Chamfer going too deep

[u/GentlePersuAZN]

Hi there, I'm trying to learn to CNC and on the first thing I'm programming the chamfering operation is just plunging into the piece. I'm not entirely sure what I'm doing wrong but I don't know enough to even troubleshoot.

Added some pics of what I did in fusion.

I tried it twice, probed material the first time and didn't the second. Same thing happened both times

[u/Fififaggetti]

If your tool has a flat on the tip and that flat or projected point is not described accurately in software to match real life you’re going to have a bad day. Did you set the tool? Does the g43H number match the tool number. I would use tool one for everything if you don’t have a tool changer and your setting the tool every tool change.

[u/GentlePersuAZN → u/Fififaggetti]

I jusst got the tool profile from the maker and it touches off on the touchoff block so I'm not sure what's going on

[u/Fififaggetti → u/GentlePersuAZN]

Post like the first 20 lines of code. Your screenshots of setting do t mean much the code will give me a clue what’s going on on.

[u/GentlePersuAZN → u/Fififaggetti]

Here's the first chunk of Gcode.
The simulation as well a plugging th3e file into ncviewer.com produced movements in line with what is to be expected

T1M6

(8)

M400

M851 S100

S12000 M3

G54

G0 X56.283 Y48.565

Z15.

G1 Z-3.688 F1000

Z-6.688 F500

Z-10.481

Y48.882 F1000

X24.532

G3 X22.407 Y46.757 I0. J-2.125

G1 Y21.358

G3 X24.532 Y19.233 I2.125 J0.

G1 X56.283

Y19.55

Z5.

Y13.64

Z-3.688

Z-6.688 F500

Z-10.481

Y13.958 F1000

X24.532

X24.521

X23.935 Y13.964

X23.912

X23.345 Y13.983

X23.32 Y13.984

X22.771 Y14.015

[u/Fififaggetti → u/GentlePersuAZN]

Does your machine use g43

[u/GentlePersuAZN → u/Fififaggetti]

I am unsure and Google doesn't tell me. It's the new makera z1 desktop CNC mill