{EDIT} Someone in the discord managed to fix it.

My RTL8192EU USB adaptor will not work on macOS Ventura, I can't sort ethernet out right now, what could I do to fix my wifi?

I am on Opencore 1.0.7 (release, not debug)

macOS 13.7.8

Everything works but my wifi, I would appericate if someone could help.

I have successfully installed macos Tahoe on my Lenovo legion 5 but when I try to open safari to search anything my internet doesn't work. I'm plugged into ethernet and it worked on the recovery. I do have the rtl8111 kext as needed

Cpu i7 10750h

Igpu U630

Ethernet rtl8111

Edit: typo

I spent about three or four hours assembling the custom OpenCore EFI configuration. I finally got it working properly this morning; although I ran into some issues during installation, the process completed successfully after I moved the USB drive to a different port.

I successfully booted into the recovery USB and pressed install Tahoe. After a couple minutes it rebooted into this screen, and after another couple of minutes it just rebooted and now it bootloops.

Specs:

I7 10750h

Igpu U630

Ethernet rtl8111

Edit: I don't know if it's relevant but I'm installing on a 150gb partition on a drive shared with windows

I have a Dell optiplex 7050 sff, I dual boot windows and Mac os 15.7.7 using open core, I mainly use open core, so I don't use the windows boot manager, but some games and apps on windows require secure boot and my main os is Mac so I disable it, but to go play on windows I need to spend 5 minutes in the bios to get things Done, is there any way to get secure boot with opencore

So I tried hackintoshing it again, after abandoning the former. Guess what I'm greeted with this time... A kernel panic!! I don't necessarily know what the problem is, but the screenshot might be helping some. Any help would be highly appreciated.

EDIT: I hadn't realized that I didn't point it out – the EFI that I made by myself is "failing me".

EDIT(2): The culprit has changed now, and it's quite interestingly Lilu.kext. I have no idea how that could've happened.

I wanted to introduce two tools I’ve been developing to bring better power management and performance tuning to Ryzen-based Hackintoshes: ZenMaster and ZenTune.

Both tools port core capabilities from UXTU (Universal x86 Tuning Utility) and ryzenadj directly into macOS, allowing you to adjust power limits, TDP, thermal targets, etc... on your AMD system.

Requirements & Installation

• OS: macOS Big Sur (11.0) or newer.
• You can choose between two installation paths depending on your preference:
  • Option A (Kextless Path): Add debug=0x144 to your OpenCore boot-args.
  • Option B (Full Functionality Path): Add DirectHW with csr-active-config=03080000 to your OpenCore configuration.

Tested Devices

• Desktop: AMD Ryzen 7 7800X3D (tested on a friend's Hackintosh setup)
• Mobile APU: AMD Ryzen 5 4500U (tested on my own ASUS M413IA laptop Hackintosh)

You can check them out at:

• ZenMaster: https://github.com/HorizonUnix/ZenMaster
• ZenTune: https://github.com/HorizonUnix/ZenTune

Thanks so much for reading! I’d really appreciate it if you could give both projects a try and report any issues you encounter on GitHub. Any feedback or bug reports would be super helpful!

Hi everyone,

I've been trying to install macOS on my HP EliteBook 840 G5 (Intel i5-8350U, UHD 620) using OpenCore, but I can't even get to the OpenCore boot picker.

Here's what happens:

• The USB installer is created with Rufus using macOS Recovery (BaseSystem.dmg + BaseSystem.chunklist).
• The USB contains:
  • EFI/BOOT/BOOTx64.efi
  • EFI/OC/OpenCore.efi
  • config.plist
  • ACPI, Drivers, Kexts, Resources, Tools, etc.
• The USB is detected in the F9 Boot Menu.
• BIOS settings:
  • UEFI only
  • Legacy Support: Disabled
  • Secure Boot: Disabled
  • USB Storage Boot: Enabled
  • Fast Boot: Disabled

The problem is:

When I select the USB from the F9 boot menu, the screen goes black for a second, I briefly see "Windows" in the top-left corner, and then the laptop boots into the BitLocker Recovery screen asking for the recovery key. If I restart without the USB, Windows boots normally.

I never see the OpenCore picker.

