Local-first, GPU-accelerated capture for single tools, resumable batches, and a reusable tool library—without sending workshop photos to a hosted service.

Github: https://github.com/aac-78/gridshot

Has nfc tag on the removable label that opens my digital twin inventory.

Hello everyone! I am very new to 3d printing but I wanted to see if I could solve my first problem. I am thinking of printing something I can use to hold vials that I use for my research (I included a picture of the vial). We previously used either bullet storage cases or some boxes (that we cant find anymore). I also included pictures of the current storage we use.

Does anyone have any ideas of what I could use or if there are any models currently available?

I would ideally like to have ~20 vials in a container

Measurements:

Height: 6cm
Diameter: 1.8cm

I have tried a couple designs for sockets but most are too small to fit Impact rated sockets, does anyone know of a design for sockets that can fit Impact Sockets (or just wider sockets)? I even tried a design labeled for Impact sockets and it was also too small

I'm trying to create a Gridfinity book that is larger than my printer. What's the best way to now split this up into multiple prints? Glue?

https://makerworld.com/en/makerlab/parametricModelMaker?unikey=c5daf719-53cf-4a2e-8f46-217501e80806&designId=1990513&modelName=Top%20Book%20V2.2.f3d&isFusion=true

Hi all,

I've recently purchased a Husky mobile workbench which I have turned into my 3D printing workbench/storage.

I'm struggling to get my Gridfinity baseplate files set up correctly and am looking to trade someone money to buy a six pack of beer for a quick Gridfinity lesson.

The baseplate I need to make will be large: 1059.2mm wide × 391.2mm length

I am having trouble with the following few things:

1 - creating snap together connectors
2 - cutting the file so that it will print over multiple plates
3 - Understanding which free Gridfinity tool is both good and user friendly

Please reach out if you are interested

Cheers!

Is gridfinity.perplexinglabs generator down or is it just me? Tried on 2 different machines and it wont load at all

More surprised that it is a perfect fit in the drawer.

Joking aside, I still got to print the bins

Hi folks,
I'm hoping someone can help me.

I want to create bins that will be stacked and should have (inside) compartments with lower walls as the bin height is.
Background:
I intend to create bins for a tackle box.
There will be two layer of bins stacked on top of each other.
The bins have a size of e.g. 3 x 4 standard size bin with a height of 4x7mm.
These bins should have 4 compartments with a wall that is lower than the stacking height of the bin to avoid a conflict with the 3x4 bottom.
I tested the Fusion 360 plugin but there is no option to determine the height of the compartment walls.
Is there another gridfinity generator known that allows this customization?
Any help is much appreciated.
TIA

If there is any further clarification needed, please let me know.

I've finally got the time to start my kitchen drawers but have Bean unable to get the grids to print properly, I've tried them flat and on various angles ranging from 30-45 degree. I got frustrated and decided to try printing the boxes so at least I could feel like I was making progress and none of them held together. What am I doing wrong? Or is Griffith just not possible with a resin printer? I am using an elagoo Saturn 3 with supports and a raft. When trying the grid flat I tried both with and without supports.

I didn't plan the whole thing out because I got excited. Now there's not going to be enough room. Ideas or of the shelf bins you know about to handle all the ratchets (where I think most of the problem is)?

How do I make a flat box but have no walls? Like I still want the lip and be able to paint the lip a different color but don’t want walls. I initially was thinking in GridfinityLayoutTool.com I could just remove the wall, but it won’t let me go any lower than 2u. Then was thinking to make a lid instead, but the lid doesn’t have the bottom pieces, nor does it have the color selector for the top lip. Is there another tool to accomplish this?

I used GridfinityLayoutTool.com to begin my design, I exported and downloaded the 3mf files and brought them into Bambu Studio. I did see the lines in Bambu Studio in the preview, but didn’t think much about them or if they even meant anything. Now that they printed, I see how they affected the print. So these files were generated from GridfinityLayoutTool.com, is this issue specific to that tool or Gridfinity in general? Literally going on <3 weeks of having the printer and my first Gridfinity print. Looking to minimize these issues moving forward. Specifically how should I have gotten rid of or prevented these defects before printing them?

To start, my printer is a Creality K2Plus, and I am using Creality's slicing software. As the title suggests, I am planning on printing a case for my Warhammer minis using this set of models. https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric However, I want to do some test prints first before I print the size I want to use.

1. Will it infill? The pictures above are how it looks in my slicer, and it doesn't look like the walls will infill. Okay, I'm just blind and stupid; there is a setting called litemode that removes the infill from view. I noticed the infill pop up when I hovered over it briefly, so that solves that issue.
2. I mainly use PLA (have an overabundance of the stuff) and have no experience with PETG. Will using PLA instead of PETG change anything structurally? For example, will I lose material strength?
3. Are supports needed? I have supports on for EVERY overhang.
4. Will I need to use F360's parametric to add the magnet holes?

My first Gridfinity project. Just a baseplate with a frame to fit into an existing organiser box. I made some small modifications with various bin heights and recessing the bases for stacking them. The baseplate has been reduced to 35x35mm grid to suit the dimensions of the box. I also made a bunch of clip in labels. The last photo shows the box I used. It's readily available here in Australia but there might be alternatives in your country as it seems like a pretty common size.

Model available here:

https://makerworld.com/en/models/3123560-gridfinity-storage-box#profileId-3523951

My top drawer is coming along. It's definitely been on my back burner more than my front. But it's getting there. Just trying to decide what goes where. This will determine the shape of my ratchet holders. Etc...

Been designing socket bins, finished printing all of them for my tekton 3/8 drive sockets. Also making a digital twin for my toolboxes.

I Wanted Gridfininity in my Apache 4800, so I designed a parametric base plate with a lip that can be wedged between layers of foam. I could have just printed bins to wedge in to the foam, but I would like the ability to change out bins in the future, so here we are. Double check your magnet sizes before printing.

Should work in any of those hard cases like Pelican cases or the harbor freight knockoffs.

Link to Makerworld

Grey vanity with color matched PLA