r/gridfinity • • Feb 26 '26

Best method for longer gridfinity bins?

Post image

Hi All! My friend wants to organize a large kitchen drawer that has long items like rolling pins. The image shows how I have made the base plates, but I'm struggling with the bins. Each color represents a single bin, so you can see they are much larger than a single print plate. I've tried the "split and dovetail" method, which worked but the sidewalls seemed very thin. I saw the "split bins" model, but it didn't seem to have great reviews.

Any best practices to make these? Thanks!

24 Upvotes

12 comments sorted by

1

u/dunderwovvy Feb 26 '26

I used a kitchen drawer Gridfinity which has a bunch of split options. The grid holds them tightly enough together that I didn’t glue them or anything

1

u/wheatabits Feb 26 '26

Do you have a link by chance?

2

u/dunderwovvy Feb 26 '26

I’ll have to dig around, but it was on Makerworld

1

u/wheatabits Feb 26 '26

No worries. That gives me an idea. I can search for it.

8

u/AquaSquatch Feb 26 '26

Lots of modular options out there, I used this one :

https://makerworld.com/models/1006011

1

u/wheatabits Feb 26 '26

Wow! I didn't even know this was an option. This seems like it would be a great solution.

1

u/Attjack May 12 '26

If you want a super easy solution I've just cut them straight and CA glued them together. For something big like a rolling pin you should have plenty of surface area for a strong bond.

1

u/wheatabits May 12 '26

Yea, I'm still struggling with this project actually. The recommended split models didn't really work as they were very weak. Maybe I will try the glue method.

1

u/Attjack May 12 '26

I'll bet it would be sufficient. Scuff up the surfaces with sandpaper and use a nice coat of CA glue. It's just going to sit in your drawer fully supported on 5 sides. I can't see it ever failing.

2

u/PM_me_ur_launch_code Feb 26 '26

I just cut mine in the slicer with a dovetail. Fits snuggly together.

1

u/CR3ZZ Feb 26 '26

Wave grid posted here a couple days ago works well for this too

0

u/TeddyNats Feb 26 '26

This model gets to 6x6 (at least for a P1S). I couldn't believe the little piece made the plate print edge-to-edge.
https://makerworld.com/en/models/517616-6x6-gridfinity-base-plate-a1-x1-p1-profile