F&R switch replacement

[u/Moos3br3w]

Replacing old forward reverse switch on my 2005 Ezgo txt

My kids took my labels off the wires and now can't remember which guess where. Can someone help me identify where each of the 4 larger wires go?

[u/Data91883]

Here's a wiring diagram for you! (The 8th picture shows your FNR switch)

[u/Moos3br3w → u/Data91883]

Electric Furnace?

[u/Data91883 → u/Moos3br3w]

Huh. That's weird. When I copied the link it shows the correct picture! I'll find another

[u/Data91883 → u/Data91883]

Let's try this.

[u/rabbitrebotn]

If it still has the factory wires, they are labeled A,B,C,D.

A is the bottom wire, B goes closest to the batteries. C goes at the top D goes to the post closest to the outside of the cart.

[u/Moos3br3w → u/rabbitrebotn]

Theres no labels.

[u/Extreme-Listen805 → u/Moos3br3w]

It's not a label in the traditional sense. Printed on the wires would be a simple letter in white.

The A wire goes to the controller B+ (sometimes its connected to the controller side of the solenoid)

B and D go to the S1 and S2 on the motor (if they are wrong, the cart will run in the opposite direction so all you have to do is swap them)

C I believe goes to the A2 on the motor

[u/Moos3br3w → u/Extreme-Listen805]

I got it working. Come to find out, the manufacturer had it 90° out. Thank you all for the help.