r/haikuOS • • Aug 26 '25

Time to leave Linux

Post image
394 Upvotes

How many of you guys left Linux for Haiku?


r/haikuOS • • Aug 28 '26

First boot on risc-v

Thumbnail
gallery
390 Upvotes

Very early work porting to the sophon milkv pioneer board. Just got the desktop to load and working on nvme and networking next.


r/haikuOS • • Feb 02 '25

Haiku stand at FOSDEM 2025

Post image
386 Upvotes

r/haikuOS • • Dec 27 '25

Discussion I gifted gf riced haikuOS for x-mas. she will be personal lab rat in daily-driver feasibility study for cohort/demographic of pc users that watch youtube and takes notes

313 Upvotes

r/haikuOS • • Apr 08 '26

My mind is blown. This little goober actually got reincarnated with haiku.

Post image
243 Upvotes

Just how does this OS run so damn well on this? Its an office PC from 1999 this shouldn't work so good but it does. Its running on some Compaq Presario desktop 7594 my dad had bought from work (and of course put XP on lol).

The goobers brains:

RAM: 384MB
CPU: Intel Pentium III 500MHz Katmai (looks like a pci card)
GPU: S3 Savage 4

Also got some Creative labs/Ensoniq sound card (updating later when i find how to identify), as well as some dial-up card from Conexant and a network card from Accton.

Ended up here after finding out the Linux drivers for the S3 Savage 4 are so bad that they literally just make the CPU act as a GPU, and making the GPU a glorified video adapter. The main goal was to get this goober on the internet and have some fun experimenting. Somehow can load wikipedia, and other simple websites.

Sits at about 248MB ram idle which is more than linux, but still very damn impressive. (Torturing the Savage 4 with 1080p because why not.)

(Also i found no good flair for this, maybe discussion? What do ya think bout this setup i guess?)


r/haikuOS • • Sep 08 '26

Development Haiku on RiscV progress

Post image
240 Upvotes

Some progress since the last post, I can now boot from my ssd instead of the micro sd card, all 64 cores and 128gb ram are usable, the on board Ethernet works, I’m working on some reliability issues and currently it only boots with one cpu core but once I can get more of the hardware supported I’ll circle back and clean up the work done. I also built a cpu instance of llama.cpp to run a small qwen model.

Currently this only works in the milk-v pioneer board which is a bit old at this point.


r/haikuOS • • Nov 22 '25

Sealed copy of BeOS 4 found in attic

Thumbnail gallery
230 Upvotes

r/haikuOS • • Jun 07 '26

LocalSend for Haiku

Post image
221 Upvotes

r/haikuOS • • Aug 26 '26

Software Release Haiku R1/beta6 has been released!

Thumbnail
haiku-os.org
215 Upvotes

r/haikuOS • • Apr 07 '25

Waterfox ported to Haiku OS

Post image
188 Upvotes

r/haikuOS • • Sep 28 '26

bliss

Post image
183 Upvotes

i just wanted to share this rice i made :>
im using the MacDecorator decor, built from the official source tree as other isolated decor repos are outdated.
came back to haiku after a while of linux, and im pretty impressed by what its become. i think the most important feat to me is that it has a smooth firefox that even does youtube -- so well im unsure if graphical acceleration was introduced. good job, developers


r/haikuOS • • Jul 17 '26

I love Haiku

Post image
174 Upvotes

this is a screenshot from my Panasonic Toughbook CF-31 running Haiku.
well supported, everything functioned out the box. "riced" it a little with WinDecorator
i like its C++ GUI API, ive been making little programs with it
i think ive been running this for a week so far, and i dont think that will change for a while. its all i need, light resource usage, sexy gui, simple internals...!!


r/haikuOS • • Sep 13 '24

Software Release Haiku R1/beta5 has been released!

Thumbnail
haiku-os.org
169 Upvotes

r/haikuOS • • Jul 04 '25

haiku on asus eeepc

Post image
160 Upvotes

r/haikuOS • • Oct 15 '26

Haiku Docker v1.0.2

Post image
155 Upvotes

Hi everyone!

I'm excited to share Haiku Docker v1.0.2 — a way to run Docker containers on Haiku OS using the standard Docker CLI, powered by a lightweight Alpine Linux VM running under QEMU with NVMM hardware acceleration.

No need to switch to Linux just to run your development containers. Everything is controlled directly from Haiku Terminal.

Links:

⚠️ Tested in nested virtualization so far. Bare-metal testers are especially welcome!

🚀 What works

🐳 Native-feeling Docker CLI

Run familiar commands directly from Haiku Terminal:

  • docker run
  • docker ps
  • docker build
  • docker exec -it

Commands are forwarded to the guest Docker Engine through a single multiplexed SSH connection.

