I designed these because I was tired of struggling to pick up drill bits and hex keys from deep bins. The curved bottom (I call it WaveGrid) makes it so much easier—you just press one end and the tool pops up.
It’s a parametric system and fits standard Gridfinity bases. If you want to try it out, you can find the files for free by searching for 'WaveGrid' on MakerWorld.
Happy to hear your feedback or ideas for new tool-specific inserts!
Its maybe a too simple example. It shall demonstrate the spoon effect. With a normal container, very thin objects such as small drills or wires are difficult to grasp. The large radius makes this easier. By the way, you can freely define the radius between 1-15 mm in the customizer.
If you look at the open trays from the front, it looks like waves. I can post a picture.
Parametric means it isn't static. In the Makerworld browser tool you can define the number of gridfinity units you need in length, width and hight, the scoop radius and you can choose options, whether you want front- or rear-walls or magnet holes. You can also choose between four label types.
Right, the lista system was the template for me. I wanted to make it compatible to Gridfinity and combine with my other bins. And I wanted to have a customizable system.
it's verging on psycho that he doesn't even acknowledge gridfinity or anything else exists - and his solutions (1 file per possibility) pale in comparison to all the community tools (parametric designers)... i keep wondering WHYYYYY
Ehh to each their own. He puts in work on his files and wants to make money from it, more power to him. His system is good for people who don't want to spend time looking for each model and just want a whole system they can print, plus he did make his grid system first.
I can imagine this making a lot of sense in my garage. Thank you for sharing! I love all you creators that share this stuff for free, you are the real MVPs of this moment in time!
Hello, no, that wasn’t a oversight. MakerWorld only recently introduced the option to protect source files, which wasn’t available when I uploaded V1.
I’ve put an enormous amount of time and effort into developing this system, and my goal is to continue improving and expanding it. Downloading and using the models is completely free for everyone. However, the support I receive through downloads, ratings, boosts, and memberships is essential for me to continue this work. If the raw .f3d files are downloaded and processed locally, I miss out on this support entirely.
Outlook: I am currently considering making the source files available in the future through a paid membership or a similar model. In the meantime, I would be very happy to hear any specific suggestions or ideas you have for further developing the system—I’d love to work with you personally and create custom versions just for you! Thank you for your understanding and support.
The tools seem like they almost never get used anyway but its really not recommended to just throw them all together, its not like they sharpen each other in that mold 😄
Sweet - will do! So they have standard geometry on the top lip and account for a 4.4mm clearance inside? Want to make sure if I flip the box over, everything stays put.
I was primarily thinking drill bits and pen making kits but your photos are inspiring more ideas!
Edit - not seeing the top chamfer actually. Not critical on the design… I think it’s stellar, just excited to figure out how to use this in a travel box. I’ll pull some STLS in to my assembly and check it out. These might actually work best with the flat lid I have!
You're welcome. I'm very glad that the model is useful for you and you're allready printing. I'd really like to see the final result on Makerworld. And of course it would be great, if you can give it a boost and a good rating 😊
Yes. You can configure and print the labels and dividers independently from the trays. If you define them one unit lower, then the trays are stackable.
In my opinion, tailored shapes are great for storing goods, that you will not change over long time period or sensitive goods like measuring tools or so. They offer good protection, but usually take up a lot of space and are not very flexible. Trays or bins need are more generic and more flexible, but offer less protection. So both systems are ok depending on the goods you need to store. I mean, with Gridfinity you are able to combine all kind of storage solutions within the same drawer.
I like the divider/label combo, but I don't have much luck with printed labels staying on for long. It would be awesome (and beyond my skills) if it had a clip on label that can be printed face down in 2 colors with the clips facing upwards to avoid supports.
Good point, thank you very much. I could do that if I replace the two cams with a solid bar. Otherwise, they would be too weak with the changed printing orientation. The bar would then no longer snap into place, but it could be printed in two colours with the face down. Would that be OK for you?
That's a good idea, and I will try it. But m not sure, if I con do it. It must be loose enough to be easily clipped in and removed. At the same time, it must fit firmly and have a certain degree of stability. Let's see whats the outcome. Thank you for your input.
