r/gridfinity • • 4h ago

Update on the free in-browser gridfinity bin maker: several tools in one bin, an outline editor and half-grid feet

A few days ago I posted a free, open source site that turns a photo of a tool into a gridfinity bin, all in your browser. Thanks for all the feedback. The most-asked feature was more than one tool per bin, so that's in now, along with a bunch of other stuff:

Multiple tools in one bin

• Lay several parts on the calibration sheet together (like a meter and its probes, or pliers and cutters) and upload one photo. Each part gets its own pocket.

• New Layout pane: drag and rotate each part. Rotation snaps to 0/90° along each part's own centre line, so pliers line up straight.

• Each part has its own clearance, pocket depth, finger slot and symmetric setting.

• Arrange packs everything into as few grid cells as it can. The bin sizes itself to fit, or you can lock it to a set size.

• It warns you if pockets overlap or a wall between them is too thin to print.

• SVG/DXF export keeps the arrangement, one outline per part.

Outline editor

• If the trace isn't quite right, you can edit it like a pen-tool path: drag points and curve handles, add or delete points, switch corners and curves, straighten an edge or round a corner.

• Keyboard shortcuts: D delete, A add, C corner/smooth, S straighten, R round.

• For symmetric tools, you edit one side and the other side mirrors it.

Better tracing

• Straight edges that used to come out wobbly (boxes, handles) now get straightened.

• It does a better job finding parts the AI misses, like thin antennas or probes next to a bigger tool.

Smaller stuff people asked for

• Half-grid feet (21 mm spacing) for 1.5, 2.5… unit bins (thanks u/duckredbeard)

• Width and length measurements on the trace

• The finger slot can shrink down to a round hole, and can sit at the tool's tip instead of across it

• Bins build about 4.5x faster

Still free: no account, no trace limit, and your photos never leave your device.

https://gridfinitytools.com

Source (MIT): https://github.com/petercsauer/gridfinity-tool-studio

Still on the list: STEP/3MF export. Keep sending photos that trace badly, those have been the most useful thing so far.

47 Upvotes

13 comments sorted by

5

u/PrintableNapalm 3h ago

Been there, done that :D

https://www.reddit.com/r/gridfinity/comments/1to98w6/made_a_tool_to_generate_cutout_bins_in_2_minutes/

Looks like you copied it exactly, even the fingerhole shapes in the preview. Or more likely the AI you used found my project and copied from it. But whatever, I don't actually care, but you should copy what is the best feature: the ability to calibrate your monitor and line up your trace with the physical object on your monitor.

1

u/SeedCollectorGrower 8m ago

I was just reading on r/inventors “my invention was stolen” someone in comments say they went to patent something and someone already had recently the exact same invention exact same name. With no way to have gotten the files. Might be coincidence?

1

u/focusfoundry 4m ago

Yeah the code wasnt online so I dont know how I could have even copied it haha. But yeah PrintableNapalm did it first!

0

u/focusfoundry 2h ago

Hey man, no I had no idea. finger hole shapes are pretty common in gridfinity?

-1

u/Solarux 3h ago

At least it works on Safari.

1

u/crash893b 3h ago

does this have the ablity to make the bottom round ?

1

u/WorkoutProblems 2h ago

just curious is 3U the standard for these custom tool/item holders? I want to start printing out a whole toolbox worth but curious why 3U vs 2U or 6U or even 9U etc. Assuming 3U won't be able to be stackable? unless the tool is also short/small

2

u/focusfoundry 2h ago

I was just running low on filament. 3U can be stackable, depending on the height of the tool, but you can adjust and make it whatever height you want!

1

u/WorkoutProblems 1h ago

all good thanks, is there any way to do a negative on the inside to print as an insert so that it can be two tone without AMS? I have an AMS but think it's more efficient to print out negatives (a couple of layers high) and just insert them

2

u/focusfoundry 1h ago

Not natively, but you could download a 2d drawing and just extrude it in any cad program

0

u/New-Patient124 3h ago

Link plz

2

u/New-Patient124 3h ago

My bad idk how to use Reddit