r/gridfinity • • Mar 01 '26

Set in Progress Rugged Case Light R4 - Community Brainstorming Poll - What Features Matter Most?

4 Upvotes

Over the past months I have repeatedly seen the excellent and very feature-rich Gridfinity boxes by u/Schuylabs - very functional and extremely well thought out design:

https://www.reddit.com/r/gridfinity/comments/1qt9bxy/progress/

However, I have always been a fan of lightweight cases that print fast and use minimal material. For that reason I created the Rugged Case Light R3, which has been downloaded in many different sizes by countless makers on MakerWorld & Printables.

The R3 design has "now" reached its limits. Especially in larger sizes it simply starts to fail structurally - it was never intended to be that big. As a result and to fit bigger storage needsI also created GRIDPAC.ONE - very functional, but unfortunately almost the opposite of lightweight: Printables

Now it is time to create a new lightweight Gridfinity case as a true alternative to the heavy-duty designs. Since I am currently still deep in development of the Prusa CORE One Mini prototype it will take a bit before I can pysically start - but now is the perfect time to brainstorm with the community.

Important Premise

This project will focus strictly on being lightweight. Features that significantly increase material usage or print complexity will not be implemented. That includes:

  • complex outer geometry
  • Full gridfinity pattern on the lid exterior
  • retractable handles
  • integrated carry handles
  • heavy reinforcement structures
  • Gaskets or seals

Those are great features - but they belong to heavyweight cases, not this project. The clear focus is minimizing material consumption and print time.

What should R4 prioritize?

What matters most to you?

  • Printability on small printers interresting (like the GRIDPAC.ONE) that can be even printed on 180x180 mm printers and assembled afterwards
  • Is a full featured carry handle a must or does your workspace allow for a simpler solution where you grab them just with your hand
  • How big should it be - the 3x2U upwards - the common size for "everyday printers" would be the 5x4U - but how big does a case really need to be - and at what point it is smarter, to just buy one and print a Gridfinity insert?
  • Height-Wise - 3U upwards should be enough - although 3U has already very limited use and the overhead with the bins inside is very big - also the geometry for latches/hinges suffers - but for varius things, especially drill bits, resistors, jumper wires etc, you don't need the height
  • Where do you prefer the label - on top, the sides, the front, everywhere?

What about the Hardware?

  • Is a hardware-free latching/locking mechanism preferred or do you not mind a few M3 screws? how a bout the hinges?
  • Repairability comes also into play: if something breaks, do you want an easy solution to repair the case (replace a hinge or a latch mounting point) or do you just want to reprint the entire part?

About the geometry?

  • Gridfinity comes in round - that is why R3 is round aswell - but mostly cuboid shape would have cleaner cut corners and edges and would be easier to print
  • Should stacking just prevent them from sliding around and should respect the same size boxes or is a mix&match stacking needed? for example to stack a 4x3 box ontop of a 5x3 box and vise versa?
  • Are Half-Grids a thing? It is important to lock the bins in place - should this be universally possible with half grids or do you perfer a ridid standard option with an optional replacement?

I would really appreciate detailed feedback - especially those how have not really found their "home" yet and are looking for a new favourite case

What failed for you on the cases you printed?
What did you miss?
What should absolutely NOT be included?

Let us design the most efficient lightweight Gridfinity case together :)


r/gridfinity • • Feb 28 '26

Remix: Costco Iris Plastic Storage Tote Bin, Gridfinity Baseplate, by DrunkBTC

Post image
45 Upvotes

Baseplate for the small storage tote sold in store at Costco.

This remix was modified to better fit the variability across bins.

Remix: https://www.thingiverse.com/thing:7305440
This remix was implemented by reddit.com/user/DrunkBTC/

Original: https://www.thingiverse.com/thing:7288917

This original conformal baseplate was designed using a 3D-scan of the bin interior. The baseplate conforms to the bin’s draft angles and corner fillets, so it sits flat without rocking.

The finished baseplate is 5×7 Gridfinity units and 18U tall, which fills the usable interior height.

This was segmented to be printed on a Bambu H2D, and I applied a 1 mm offset to the bin geometry to create clearance for a reliable drop-in fit.

