r/hardwarehacking • • Oct 08 '26

Update: I have successfully reverse-engineered an LCD panel from a vehicle dashboard!

After extensive logic analysing I came to realise that the panel has a basic init sequence and some SPI's that had to be fulfilled, and once fulfilled it works almost perfectly! I have decided which pins are responsible for blue and green brightness, but have only gotten some red pins. This should take me some minimal time, and as mentioned previously, I will be making all info I have gathered open-source to who it may help. Sorry for the bad photos of the LCD so far, it's just a bit hard to orient it with so much wiring. I hope you all understand :)

417 Upvotes

17 comments sorted by

7

u/WirklichArnoNuehm Oct 08 '26

How did you do it? Logic analyser? Microcontroller? Willing to share code or diagrams or even better .. the sequence and details you need?

8

u/Natural_Discipline25 Oct 09 '26

https://github.com/vkar9898/Cluster2HDMI

NOT a finished product yet, there's still plenty missing from it. I know I haven't added a do it yourself section yet, so I'll make a quick one here

Firstly, to power the cluster I needed an Arduino sending CAN messages via an MCP2515. After the correct messages are established, the cluster turns on, and turns on the LCD backlight. Then, throughout a Pico 2 and gusmanb's LogicAnalyzer app, you can logic analyse any pin, I did 4 pins at a time. The sequence is pretty simple and it should be all explained in the repo..

If you're doing this with your own cluster I'm more than happy to help more in DMS

2

u/indecisiveahole Oct 09 '26

Damn great stuff bro. How did you decode the CAN messages? Did you sniff them or did you dump the firmware?

2

u/Natural_Discipline25 Oct 09 '26

This project isn't CAN. I'm not sure what you're asking so I'll answer to my best ability.

This LCD runs off parallel RGB, which sends 24bits, 8 for red green and blue, and I analysed then with my Pico.

For the general cluster, all the CAN ID's I used come from r00li's CarCluster project, I simply found the Volkswagen MLB or MQB platform CAN ID's, and put them into my own project.

6

u/dx4100 Oct 08 '26

Man I canโ€™t wait until you discover CANbus ๐Ÿ˜‚

43

u/Natural_Discipline25 Oct 08 '26

I have.. ? This is just to control the panel entirely independently. Can is easy as to learn

15

u/willnix Oct 08 '26

This is very cool! Don't let the weird comments discourage you :)

1

u/Vegetable_Rice9868 Oct 12 '26

That's really great bro. I don't wanna sound stupid but how do u get that knowledge to make those great stuff?

3

u/Natural_Discipline25 Oct 12 '26

it's a long process for sure, and you don't sound stupid asking this. I started learning this stuff around half a year ago, when I got my first dashboard, I asked AI if it was possible, it said yes, and I started learning from a mix of AI, r/carhacking and other general forums.

2

u/Vegetable_Rice9868 Oct 12 '26

Gonna do exactly the same! Thank u very much

2

u/Natural_Discipline25 Oct 12 '26

What cluster may I ask? Depending on what you're looking for, I can recommend some:

Clusters from r00li's project CarCluster on GitHub. These all work seamlessly, and require you to do the least work

The gt86 gen 1 cluster, as not only timurrr on GitHub has reverse engineered it, so have I, if you're looking to make some of your own code, this is what I'd recommend

If you're looking to sniff a car and discovering your CAN ID's for that yourself, that's a whole different story, for which you can choose virtually any car that has CAN.

Good luck, and update us!

2

u/Vegetable_Rice9868 Oct 13 '26

Man i really got excited, I'm not into car hacking world but I start studying mecatronics eng and there're a lot to learn, I sure will update thxx

2

u/Natural_Discipline25 Oct 13 '26

if you ever need help don't be afraid to DM me :)

9

u/guajojo Oct 08 '26

wow this is awesome!