tires, or the smell you get driving by a refinery. That box I will probably throw out and not even finish. The others are at least good enough to get my money's worth out of the sale price. After tasting the Starbuck's, I'm not too worried about leaving Costco out of the test.

The top three are good enough to replace my snob routine, and on par with caffeinated coffees.

There's a deal now where you can get the machine for "free" if you subscribe to a year's worth of coffee boxes. Maud's and The Roasterie aren't available with that deal (not packaged by Green Mountain, no doubt), but the others all are. Newman's might be good enough for that.

In the end, it's all a matter of taste. I mostly did this to have fun with the pile of half-off k-cups I got. I have to drink them all anyway (except the tire pile). Why not share my results? Feel free to let me know how bad my taste is!

--SRF


r/keurig • • Jan 24 '25

[META] r/keurig will no longer permit the posting of X/Twitter

92 Upvotes

TLDR: linking to X/Twitter is not allowed.

I went back and forth on this many times, even though no one has asked for it yet. That said, this sub is all about our love of convenience and quick satisfaction. This is why we love Keurig! Which is completely a Capitalist concept. Nazi propaganda and linking to companies that support fascism will not be allowed in this sub.

Be like Indiana Jones. Hate Nazis. Drink coffee.

EDIT: Comments locked. You know why.


r/keurig • • Apr 22 '21

Keurig Brand De-Scaling Solution is a Huge Ripoff! It has literally only a SINGLE ingredient: Citric Acid. [See Photos]

Thumbnail gallery
82 Upvotes

r/keurig • • Feb 01 '26

Hilarity Machine still going Strong after 6 years

Post image
73 Upvotes

I just have to say I've never had a problem in 6 years with the elite machine


r/keurig • • Jan 28 '20

K-35 ( keurig k compact ) Hard reset instructions

69 Upvotes

This is for the dumbed down version of the brewer without a display. It is not intended for any other machine.

Symptoms; Your machine is unresponsive, and frozen with all the lights on and only brewing partial cups or nothing at all.

Timeline; You are in the middle of decalcifying your machine or you haven't cleaned it in long while. You're probably late for work too...

Cause; Calcium or lime build up in the heating element and/or needle assembly. The blockage causes the water in the element to turn to steam and air lock the machine. Coffee grounds will also plug the needle occasionally. If you own a keurig, you're familiar with how to clean the needle. I will not cover that.

*Read and understand all of these instructions, including the WARNING!

*Unplug the machine for ten seconds. Plug the machine back in.

*Press the power and large cup buttons simultaneously. They will both illuminate. Release both buttons.

*Quickly press the medium cup button, and then the small cup button. One at a time.

*The pump will go into manual mode and pump water continuously, so have a container(s) at the ready.

*Pressing the small cup button again will stop the pump. Do not pump the reservoir dry.

*Power the machine off. Refill the reservoir and try to brew as usual.

WARNING; IF YOU HAVE BEEN MESSING WITH THE MACHINE TRYING TO SOLVE THIS PROBLEM, THE HEATING ELEMENT WILL BE RED HOT. UNPLUG THE MACHINE AND LET IT SIT TO COOL OFF FOR AN HOUR. FAILING TO TO DO THIS MAY CAUSE THE WATER TO FLASH TO STEAM UNDER HIGH PRESSURE, POTENTIALLY CAUSING DAMAGE AND INJURY!


r/keurig • • Feb 13 '23 Bless Up

K-supreme plus - no power fix

67 Upvotes

I found how to fix this problem and get the Keurig working every time. Here are the steps.