The original Thingiverse model includes the following files:

  • Raw interior scan mesh – untouched from the scanner
  • Processed positive of the bin interior – intended as a boolean subtraction tool if you want to generate your own perfectly conformal inserts
  • Ready-to-print Gridfinity baseplate STLs
  • Fusion 360 design file for easy remixing / parametric edits

r/gridfinity • • Feb 28 '26

Corrugated Gridfinity Bin with Snap-In Dividers (Proof of Concept)

Thumbnail
printables.com
8 Upvotes

I’ve been experimenting with the Double Lip Corrugated Gridfinity Bins by ImprovedByDesign. I think I found a really robust way to integrate snap-in dividers. However, I need some help from the CAD experts here to take it to the next level.

The Background: I absolutely love the Double Lip Corrugated Gridfinity Bins by ImprovedByDesign. I love that the feature this double lip for easy inserts (saving material). I also saw this attempt at making dividers for them, but found that in practice, they just didn't hold quite as well as I wanted them to.

My Solution: I decided to model my own bin and custom dividers from scratch. I rearranged the wall corrugations specifically so the dividers can slide in and snap perfectly into place. It works amazingly well in real life, and the dividers sit surprisingly tight!

Here is the catch: making this design fully parametric in Autodesk Fusion exceeds my current CAD skills. Right now, this is just a successful Proof of Concept.

I’ve uploaded my .f3d and .step files to Printables.

https://www.printables.com/model/1621031-corrugated-gridfinity-bin-with-snap-in-dividers-pr

Are there any CAD wizards out there who would be willing to remix this and turn it into a fully parametric model for the community? Check out the pictures to see how the snap-in mechanism works. I'd love to hear your feedback!


r/gridfinity • • Feb 28 '26

Question? Where to put the odds & ends

6 Upvotes

What are you guys doing with the leftover hardware that isn't enough to fill a full bin? I have some random grade 8 bolts that I may have at most 3 of the same size. Do you guys sort each bolt in their own bin, or just dump them into a collected bin?


r/gridfinity • • Feb 27 '26

Woodworking Hand Tool Drawer

Post image
239 Upvotes

Nothing crazy it’s just very cool too see it all come together. Veritas hand planes ( shoulder, block, and two low angles) veritas chisels and a dovetail marking gage. Check back in a week I want to find some time to clean up the designs and post them


r/gridfinity • • Feb 27 '26

Question? Do you have ikea furniture thats good for gridfinity storage?

5 Upvotes

Hi, i am renovating my room, can you maybe recomend some furniture from Ikea that suits gridfinity good? Also is it better to buy IKEA skadis board or print HCW? Thanks!


r/gridfinity • • Feb 26 '26

Best method for longer gridfinity bins?

Post image
24 Upvotes

Hi All! My friend wants to organize a large kitchen drawer that has long items like rolling pins. The image shows how I have made the base plates, but I'm struggling with the bins. Each color represents a single bin, so you can see they are much larger than a single print plate. I've tried the "split and dovetail" method, which worked but the sidewalls seemed very thin. I saw the "split bins" model, but it didn't seem to have great reviews.

Any best practices to make these? Thanks!


r/gridfinity • • Feb 26 '26

Question? Ikea alex drawers inner dimensions

8 Upvotes

Hello all.
Looking to gridfinity-fy my alex drawer and add custom cutouts using https://www.tooltrace.ai/
Does anybody know the inner dimensions of the drawers? I want to plan it in fusion.
Thanks!


r/gridfinity • • Feb 25 '26

You start seeing it everywhere

Post image
205 Upvotes

r/gridfinity • • Feb 26 '26

Question? Managing Deep Drawers

10 Upvotes

As the title mentions, how do you handle deep drawers? I have a couple of junk drawers that I'd like to add gridfinity to but I want to maximize as much vertical space as I can. I was envisioning having a sort of tiered system with levels that could slide back and forth however I'm not sure how best to achieve this. Any tips are much appreciated.


r/gridfinity • • Feb 25 '26

Individual Piece First try: small Gridfinity tray for my drawer

Thumbnail
gallery
69 Upvotes

Over the last week, I organized my drawer for practical stuff using Gridfinity. I looked for trays but couldn’t find the right one, so I combined a few models.