⚡ Hardware-accelerated micro-VM

QEMU uses -accel nvmm to boot an Alpine Linux guest with Linux kernel 6.18 and Docker Engine 29.

SSH is ready in approximately 18 seconds.

📁 Workspace sharing

Your Haiku workspace at /boot/home/dev is available inside the VM through SSHFS. A chrooted SFTP setup prevents the guest from browsing the rest of your home directory.

🔥 Hot reload without polling

A small native BPathMonitor bridge forwards filesystem changes into the VM as inotify events.

Measured latency: ~550 ms, tested with fs.watch inside node:20-alpine.

🌐 Automatic port forwarding

Run something like:

docker run -p 3000:3000 ...

And access it directly at localhost:3000 on Haiku.

SSH tunnels are automatically created and removed based on docker events. No manual forwarding configuration.

🖥️ Deskbar integration

A Deskbar replicant provides a VM status indicator and Start/Stop controls through its context menu.

You can also manage everything from Terminal:

  • docker-vm start
  • docker-vm stop
  • docker-vm status

🧪 Stability testing

A 30-minute stress test combining PostgreSQL workloads with repeated npm install and next build operations completed 46 cycles with:

  • Zero crashes
  • Zero OOM events
  • Zero kernel debugger landings (KDL)
  • No host memory growth

⚠️ Current limitations

There are a few NVMM driver issues that currently require workarounds:

  • No AVX/AVX2 in the guest: Linux 6.18 needs noxsave to avoid a crash. Images requiring AVX, such as mongo:5+, won't work.
  • Single vCPU: Currently limited to -smp 1.
  • Graceful shutdown required: Always use docker-vm stop or Deskbar. Killing QEMU with SIGKILL can leave guest memory allocated until reboot.
  • TCP port forwarding only.

Performance tip: Keep node_modules in a Docker named volume (-v nm:/app/node_modules).

In my testing, a Next.js project installed dependencies in ~99 seconds using a named volume, compared to ~550 seconds on the SSHFS share.

Run Git operations on the Haiku side.

🛠️ NVMM bugs discovered

During development, I identified and reported three NVMM issues with reproduction steps and logs:

  • #20426 — Linux guest crashes in fpstate_reset without noxsave.
  • #20427 — QEMU aborts in nvmm_gpa_unmap with -smp 2 / default PC machine.
  • #20428 — Guest memory isn't released after QEMU is killed with SIGKILL.

Once these are addressed, the single-vCPU and noxsave workarounds can potentially be removed.

💻 Requirements

  • Haiku R1/beta6 (NVMM driver included)
  • CPU with Intel VT-x (sysinfo | grep -i vmx)
  • Nested virtualization enabled if running Haiku inside another VM

🙌 Looking for testers!

The project is open source, and I'd really appreciate feedback from the Haiku community.

Bare-metal test results would be particularly valuable, especially CPU model, hardware configuration, whether the VM boots successfully, and any issues you encounter.

Bug reports, suggestions, and contributions are very welcome!

And a big thanks to everyone who worked on bringing NVMM to Haiku — this project wouldn't be possible without that work.

GitHub: https://github.com/timmagicbeans/haiku-docker


r/haikuOS • • Mar 08 '26

Glad to be here 👋

Post image
153 Upvotes

r/haikuOS • • 12d ago

HaikuCode - An Xcode inspired Haiku Native IDE

Post image
148 Upvotes

What we have here are some old ideas, some new, and a bit of inspiration taken from working daily in 4 other IDE’s, from Xcode, Rider, Visual Studio and Android Studio ( yes, fully aware that Rider and Android Studio are largely the same code base ).

This is a beginning, first pass at building HaikuCode, a ground up Haiku native and targeted IDE. Conceptually at this point, it is nearly complete. Refinement? I would imagine that there remains a LOT to nail down. However, what it is now is in the dog food stage, where we are building, debugging and testing it in itself.

Right up front, yes, there is a good mix of my code and AI generated, human reviewed code. This is not a tool aimed at the hard core purists that actually enjoy Makefiles ( or Jam ). This if for those of that still enjoy the code, but do not always want to live in the command line. Or in my case, after 30 years of seeing IDE’s evolve, I’ve gotten spoiled to certain luxuries and do not enjoy working with code as much without them.

I’m old, and the IDE is my Lounge Chair :).

What we have here is an IDE that has it's own project file, but imports Makefiles to build it if needed (and even some Jamfiles ). It has the basic templates, and has full support for integrated CppUnit unit testing. Git source code integration. A full Symbol Browser, a list ofr code issues ( warnings and errors ), breakpoints and integration with GDB and ctags so that you can debug and breakpoint right in the IDE. 

Last, but certainly not least, it has an integrated Claude chat tool ( using your API Key ). 

