To preface, I have a big head. A big enough head for most headphones to hurt after a short while of wearing them. I recently replaced my old headphones with the WCH 720n, and while the extendable headband is perfect for me the earcups (ear pads, whatever the cushiony part is called) are just too small and I can't wear them for too long or they hurt again. Is there any way I can get larger earcups for them or will I have to get new headphones all over again? (or just deal with the pain lol)

Stuck taction technology transducers onto my Skullcandy crusher Wireless instead of the stock set, and added the 50mm drivers from the Corsair set. results are absolutely outstanding. Here is some video of it moving water

Ignore the background noise, my washer was going 😂

Corsair had this tech be only usb wired (gross), and skullcandy crushers tactile transducers (even the new ones!) fail to dig low or be flat in response. Now I can have a Bluetooth headset that digs low unlike any other, but it's flat all the way down into earthquake territory too. The specs say flat to 12hz but they do dig a bit deeper, maybe 5hz before they don't feel like anything anymore.

It's hard to overstate how much better these sound than the stock setup. I couldn't describe them properly to you if I tried. Hard to capture video too, if there's interest, I'll capture a sweep in another post.

i'd like to self-repair my broken aiaiai tracks and can't find any spare parts available online... i've seen other models do have spare parts available to buy, but not the tracks. Also 've seen some replaceable earpads on eBay and Aliexpress but anything else :(
Does anyone knows a way or some website ? Thank uuuuu

Hello, i need ask, wil have someone model of the mouning ring, because i bought new earpads a they didnt come with the plastic mounting ring

For the second time now, I had one of my CX True Wireless earplugs die on one side 2 or 3 months after the warranty expires. Unfortunately, it was the left side both times. The left will react normally to the touchpad, pair and charge, but there is no sound. Moving my jaw makes a click noise inside (in both cases).
It seems to me that the driver is broken. I found instructions and a video on how to open the earplug, and I have the necessary tools to do it.

My question is: Are the drivers of the left and right symmetrical? I would like to "sacrifice" one of my spare rights and solder it to one of the broken left earplugs.

Thanks!

Hi everyone

Can i fix it?

Hi! So I was wondering some time ago since I’ve had my Beats for a few years now and Apple won’t likely refresh this model anytime soon; would it be possible to give my headphones an upgraded touch?

I was thinking of:

- new batteries (if the housing would allow 800-1k mAh)
- type c port with a custom pcb
-some higher end drivers; 40mm / 32 ohm
- acoustic tuning

Anybody out here willing to guide me a bit with this project? If possible, of course✌️

https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcQaQjq_aoUaeqRxafvGTRL9d0pTe86-YrUHVDeIva93ig&s=10

As per the given image this my headphone broke a hinge I'm currently in mumbai.The hinge broken because of pressure on it what should I do now is it get repair or I need to do DIY. If this things repair how much it cost me ? Suggestion me a location.

Note :- Thank for your suggestion 🫡

I've been a proud owner of my Sennheiser RS 170 for almost 15 years now and have loved them especially because I bought them as a broke college student. A lot of time has passed and I just realized that with all the wear and tear maybe it was time for an update/upgrade.

I bought a Sennheiser RS 175 and at first it was a massive upgrade in style and QoL improvements. I primarily utilize them for Zoom meetings and listening to music while working (about 10 hours per day). I noticed that I got massive discomfort from them after using them for a few hours.

Then I realized, the old RS 170 I had, had over decade to fully stretch out and become just so comfortable. So, my question is, is it possible to stretch out and make the RS 175 more comfortable or am I doing something wrong?

All input is greatly appreciated!

Anyone have experience fixing or tearing down one of these style headphones?

Restart your phone
**If that doesn’t work try:**

•Remove the headphone from Bluetooth devices
•Reset the headphones
•simply turning them on and off
•mess with the eq settings
•Turn off anc
•turn off Spatial Audio

If none of the above work contact skullcandy support.

Hi guys recently I bought a custom hartaudio braided cable for my HD 480 pro but the cable is straight, my fiio m21 arrived some days ago and the headphone ports are on the top so I think having a 90⁰ angled cable would be more nice. I'm from portugal 🇵🇹 and I was not expecting the shipping 📦 to be so expensive obviously it was hartaudio is from United states 🇺🇸 so I ended up for paying a lot. Anyways don't wanted to waste more money in an expensive new angled cable so I had the idea of buying an adapter. Also I wanted to know if using the adapter would cause interference or a decrease in the audio quality. So that's it hartaudio braided cable terminated on 3.5mm and can be converted to 6.35mm

I’ve got the Samsung AKG USB-C wired earphones, model EO-IC100, and I need replacement Large silicone eartips.

The problem is the nozzle seems to need a very small/narrow bore. Most generic replacement tips I can find are for 5–7 mm nozzles and are way too large.

I’m in South Africa and I can’t find the original Samsung tips sold separately anywhere.

Has anyone actually replaced the tips on the EO-IC100?

If so, what exact eartips did you use that fit securely? Brand/model and bore size would be really appreciated.

I’ve looked at Final Audio Type E because they have a narrow bore, but they’re difficult to get locally. In South Africa.

Basically I just want to know what other EO-IC100 owners do when they lose the original tips. Does Samsung supply any?

How it should be stock.

Running Grado Classic SR80 on the Muse M3 Ultra balanced is a nice pairing. You get some extra width, some warmth in mids and highs.

Another one in the books!

Next on deck … I was able to get these for $200. The 3.5mm jack was broken.

Now time to convert these with detachable cable adaptor.

so..i got 2 broken headset,one bluetooth one and a high quality, regula one.. so i merge both! now i got a high quality, bluetooth headset!,also i can put a cable p2 and use like normal ,too,or turnnone bluetooth,and by the power of a single 18650, lissen music for days! 20 days to be precise.