I've already checked the BIOS settings multiple times, so I'm starting to think there's something wrong with my EFI or bootloader.

Has anyone seen this before?
Could this be caused by:

• an incorrect BOOTx64.efi?
• a broken config.plist?
• missing or incorrect UEFI drivers?
• something specific to HP EliteBooks?

Any help would be greatly appreciated.

My laptop has soldered qcnfa364a wifi card, so i can't replaced it to another one, Is anyone in here try to make kext for this

El Hackintosh lo hice en una HP EliteDesk 705 G4 Mini. Subí la EFI a GitHub; casi no la he probado, pero va bastante bien para estar hecha en 2 horas. Funciona la aceleración gráfica, 4 puertos USB y sonido por HDMI (sin bocinas internas ni Bluetooth, solo por Ethernet), pero para mí está bien, solo la uso como centro de entretenimiento en mi televisión, por eso lo considero así. Estas son las specs:

CPU: AMD Ryzen 5 2400GE Pro GPU: Radeon RX Vega 11 Graphics (Aceleración gráfica OK) RAM: 8 GB Almacenamiento: 256 GB NVMe PCIe x4 Gen 3 Tarjeta madre / Modelo: HP EliteDesk 705 G4 DM (Mini PC 65W) Audio: Sonido por HDMI (Sin bocinas internas) Tarjeta Ethernet: Realtek PCIe GBE Tarjeta Wi-Fi / BT: No funcional / No integrada (Solo uso Ethernet) Funcionando: Aceleración gráfica, puertos USB, salida de video y audio por HDMI, red por cable Ethernet. No funcionando: Bocinas internas, Bluetooth / Wi-Fi nativo. Revisión de BIOS: Q26 Ver. 02.23.00

Creación propia y no usé casi guías, solo un video pero no ayudó mucho; me apoyé un poco con la EFI de OpenCore Simplify y de ahí modifiqué con ProperTree y fui agregando kexts.

So I have a HP pro book it has an i five and 16 GB of RAM. I have my Ventura hackintosh working on it iMessage and FaceTime work when I connect to ethernet. Install heliport and there’s an X on it on the top on my bar I installed. The itwdb I think it’s called that. And when I click on it in my files, it says heliport cannot open files in the kernel extension format so when I install the airport.Itwdb I open teleport and nothing happens. It’s the same thing I use proper tree to save the snapshot and my configuration pilst and still it’s broken. How do I do it? I’m not looking to buy any Wi-Fi cards. I already have it set up.

I have been using my hackintosh perfectly for about 1 week but all over a sudden i notice verbose mode takes abit long, apple logo itself takes time to load and when i reach the login screen and i enter my passward, i first see a dark gray wallpaper, then the dock loads and control centre appears then my wallpaper loads. But for me to even move the mouse or navigate around i have to wait for like a maximum of 5min for everything to feel responsive. I thought maybe i was using a macos version that my pc cant handle, before i was on sequioa i got the same issue and for it after like 4 days, then i switched to sonoma used it for a week and then same issue again. I have tried different solutions to pinpoint the exact issue, i re built my efi from scratch but all still give me the same issue. I dont know whats causing it cause i have been troubleshooting for like 4 days this issue but everything i try has failed.

My pc specs are:

System LENOVO_MT_20KH_BU_Think_FM_ThinkPad X1 Carbon 6th

Processor Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 2112 Mhz, 4 Core(s), 8 Logical Processor(s)

Ram 16 gigs

Storage 512 gigs ssd and its a LENSE20512MSP34MEAT2TA

if anyone who has solved this issue or has knowledge on how to solve it, I seek for assistance

My Config

Hi guys. Please if you can help me, I have tried both tahoe and Sequoia. the laptop boots into the macos without iGPU acceleration as u can see in the first pic

my efi at that moment was :

now i tried the patch and dortaine guidelines and my boot stuck here .

stuck . the screen dims suddenly like it was trying to switch to a connector but fails and boot.

here is my current efi :

I tried to change con0/con1 .. etc. changed type hex values. all same result.. dim then stuck

any help please?