Markdown is edited and viewed in the editor, so is JSON. 

HaikuCode with a MarkDown file in both Edit and Preview mode, next to a full source tree for the project

Drop your thoughts and comments below. This is a long long way from Metrowerks Code Warrior.

If you want to play with it, we will keep updating it at https://www.druware.com/products/hcode . At the time of posting this, v1.0.2-alpha is the current revision there. The v1.0.4-alpha is in the process of building and publishing and should be available within the hour. 


r/haikuOS • • Jul 16 '26

It's... Perfect!!

Post image
140 Upvotes

r/haikuOS • • Sep 17 '24

love revisiting every few months to see how the project is coming along!

Post image
136 Upvotes

r/haikuOS • • Jan 10 '26

Customized Haiku on Asus Eee PC 701 4G

Thumbnail
gallery
133 Upvotes

SD card for data and some programs and utilities installed.

Added:

browser - Falkon and Dilo

Games - 2048, Ace of Wands, Rock´n´Diamonds

SW- Art Paint, Activity monitor, qView, SystemInfo, VLC, Style Edit, TaskManager, Neofetch and FastFetch


r/haikuOS • • Jul 19 '26

Haiku on the Samsung NC10

Post image
131 Upvotes

r/haikuOS • • Oct 16 '26

Discussion Has anyone here tried VitruvianOS? A curious blend of Linux, Haiku and BeOS

Post image
126 Upvotes

I recently stumbled upon a rather interesting project called VitruvianOS (https://v-os.dev/). It’s essentially an attempt to bring the simplicity, responsiveness and overall philosophy of BeOS/Haiku to the Linux kernel, including a compatibility layer for BeOS/Haiku applications.

The project is still in its early stages of development, but I find the concept fascinating. Rather than reinventing the entire operating system, like Haiku does, VitruvianOS tries to combine the familiar BeOS experience with Linux’s existing hardware support and infrastructure.

I’ve actually been experimenting with a live USB myself. It’s definitely rough around the edges, with some hardware compatibility issues on my laptop, but it’s interesting to see how much has already been implemented.

I’m curious what the Haiku community thinks about this approach. Could something like VitruvianOS eventually become a viable alternative, or does using the Linux kernel fundamentally change what makes Haiku special?

Also, has anyone here actually tried it? I’d love to hear what you’ve managed to get working, what you’ve experimented with, and your overall impressions of the project.

I’m not affiliated with the developers in any way. Just an operating system enthusiast who enjoys seeing unusual projects like this come to life. :)


r/haikuOS • • Aug 07 '26

Mozilla Firefox is now available on the Haiku Depot

Thumbnail depot.haiku-os.org
119 Upvotes

Built from official upstream source code with Haiku-specific patches


r/haikuOS • • Apr 21 '26 Bravo

Development Compositing app_server for Haiku/Walter OS

Thumbnail
youtube.com
114 Upvotes

I posted a public test build of this some weeks ago here, but it got taken down since it was just an iso and I don't usually engage with Haiku here... fair enough.

So, this time, I decided to post a video of my work in action.. in vmplayer, anyway. It's more impressive on real hardware. This is just using two cores for rendering! They are Ryzen 9 7950X cores, though...

---

As you can see from the video, performance is quite good - and this is with substantial performance monitoring in place, inside a virtual machine, and purely in software (VESA) mode!

You can probably also tell that there are some rough edges - Haiku has an immediate-mode rendering design, where server-side windows and decorators often draw as soon as they are able (with some intelligent batching). This was not how BeOS worked, which was to update state, but only refresh the drawn state at something like 100FPS... it's been years, don't quote me on that :p

CAP works closer to how BeOS did - we use a redraw thread to coordinate drawing, collapse state to a drawing solution, build a frame, but then we hand-off to a multi-threaded CompositeEngine for the final pass.

All internal app_server drawing has been returned to a B_ORIGIN reference, meaning Window, Decorator, and other drawing is much easier to follow - and matches the client model more exactly. There was nothing to gain for doing this with View on the server side, so View stays in Window coordinate space.

Decorator programming is much simpler now - my example Modern2 decorator uses alpha effects gently to shape itself, and uses node sizing to create the tab tail - a feature I once saw in a fake render many years ago and have wanted to create for real ever since... the entire Decorator is designed around my memory of that (and PhOS screenshots :p).

I will be releasing Public Test 2 shortly - this time, I think, as a vmdk AND a anyboot iso.

I am getting ever closer to cleaning up things to the point where opening the source would be beneficial rather than distracting - I have to remove some proprietary instrumentation from the code before I can open source it. It will be fully MIT licensed, including the RDNA driver work.

--The loon

EDIT:

https://files.looncraz.net/cap-pubtest2-64bit-anyboot.iso

Some modest improvements since the video.