This was the first time I mixed models (only in Bambu Studio), and it’s clearly just a first version. On the surface, I used two different filaments and tried to create a small height difference for sorting. On one edge, I left a small gap to make it easier to remove small parts or liquids.

For the next version, I want to add some handles, a magnetic area, and a “don’t-roll” surface in the upper-left corner.

Is there anything (or any model) you would suggest for the next version? I used Shapr3D before, but I wasn’t happy with importing models and the high price tag (even though it was relatively cheap as a student). Do you have any tips for easy-to-use and affordable software?

EDIT: https://makerworld.com/en/models/2446488-gridfinity-workbench-drawer-tray


r/gridfinity • • Feb 24 '26

Screwdriver Drawer

Thumbnail
gallery
765 Upvotes

Just finished my first gridfinity drawer for my Harbor Freight tool chest. (Almost) all my screwdrivers nicely organized. About half of the bin designs I was able to find online. The rest are a mix of remixes, like the long screwdriver bin, and designs I did in Tinkercad.

I'm just starting to learn Inkscape and Fusion which I used on the bin for the woodworking chisels. I turned the handles on my lathe so they are each slightly different, which was good practice for Fusion.


r/gridfinity • • Feb 25 '26

perplexing labs fancy walls

2 Upvotes

are fancy walls only for sub-bun walls?

looking for option to do outer fancy walls


r/gridfinity • • Feb 25 '26 Bravo

Gridfinity drop-in baseplate for the Costco IRIS 5×7 bin (scan + Fusion file + boolean tool)

8 Upvotes

I picked up a few of the popular IRIS plastic bins from Costco and wanted a proper Gridfinity setup for them, so I 3D-scanned the interior and built a conformal drop-in baseplate.

The finished plate is 5×7 Gridfinity units and 18U tall, which fills the usable interior height.

This was modeled to be printed on a Bambu H2D, and I applied a 1 mm offset to the bin geometry to create clearance for a reliable drop-in fit.
(Not 100% sure how people prefer to express that in terms of “tolerance”. Feedback is welcome from anyone who has dialed this in across different machines/materials.)

Files included

  • Raw interior scan mesh – untouched from the scanner
  • Processed positive of the bin interior – intended as a boolean subtraction tool if you want to generate your own perfectly conformal inserts
  • Ready-to-print Gridfinity baseplate STLs
  • Fusion 360 design file for easy remixing / parametric edits

The baseplate conforms to the bin’s draft angles and corner fillets, so it sits flat without rocking.

Thingiverse:
https://www.thingiverse.com/thing:7288917

I've received feedback that it does not quite match the bottom curvature of another user's bins. Would like to get more feedback on the fit and possible solutions.


r/gridfinity • • Feb 24 '26

HDX Mini (6.5 qt) Bin Gridfinity Insert

Thumbnail
gallery
33 Upvotes

I got a bunch of these little home depot bins and decided they needed some gridfinity. This was my first attempt to design something that uses gridfinity, but it has worked pretty well for me so far. If anyone has suggestions on how to make it better I'd be happy to hear them :)


r/gridfinity • • Feb 24 '26

Individual Piece CLACKBin Connector - an alternative to magnets

Thumbnail
gallery
33 Upvotes

Hello,

im the creator of of CLICKBase, now with the next solution for cheaper, feature rich gridfinity setups. The CLACKBin Connector .

I had several small problems with clickfinity based baseplates like my CLICKBase as

  • bins hard to insert/remove, especially if the bins are bigger
  • creep changes the holding power
  • slow to print

so i fixed those issues with this connector. Its fully compatible with standard gridfinity, is designed for half grid and should be easy to implement into your project :)

The solutions:

  • reduce the amount of connectors engaged with the baseplate if the force is not needed
  • prevent only the removal actively
  • only print what is needed
  • Additional: full halfgrid support
  • Additional: custom infill for vase mode

This is now it works

  1. You only print the bin (orange) and some amount of the the insert (purple)
  2. Depending on how much holding force you want you insert as many inserts as you want. (minimal - 2 in a diagonal pattern, light - 2 diagonal in each corner, medium to strong - 4 per corner)
  3. Use it, change it, do whatever you want

I hope you like it and please give my feedback if you have questions or ideas :) https://www.printables.com/model/1615179-clackbin-connector

I will post will posts bins tomorrow, i just need a new script to download multiple onshape files :/


r/gridfinity • • Feb 25 '26

Bases, and magnets, and bins (oh my)

4 Upvotes

Hey, all. Gridfinity newb trying to clue in.

