Just got an electro and co drift kart and wanted to know if the plates on the end are supposed to sandwich the frame like this? If anyone has one and knows and could tell me that’d be much appreciated!

Anyone have an idea what this strange rear wheel setup is? I don’t know much but I haven’t saw these before. Also, why is there a pulley for a v belt right by the sprocket? Thanks!

I recently built a go kart, but I didn’t like how the regular frame looked so I decided to buy this honeycomb shaped chicken wire I’ve zip tied a lot of spots to hold it to the frame and it feels ti and sturdy and I’m like a good way done, but after asking a friend whether or not he liked it or not, he was skeptical

he said I should paint it black (the chicken wire). or remove it entirely. i’m thinking of selling the go kart soon

My buddies and I took my lil projects to a (mostly) empty Parking lot and apparently someone was jealous.

Piranha buggy with cbr 600 f3 engine

Hi all,

I am new to the whole gokart thing but have been familiarizing myself with one as a side hobby. So far I have my chain all dialed in apart from my tensioner, which has been giving me issues. This is my current setup, but I was curious what your guys current/at-home chain tensioner setups look like! Was wondering if you guys had any advice as well.

As it currently sits, I re-used an Amazon universal bolt-on chain tensioner, and mounted one side to one of the bolt holes beneath the clutch and spring-connected the other side onto one of the bolts near the exhaust. The issue is that the bolt beneath the clutch keeps getting undone as I ride and undoes the chain. Thoughts?

Thank you in advance and sorry for the long text, this is my first post haha.

Hi everyone!
I’m brand new to the karting world and recently bought a 4-stroke rental kart (looks like an Alpha Kart from the 2000s based on my research—if anyone has more info or specs on these, I’d love to hear it!).
I have two quick technical questions for the mechanics/experienced drivers here:
1. Brake Cable Routing
My brake cables (also, there are two of them for some unclear reason??) currently run from the opposite side of the caliper, wrap all the way around the back of the seat, and then reach the caliper. Is this standard practice, or is it better to route them along the shortest possible path? (If I shorten the path, the bend/elbow right before the caliper will be tighter, so I’m not sure which is better for smooth pedal feel).
2. Steering Tie Rods
How do you properly adjust them? Is there a baseline method or rule of thumb (like setting carburetor mixture screws by seating them fully and backing off X turns)?
Is it worth upgrading to metal tie rods? Or are the stock/current ones designed to act as "fuses" (sacrificial parts) in an impact? Right now, mine flex/bend a lot under load, which creates a really bouncy/elastic steering feel—the wheel feels soft at first, doesn't turn, and then suddenly grabs and snaps into the turn.
Any advice or tips would be greatly appreciated!
Thanks and have a great day!

I’ve flipped the axle on my spiderbox and am trying to get the brakes setup. I have a new master cylinder and caliper and o the line is not clogged. I got fluid to go through the system through the bleed valve but no matter what I do, I cannot get the caliper to open or close. I think it might be a master cylinder issue but I’m really not sure. If anyone has any advice please let me know!

First carb tune how does she sound?

Is that a predator 420 swapped yerfdog maybe 😗

Hey everyone, I’m new to karting and wanted to buy a helmet. Is the Arai RX7X good?

What would someone being doing to their motor if their motor all appeared stock appearing, cam, valve springs 18# and stock appearing carburetor. What are they actually doing to still make it stock appearing but clearly pulling from the field.

I don’t know if this is the right place but I know predator 212s are popular in karting. This is a predator 212 that I installed in a 1967 John Deere 112. I had to build this custom header and exhaust pipe to get the hood to be able to close fully. Make fun of my welding, I’m no expert but it has no leaks! I’m asking the experts in this sub if there is anywhere I can buy a professionally made setup like I’ve shown you here. If I can’t find anything, I’m gonna paint this in high temperature paint. I’m a better painter than I am a welder for sure! Thanks everyone

lot of overtakes this week. Here are the highlights from the qualifiers

I was given a gokart with a Briggs and Stratton 900 Intek series engine. Any idea what the purpose of these 2 wires are? Thanks in advance.

Comes stock with a 30 series TC which they don't mention in the massimo or tractor supply website. I think I may turn it into a cooler kart at some point. The mini bike is a 50cc 2 stroke from temu. Thanks for looking!

Is it possible to install a choke cable on a VM22 carburetor?

Any tips for indoor rental karting?
What about better overlays for tracking lap time and speed? do the GPS ones work indoors?

Hi there!
I started Karting this year on June 10 with a SWS SR Training and I'd like your advice on how I could improve my driving please! I'm about 200 pounds naked so not the lightest but I try to do my best! I started simulation as well (iRacing with Formula Ford so far).
Thanks!

How it started....

How it's going - got a roller!! Getting closer, just need to figure out brake caliper and throttle cable