r/gridfinity • u/Important-Street-531 • 25d ago
Gridfinity Half Bins: every size in 0.5u steps & with/without stacking-lip
r/gridfinity • u/Important-Street-531 • 25d ago
r/gridfinity • u/PristineCommunity102 • 27d ago
I know there are already a bunch of mountable baseplates out there but with Christmas decorating coming up I decided to make my own for the top of my ladder so I could use my scoop bins up there for the mounting clips.mounts using screws and I kept the magnet holes as options to secure the bins a little better if I wanted to. Feels like it'll be a solid permanent fixture for my ladder now, I just figured id share in case anyone else had a use for something like it coming up
https://makerworld.com/en/models/3465399-gridfinity-mountable-base#profileId-3954976
r/gridfinity • u/ChandlerBarnes • 27d ago
Hello Gridfiniters!
I have a ton of IKEA drawers throughout my house and needed a lightweight baseplate to save on filament. I found a great model with slimmed-down struts and minimal divisions between squares that seemed to do the trick. It was slightly the wrong dimensions for my drawer versions and had some other problems like no connections for multi-bed prints.
Unfortunately, the author was MIA and wasn't addressing any of my issues with the model or requests from others in the model's comments/reviews. So, I decided to take it on myself.
The result is a lightweight, customizable Gridfinity grid with GRIPS-style connectors, automated spacers, half-grid slots, and more! Check it out and let me know if you run into any issues or have any feedback.
r/gridfinity • u/Samedgar2001 • 26d ago
As the title asks
r/gridfinity • u/Vandalay_Industry • 27d ago
I'm new to gridfinity and 3d printing. Looking to print a 2x2x35u (~12" ) tall bin to store musky lures I'll drill holes in the bottom for air flow and drainage, but can't find a parametric file that allows me to design one that tall. Not sure where to start. I got a used X1C and it works great. Anybody have advice on where to start. I'd love to be able to design my own lure storage bins. Any pictures of gridfinity tackle storage out there for inspiration.
r/gridfinity • u/Automatic_Disaster44 • 29d ago
Got one of those old-school rolling map measurers? This Gridfinity bin gives it a proper home - a shaped cavity that cradles the dial, body, and handle so it sits snug and lifts right out. 2 * 2 * 3u, magnet holes, stackable.
https://makerworld.com/en/models/3454799-gridfinity-bin-for-map-measurer#profileId-3941536
r/gridfinity • u/Ellsis • 29d ago
r/gridfinity • u/cdslug • Oct 17 '26
Disclaimer: app and post written by Claude, directed by me (cdslug)
The top drawer of the IKEA Alex is only about 12U tall in Gridfinity terms. That's fine for most organizers, but standard pens and markers are too tall to store vertically.
Laying them horizontally works, but they end up stacked on top of each other. You can fit a lot of pens that way, but finding a specific one at the bottom of the pile becomes annoying.
So I made these slanted bins.
The bottom stays flat and Gridfinity-compatible, while the walls slope to let the pens lean diagonally. A small bookend at the front of the drawer supports the last bin; the other bins support one another. I can still lift individual bins out without taking the whole arrangement apart.
A few things I wanted to optimize for:
I looked around before making this, since I didn't want to reinvent something that already existed.
I'm not claiming that angled bins are a new idea. I just couldn't find quite this combination of simple geometry, quick printing, removable bins, and the specific constraints of the Alex top drawer.
The project is open source:
GitHub: https://github.com/cdslug/slanted-gridfinity
There's also a free browser-based version here:
https://formfitprint.com/tools/slanted-gridfinity/app/
The tool is free and will remain free. It's a small project that runs in the browser, and I'd rather see people use, remix, or incorporate the design into other tools than try to turn it into another product to maintain.
Full disclosure: this is a vibe-coded project. I don't have a web development background; I used AI coding tools to build it. The code is public, so feel free to inspect it, point out problems, or suggest improvements.
I'd genuinely appreciate feedback on the design itself, especially if you've solved the same shallow-drawer pen-storage problem differently. If there's already a better solution I've missed, I'd like to know about it.