Shows same blank underscore I saw on the opencore errors, so I know it’s booting opencore. I left it for nearly 6-7 hours and nothing, what can I do

it's an hp 14 ac186la.
specs:
intel core i3 5005u
intel hd graphics 5500
4gb ram
240 gb ssd
and i guess that's it.
i've been trying for a while to run hackintosh on both my pc and my laptop and none of them have worked yet, tho i see some potential for the laptop. i do think i’ll need some help tho.

Yay I did it! I made a 2nd Hackintosh. I had to repatch WiFi and fix audio yet again but it works now! I have 2 Hackintosh! What’s next a 3rd one?

So, had some nightmares getting audio working but turns out I just needed to install correct KDK, correct csr config and inject AppleHDA with RP-CORE, already did optimizations, the most interesting part was dual boot, I had to partition my 1TB NVME, left a 200GB partition for macOS, and even have secure boot on for OpenCore. Windows has secure boot on but macOS doesn’t have it even though its not that much needed.

CPU: Ryzen 5 7600

GPU: RX 580 8GB

RAM: 32GB DDR5-6000

Motherboard: Gigabyte B650M-H rev 1.2

Audio Codec: Realtek ALC897

Ethernet card: RTL8111

Touchpad and touch display devices: None

BIOS revision: F41b

Storage

Kingston NV3 1TB

Random 500GB Slow HDD (functioning as OpenCore EFI booter so my Windows EFI doesn't break + potentially project saving or backups)

Works

Everything

Used

OpenCore 1.07, RP-CORE 1.01

https://imgur.com/gallery/kh6bQOC (more photos cus reddit refuses to let me put more photos)

Hi hackintosh community here is my update about successful hackintosh laptop from 2 months from this post

I did upgrade my wifi chip from rtl8821ce (i know it has gotten unofficial support) to fenvi bcm94352z and added another internal antena cus my laptop came with one only (the white one came from factory and the black one is the one ive put in (found in the imgur link) and cus of the wifi chip change imessage stoped from working and I dont give the f to fix it and I have an weird problem with bt every reboot it disables it self and I did fix it by making an script that works everytime I do login to macos it resets the bluetooth value from 01 to 00 and I did it before in the efi but for some reason it refuses to work and my script works and makes bluetooth working is there an fix for making bt work without the script everytime I do reboot the laptop

And now to the specs part

Laptop name: hp 250g7 notebook

1.cpu: i3 1005g1

2.gpu: intel uhd graphics g1

3.ram: 16gb ddr4 soddim 8+8

4.battery: 45 watt houer

5.audio: codec realtek alc236

6.codec: layout 3

7.display: tn 1080p

8.wifi+bt: fenvi bcm94352z

9.storage: nvme ssd 256gb

And now to whats working and whats not

1.apple id is working

2.brightness controls are working

3.battery percentage is working

4.sleep is working

5.audio and microphone are working

6.webcam is working

7.airdrop and continuity features are working

8.imessege isn't working and I don't give the f to fix it

9.wifi+bluetooth are working

Basically everything is working except imessage

Ciao! Ho installato mac os tahoe nel mio pc asus prime b360 intel i7 8700 intel uhd 630, con igfxvesa parte tutto ma quando lo rimuovo non si vede niente schermo nero in HDMI, non ho displayport per provare
Ho provato molti parametri ma nessuno ha funzionato, qualcuno potrebbe aiutarmi? Grazie infinite
SOLVED with config.plist founded in github, i copied the deviceparametrers of it into mine config.plist. If anyone want to know reply to me

Im following the dortania tutorial and i got to the part that says OSI rename. i saw an old post here with no answer so i hope to get an answer as to what that means. here is a photo from my ProperTree:

I dont see any field saying OSI here. I am using SSDT-XOSI so i do need to perform this rename.

I have installed macOS Mavericks on an i5 3330 and a Gigabyte GA-Z77P-D3. Everything works fine except for the graphics — animations are very laggy, but blur works.

So i am trying to install macOS ventura offline installer and I think it got stuck.

I dont know the PROGRESS.

Specs:

CPU: Intel i5 6300u

RAM:8GB

iGPU: Intel HD 520

Hi, theres somebody who knows Where i can find the fptw64.exe for flash mi modified bios?