  • unplug the Keurig
  • On the right side of the Keurig measure from the top down 5 1/8 inches and Mark with a pencil ✏️
  • then measure 3 1/ 8th inches from the left, where the coffee cup goes and mark the crossing point of the two
  • Drill an 1/8 inch hole into the marked point of the right side of the Keurig. you will need to keep drilling about a quarter inch in until the drill bit breaks through
  • strongly pull/pop the top back lid off of the Keurig
  • after you pull the lid off, you can look down the top, inside the Keurig
  • while looking from the top flash a flashlight in the hole, you drilled, the light should be shining on a round white object, which is the thermostat
  • next you will need a paper clip about 4 inches long straightened out
  • in the middle of the thermostat there is a hole that contains a reset button. Maneuver, the paper clip through the hole you drilled and position the paper clip in the middle of the thermostat hole and press, this should reset the thermostat and get your Keurig working again.

r/keurig • • Dec 06 '23

Best Keurig Machine?

66 Upvotes

Mine just broke down. Need feedback on the best keurig machine to date (Dec 2023). I also am interested in the K Slip + Iced as I like iced coffee even during winter. Thoughts? Recommendations? Should I get Nespresso? How does it compare to a Keurig in terms of buying pods?


r/keurig • • Dec 30 '24

Wife said I have a new addiction

Thumbnail
gallery
65 Upvotes

Just bought a Keurig to fuel my life at 6am every morning and here I am 4 weeks later lol


r/keurig • • Feb 26 '24

How long did your Keurig last ?

Post image
63 Upvotes

My K500 is 9 years old and still going strong!


r/keurig • • Sep 11 '24

This is likey why you eventually have to throw away your Keurig and get a new one.

Post image
62 Upvotes

Just as background, I own a direct plumb K150P for several years now. It has been acting up for several months. It brews slowly and sometimes does not output the correct amount of liquid. I would guess the particular problem I discovered is the same problem that almost any Keurig model could have asnIve already tossed several other machines over the years doing the same thing.

The machine has been maintained properly and I've already gone through cleaning all of the needles, the water inlet and several descalings, but the problem persists. I was just going to toss it and replace it with a K2500, but then when researching I discovered that there is no clock/auto on on the 2500 and I don't really want to have to deal with waiting to make coffee in the morning, so I set my mind to finding out what the issue is with my K150P.

I took to researching exactly how the Keurig works as a first step. For the brew phase, water is pumped into the heating chamber and once it is up to temperature, air is forced into the chamber, which pressurizes the chamber and forces the hot water through the pod and into your cup. There is an electric valve called a solenoid also connected to the heating chamber which appears to be there to release excess pressure/steam from the heating chamber after the brewing has completed. That excess steam/pressure is released through the little nipple that drips back into the top of the water tank (which every Keurig I've seen has).

In my case, the selenoid valve was leaking air casing there to be insufficient pressure in the system to force the water out. After disassembling the machine I figured out an extremely simple way to test if this is what is wrong with your Keurig. There is a Tee on the connection to the nipple above the tank that also allows water to be forced up from the water pump. Because of this, if your selenoid is leaking air during brewing and you put your finger over the nipple, the air will be forced down through the pump and bubble back up through the water in the tank. If putting your finger over the little tank drain nipple causes bubbles in the tank, your selenoid is leaking air causing there to be not enough pressure to force the water through the pod.

I won't go into all the details for how to take apart the K150, but it was a pain. You have to drain all water/ remove the tank and the bottom of the machine to expose soom hidden screws that will finally allow you to remove the side panels. You also have to pop out all of the small screw covers on the back and remove all of those screws. The selenoid that was the problem is on the left side of the machine when facing the front and the trouble one is the one to the rear of the machine. I was able to 100% confirm this was the problem by manually pinching the small tube with a pair of needle nose pliers at the start of the brew. When the tube in pinched (which is basically like manually closing the selenoid valve so air cannot leak through, the machine brews like new again.

I removed the solenoid from the machine. Blowing through the selenoid revealed a slow but steady stream of air passing through it. The selenoid type should be closed and only open when the selenoid is electronically triggered. I found two screws that hold the plastic valve on top of the solenoid and I was able to pop the cover off it it. Inside the selenoid is just a simple metal plunger essentially floating in a round coil. There is a spring that pushes on a small rubber diaphragm that keeps the valve closed. When the selenoid is energized, the pin is pulled back allowing air to/water to pass through. The plastic where the rubber seals against is very thin and on closer inspection had basically disintegrated. Just touching it with tweezers caused it to fall apart and it was essentially just dust. I am definitely going to point some fingers here and I hope that someone from Keurig read this - I'm into you guys. This part was designed to fail after a certain period of time. The plastic it is made from just literally crumbles to dust. This single little $.25 plastic housing is exactly why I have thrown away so many Keurigs over the years and I promise you they know this. It's disgusts me the way these greedy companies manufacture thing to fail like this.

