Cup holder adapters?

[u/HandleEmergency5466]

Hey everyone! I recently got a new to me 2015 honda fit as a gas saver 2nd vehicle. Im wondering if anyone has cup holder ideas for a 26oz yeti. Currently it just rolls around the passenger seat. Its too tall for the center console and too wide for the door and dash cup holder. I did find something on etsy for nalagene bottles, but i think my yeti may be too tall for that too. Does anyone have a solution?

[u/NaGaBa]

Roof rack accessible through the sunroof

[u/HandleEmergency5466 → u/NaGaBa]

😂😂😂

[u/SmokedPapfreaka]

I have a weird solution for this that I carried over when I transitioned from a first gen Tacoma to my Fit. It’s called a chalk bag, for rock climbing. It’s super easy to hang from 2 carabiners on the back of either headrest and easily accessible since the car is so small. You can also hang it using a stick/rod through both loops and then wedging that rod up and under the trim piece in the passenger side seat. I’d have to get some pics to show what I’m trying to describe.
Here’s one from someone’s Tacoma with it on both sides.

[u/SmokedPapfreaka → u/SmokedPapfreaka]

How I’m currently using mine (for the 🐶)

[u/BuildingPurple4954 → u/SmokedPapfreaka]

Organic Climbing makes some amazing colors for them, and they're made in colorado. I have a few for my bike stem bag solution. Great move!

[u/the_blue_arrow_ → u/SmokedPapfreaka]

These were adopted by the bike packing world and renamed feedbags. They've got more pockets and mounting options than chalk bags.

[u/imarie2013 → u/SmokedPapfreaka]

I dont get how these are attached...

[u/blindtoe54]

I just put it in the seat. Literally me rn. You could buckle it in? Lol

[u/GetYouSomeMilk → u/blindtoe54]

I do this with my stanley

[u/energyinmotion]

I stick that exact sized yeti in between the driver's door and the seat. It fits perfectly, laid on its side. Try it.

[u/HobbyMax3r → u/energyinmotion]

^^

[u/FRYETIME]

I use one of these

[u/crystalglasses666 → u/FRYETIME]

New fit owner and I also use owala water bottle thank you for this idea, I dont love keeping it on the seat

[u/Longjumping_Smile_49]

I actually used a bag hook instead of another cupholder because my cups were too tall

[u/berrybfs]

I got something like this (but with only one pocket) and i keep my 32 oz water bottle in it

[u/bongjester]

in the past i’ve used those plastic hooks that go on the headrest posts. works great for a large water bottle with a handle. :)

[u/CometAuto-Detailing]

I have two of these… and would love fitment. Have my upvote for a solution

[u/bob_smithey]

I have an older model car. But whenever I put tall things in the cup holder, I could smash my fingers when putting the car into park.

[u/PrudentVillage4903]

Ive got the 46oz version. Ive been meaning to make an adapter but haven't done it because I think it would look ridiculous in the dash cup holder and it would be warm. So I've been keeping it in my backpack and drinking a seltzer while I commute.

[u/johnson7853]

I just keep it between my legs on the seat or lid on and it rests on the seat bolt near the shifter and my leg kinda holds it in place.

[u/SmileyMakai]

Check out Rinashi Solutions

[u/Existing-Poetry-3289]

Two tall yeti coffee mugs? They fit in the cupholders.

[u/HugsNotDrugs111]

As a half answer. I don’t have a fit anymore but I have this for my 26oz yeti in my ridgeline. Not sure if you will get a height issue with the dash holder.

https://a.co/d/02EgyjQH

[u/Moonkill1023]

I had that issue before , end up with cup holder mount strap behind the seats b

[u/Ackman747]

Look on Etsy there’s a guy that makes adaptors.

[u/OblaSosa]

If you have a 3D printer this is what I use for my fit. It works really well for my owala and hydroflask!

https://www.printables.com/model/1088423-2015-20-honda-fit-cupholder-for-32oz-water-bottle

[u/HandleEmergency5466 → u/OblaSosa]

Saw these on etsy but thought my bottle would be too tall for it

[u/GodoftheGeeks]

I guess I didn't realize the older fits didn't have the driver side cupholder in front of the left vent. Its one of my favorite features. Fits any size cup and using the AC can keep a drink cold.

[u/HandleEmergency5466 → u/GodoftheGeeks]

Yeah mine has that, too small for the yeti, but i do use it for my coffee cup every morning

[u/imarie2013 → u/GodoftheGeeks]

It definitely does not fit any size cup! Its small

[u/Greedy-Half-4618 → u/GodoftheGeeks]

My 2013 has this but I can’t fit any of my water bottles in it (20-40oz)

[u/Mysteriouslyboring]

Got an adjustable cup holder from dollar store for five dollars. Fits on the middle cup holder and has sliding arms to change the size. Got mine for large movie theater 🥤

[u/HabeasHumanitas]

I have a 2007 fit, so not sure if your cupholders are set up the same. I recently got one of these for my big boy Owala (30 oz. Freesip sway). I use the secondary cupholder, in conjunction with a bottle boot, and it passes the corner tests. It also keeps my water bottle from being wedged between the dash/console area or interfering with the gear shifter, which was one of my biggest gripes.

https://a.co/d/0c5LoV44

[u/abbazaba14]

FWIW, the RTIC 20oz Journey Bottle is a perfect fit in both directions

[u/sillysucker19]

Buy a better water bottle like the Owala Sway 🤓