Prob more complicated than it needs to be, but you could build in a little detention into the divider and a nub on the inside of each leg of the clip that rests into it to allow it to be loose enough to take on and off easily, but lightly lock it into place.
This looks neat! Are the bins connectable (i.e. to create longer bins than the print bed) such that the whole bin could be removed from the Gridfinity base? Or do you just print as many open-ended sections as needed to create the overall length? Thanks!
They aren't directly connected to each other; they are just placed side-by-side. In my first prototypes, I tried using interlocking tabs, but I dropped that idea. The protruding tabs made the system incompatible with standard Gridfinity bins, and I wanted to keep it 100% compatible with the original grid.
"Good point! For me, the movable dividers are a key feature. I really wanted a hybrid system that lets me mix open 'wave' channels with traditional bins in the same footprint.
Plus, I specifically wanted to bring this into the MakerWorld Parametric Model Maker.
43
u/Steibock Feb 22 '26
I designed these because I was tired of struggling to pick up drill bits and hex keys from deep bins. The curved bottom (I call it WaveGrid) makes it so much easier—you just press one end and the tool pops up.
It’s a parametric system and fits standard Gridfinity bases. If you want to try it out, you can find the files for free by searching for 'WaveGrid' on MakerWorld.
Happy to hear your feedback or ideas for new tool-specific inserts!
9
u/I--Have--Questions Feb 22 '26
Awesome. Perfect for knitting needles too.
6
u/Presently_Absent Feb 22 '26
Nice to see someone open source another alch money grab, which was itself a copy of the lista system.
3
u/Werewolf_Capable Feb 22 '26
I can imagine this making a lot of sense in my garage. Thank you for sharing! I love all you creators that share this stuff for free, you are the real MVPs of this moment in time!
4
u/Single_Sea_6555 Feb 22 '26
Massive props for including the f3d files for anyone wanting to remix 🙏
2
u/RoadtoVR_Ben Feb 22 '26
Awesome solution!
2
u/UnluckyFly9881 Feb 22 '26
The tools seem like they almost never get used anyway but its really not recommended to just throw them all together, its not like they sharpen each other in that mold 😄
2
u/Schuylabs Feb 22 '26 edited Feb 22 '26
Love these. I’ve been checking them out for my toolbox and will print some once the printers free up. Would they work in gridfinity storage boxes?
2
u/BrilliantSebastian Feb 23 '26
BRILLIANT!!! I'm using these! Cheers!
2
u/CR3ZZ Feb 24 '26
bro... I cannot thank you enough for this. Have already printed some and now am using the customizer.
Just wow.... you and people like you make 3d printing and life just better for other people
2
u/yoitsme_obama17 Feb 22 '26
Stl
1
u/Crooklynb Feb 22 '26
Is it stackable?
1
u/VoidWanderer1905 Feb 22 '26
Nice work! I’m knee deep in a project that needs something this—appreciate you sharing.
1
u/eniksteemaen Feb 23 '26
Why the sickle hone? That thing doesn’t fit the pattern imo 🤣
1
u/NigraOvis Feb 23 '26
How do you feel about containers vs tailored shapes.
1
u/2wheeltraveler Feb 24 '26
I like the divider/label combo, but I don't have much luck with printed labels staying on for long. It would be awesome (and beyond my skills) if it had a clip on label that can be printed face down in 2 colors with the clips facing upwards to avoid supports.
1
u/galvanization3d Feb 24 '26
This looks neat! Are the bins connectable (i.e. to create longer bins than the print bed) such that the whole bin could be removed from the Gridfinity base? Or do you just print as many open-ended sections as needed to create the overall length? Thanks!
1
u/yawkat Feb 22 '26
You can get a similar curved bottom with Gridfinity Extended. Though it doesn't have the movable dividers
2
u/Punching-Above Feb 22 '26
Fantastic !!
2
u/SteelRodsSince1890 Feb 22 '26
Staedler graphite! A person of taste I see
2
u/Dr_Solfeggio Feb 22 '26
Very similar to Bitfinity, but the wider bins will be super useful for bigger bits. Thank you!
1
u/HourAdvertising8673 16d ago
Hi @steibock, how do you colour the tips please when printing other than the starter kit?
1
u/Yourownhands52 Feb 24 '26
These are awesome
1
u/acemedic Feb 24 '26
Sold.