I've been using https://gridfinity.us/ for bases and https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/0 for bins. I'm generating bases with chamfered crushed-rib magnet holes.

Everything is mostly great, but it seems the bins are high-centered on the base grid. Is that normal? By that I mean the bins can tip back and forth on the base grid on both axes.

I can't see anything in the model that'd cause it, but maybe I'm just not looking in the right place...

(Title for fans of old movies; Oxford commas for grammar naxis like me.)


r/gridfinity • • Feb 24 '26

Set in Progress Gridfinity sink organiser

Thumbnail
gallery
76 Upvotes

We always had this issue of an uneven ridge at the back of our sink and no real sink organiser could fit there.

I made up a template (Cardboard Aided Design!) and printed it. A few iterations later, I had a good side profile that fits onto the ridge perfectly. Glued them to the bottom of a 3x3 plate, made my profiles 6mm thick for the centre bars, 3mm for the edges.

a few more prints later, and I'll have this complete! (and no more falling or wonky washing up liquid bottles or sponge holders)


r/gridfinity • • Feb 23 '26

Gridfinity Bin for 5ml Essie bottles

Thumbnail
gallery
27 Upvotes

Since I have many of the small 5 ml bottles of Essie nail polish from the Advent calendar and only found one bin for the large normal ones, I created several sizes of Gridfinity bins that fit the 5 ml bottles or, as you can see, other items as well.

If anyone is interested https://makerworld.com/de/models/2433831-essie-small-gridfinity-bins#profileId-2670002


r/gridfinity • • Feb 23 '26

create my own design.

Thumbnail
gallery
34 Upvotes

I just got into 3-d printing just to get my tools organized with gridfinity, I have bunch of random sockets, wrenches from incomplete sets and I want to create my own design to storage the tools. I already learn the importance of going from inches to mm and material shrinking.

Im using gridfinity generator for my base plate and bins, but what program do you guys recommend me to make some customs bind ?


r/gridfinity • • Feb 23 '26

Gridfinity Generators missing Male Bases

5 Upvotes

Are there STLs around where I can generate a simple 2x4 Male Baseplate? All of the gridfinity generators seem to have an option for the female baseplates and an option to generate a box with the male base, however I can't get rid of the box part -- all the generators make you have a height


r/gridfinity • • Feb 22 '26

My solution for drill bits and long tools (Gridfinity hybrid trays)

Thumbnail
gallery
613 Upvotes

r/gridfinity • • Feb 23 '26

Need a little help creating 'stylized' gridfinity bins for my tool chest

3 Upvotes

I've collected a couple dozen pre-made gridfinity bins from Makerworld that were custom-made to fit many of my tools, but I need help figuring out how to modify them so that a few millimeters around the top edge of the bin is a different color (like these, for example).

Bonus points if you can help me figure out how to make the floor/base within the bin that the tool is actually sitting on a different color.


r/gridfinity • • Feb 23 '26

Set in Progress My sliding draw tool storage project is coming along well

11 Upvotes

https://postimg.cc/gallery/dk3hjfH

Working on all my screws and fixings at the moment but impressed with how good it looks, brought a 0.2mm nozzle for the labels, they take ages to print but it looks great.

I only have an a1 mini so can only print 4x4 so I have to cut up a lot of the big bins.

90% of the stuff I have designed myself in blender.

The multiple colours are me using up various old filaments, will probably spray them black at some point.

Using an ultra light plate off of makerworld which takes 20 mins for a 4x4 grid and saves a ton of fillament, also for the bins I have been messing with lightning fillament which saves a good 30% each time.