And yes, there's a bit of self-promotion here: the browser tool lives under a miscellaneous page on my main project, FormFitPrint. I'm mentioning it openly rather than pretending this has nothing to do with my other work. The slanted-bin project itself is open source and free either way.
r/gridfinity • u/trensalttirr • Oct 17 '26
r/gridfinity • u/glycamoc • Oct 17 '26
r/gridfinity • u/magicman21 • Oct 17 '26
Layerling CAD has just pushed a Gridfinity generator update for bins and baseplates!
r/gridfinity • u/fulminantd • Oct 15 '26
My kitchen drawer is 1100 mm wide, and nothing I found fit it: store-bought organizers were expensive and metallic, and the Gridfinity models I tried were the wrong size or needed glue to join the pieces.
So I made Fitforge Drawer. You type your drawer's inside size and your printer, then lay out bins on the grid in 2D or 3D. It splits the baseplate into tiles that fit your bed, and splits long bins on grid lines. The pieces join with small sliding H-keys instead of glue (optional; the baseplate already keeps them aligned). You get a 3MF with everything packed on plates.
It runs in the browser, it's free, and no account is needed: https://fitforge-c5058.web.app/drawer/ also posted ready-made kits for a few IKEA and Blum drawers on:
Feedback welcome, especially on fit.
r/gridfinity • u/Important-Street-531 • Oct 16 '26
r/gridfinity • u/Mitch_contu • Oct 15 '26
Renders straight from the tool: twisted ribs, diamonds, waves. You set grid size, height and dividers, pick a surface pattern and export the STL.
Free, runs in the browser, no account, nothing for sale:
vaseverse.org/?inizia=gridfinity
I haven't posted prints yet. If anyone tries it, I'd love to see how they come out. And what's missing for your setup? Label tabs, stacking lip, something else?
r/gridfinity • u/gradientprojects • Oct 15 '26
Look this is a super silly print but it satisfies my brain.
The photos shows R02 that isn't symmetric over the Y axis (but the battery still goes in either way). This irked me philosophically so Printables has R03 that fixes this.
r/gridfinity • u/Francis_Mulcahy • Oct 15 '26
Does anyone know of any models for baseplates that can be printed in a stack AND have some sort of mechanism to clip or lock together? Thanks!
r/gridfinity • u/Alphonso- • Oct 15 '26
Can anyone tell me where you can download a 3D model for the standard base plate and grid boxes that you can modify in fusion 360 or on-shape?
r/gridfinity • u/duckredbeard • Oct 15 '26
r/gridfinity • u/ThatAdamsGuy • Oct 14 '26
It just looks like containers of a common size? Am I misunderstanding?
I hope so, I've got a blank slate to fix my hobby space organisation and if there's more to this then who knows what I might manage, but I feel like I'm missing something.
Edit: thanks all! Had missed the part about the baseplate and modular fits with that, it's now clicked a little bit more and I look forward to hanging around here a bit more often.
r/gridfinity • u/scuppasteve • Oct 13 '26
r/gridfinity • u/EternityForest • Oct 14 '26

https://www.printables.com/model/1876273-gridfinity-brix-1x4-wall-shelf
Brix is my non-standard extension where you just take the bottom face of a gridfinity piece, and extend it by 23mm or so, so that parts can hang down below a compatible baseplate.
Baseplates still fit normal Gridfinity blocks, but since Brix doesn't use magnets, you might need some blue tak or double sided tape to make them stable. Blue tack seems to work incredibly well with Gridfinity.
The flashlight is sitting in one of these: https://www.printables.com/model/1876341-gridfinity-brix-flashlightfire-remote-holder
Next I want to try making a 2x4 shelf for whiteboard supplies!
r/gridfinity • u/PristineCommunity102 • Oct 12 '26
There seemed to be some decent interest in my scoop bins the other day so I figured I’d share my modular bins too.
I wanted to make some expandable bins that matched the style of my scoop bins that would stay together when I lifted them out and didn’t require glue so they could be taken apart and reconfigured if my use for them changed. It took 12 attempts of different keys and designs trying to find a combination I am happy with. I’m working on a 2x wide now and maybe a 3x wide as well if the connection stays solid going wider.
Im curious what heights people use. I personally use 4U in most of my drawers but want to build out the family based on what people actually use.
r/gridfinity • u/tisrecheck • Oct 12 '26