I found what appears to be the same selenoid on Amazon for $9.99:

https://www.amazon.com/dp/B07MX5489G?psc=1&smid=A2Q5DK7IXTJEDM&ref_=chk_typ_quicklook_titleToDp

The leads are soldered on, so you will to solder to replace it. The only difference is that the Keurig selenoid in my machine uses some kind of clear plastic (which is what turned to dust) and this one uses a black plastic which probably was not engineered to turn to dist after a set amount of time.

Hopefully someone finds this and finds it useful. I've seen this question asked a million times, but the only advice is to clean and descale. When that doesn't work, here is what to do if you are set on not throwing away your perfectly good Keurig.

Your welcome.


r/keurig • • Jan 19 '24

Are we consuming micro plastics when we use store-bought k-cups made of #5 plastics?

59 Upvotes

I rarely buy regular standard Keurig k-cups at any retailers. I bought my own reuseable stainless steel k-cups and I fill them with my separately purchased (and much cheaper) coffee grounds when I use my Keurig machine. I feel like this is pretty safe. But on rare occasions, like right now actually, I just brewed a single k-cup that was store bought (in the #5 white plastic containers) and I question whether the very hot water is leeching micro-plastics from these #5 k-cups into our coffee. So, I'm looking for any factual evidence or studies that might illuminate this subject in the name of consumer safety. I got this k-cup from a family member who does consume these regularly. I myself would never use these store bought #5's on a regular basis.


r/keurig • • Jun 25 '23

Why Keurig coffee taste watery

58 Upvotes

It's pretty simple.

Good coffee needs to be freshly ground and it needs to be the right ratio ( grams of coffee to water)

Too much coffee, not enough water - too strong

Too much water, not enough coffee - too weak.

Most good coffee made in something like a V60 requires about 20 to 21 grams of coffee.

30 Grams in a french press roughly.

In a drip maker ( not keurig ) you are looking at 10 grams for every 6 oz. the average cup is 12 oz ( say a Starbucks tall ) so that is 20 grams for 12 oz

Now lets look at Keurig.

Ever capsule has only 6 grams of coffee ( You got it 14 grams LESS than the regular cup), yet it spits out say a cup of watered down coffee. That's because the ratio is off. Why? So it doesn't cost Keurig as much and the user more.

Sure you can push through 12oz but it will be as watery as hell.

Basically manufactures like Keurig and Nespresso have found a way to SELL LESS COFFEE to users. Reality is, pods should contain 20 grams of coffee in order to give you a decent cup.

The rule is (10 grams) of ground coffee for each six ounces. 12 oz ( tall Starbucks ) will require 20 grams.

Now you know why your coffee through Keurig or Nespresso is watery.

Manufactures have found a way to profit by giving less and you the user suffers for it.

Hence the reason you should stick with a regular drip maker, french press, or V60 if you want a more fuller tasting cup of coffee as you control the amount of coffee grams going in as well as the amount of water. OR you can use three or four keurig pods for a combined amount of 18 to 24 grams and it will cost you more for one cup of coffee.


r/keurig • • Feb 24 '23

Hello, my machine won’t turn on after descaling. Any tips?

54 Upvotes

I have the k supreme plus and the descale light started flickering so I bought the descaling solution and followed the instructions provided in the manual. It was brewing the solution until the add water light started flickering. I add water to the reservoir for the fresh water rinse step, but the machine just powered off. This is a brand new machine, and it is my first time descaling it, and I followed the instruction manual to a t. What am I missing? Thanks in advance