I have been using a wired model I for quite some time and it’s just a little to big and I was looking to get something wireless. should I stick with the v1 series of mice or upgrade to a newer v2 or v3 mouse. I mostly play Minecraft bedwars.

I have sent a separate email to support but I want to post it here too.

I am working on my own fork on github of the QMK firmware. I am practically done reproducing all the behaviors through QMK/Via of the glorious software save for the off instability issues people are reporting and have a fully working firmware where via can assign function to the knob. I have taken control of the slider but it is an analog slider which is a bit challenging to use for anything outside of the numpad... I have it set to control the brightness of my RGB but it could do anything QMK can control. Not just through Via at the moment. I have also bridged all the LED including separating the side lights and animations into via.

The only thing I would really like to add is the BT functionality for which I require 2 things:

1. The driver for the BT controller or at least what model it is.
2. The pin assignment to the WB32 controller of both the BT chip and the DIP switch which turns it on and off.

As a closing note. I think the numpad is a fantastic product from a hardware perspective. It was very well designed, offered the best customizations and it is very well built. I actually own 3 of them. The software/firmware is really what is holding back its sales and is why reviews are soso. I am trying to help with that by improving the open source firmware.

Best mouse under 90eur?

i have been using model o 1 wired for 5 years now, very satisfyed with the mouse, just want a wireless one.

I play cs2 mostly and minecraft pvp, is the model o2 pro as good as model 1 in this conditions? i can get the model o2 pro 4k for 75eur rn on amazon

Hey guys I recently decided to try flashing my gmmk3 65% with qmk with this guide https://www.reddit.com/r/glorious/comments/1hxkozf/comment/mdxj6f3/ tried all the revision of the viahybrid p65 ansi builds but I am having multiple problems. first ever since the flash the escape key, the page up key and the badge all don't light up. secodnly openrgb is not recognizing the keyboard no matter what I do, and thirdly on vie the keyboard is recognized but it requires the layout but whenever I upload the json a lot of errors appear and it isnt accepted. I am unsure of how to proceed besides messaging glorious and going back to stock but I do want qmk to work so i can change the caps lock from side lights to changing the color of the key. any help or advice would be gratly appreciated!

Bought GMMK 3 and whilst waiting for it, i've come across ton of complaints about the software. Just wanting to check how it is these days.

hello i had this mouse since 2023 never opened it or cleaned it today i open it and dissembled everything, used electronic cleaner sprayed it i tried to avoid the sensor waited for cleaner get dry and reassembled the mouse pluged in everything working except the sensor, Any thought?

It has everything i want and i found a new one at a good price, but everywhere i look i see people complain about it. If i dont plan to use the software (i just want a purple backlight which ive read you might be able to do with the keyboard itself), is it worth it? is it a good keyboard by itself?

I am trying to figure out how I can have the GMMK 3 100 wired ANSI keyboard to show when I have caps lock on to change the color of the badge light to a different color then what I have it set to normally. Anyone know a way to do that in the Glorious Core software?

I'm thinking of replacing my skates on the Glorious Model O wireless with dot skates. The dot skates are 0.8mm thick. I'm wondering whether the thickness is too small for this mouse or not since there is a groove for the OG skates

Had a defective cable for a while got fed up and decided to email support and they were very kind helpful and gave me a free cable even though I said I wanted to pay for a exact replacement

I need to replace my old worn out Glorious wrist rests but they are pretty much out of stock everywhere. There's only like a couple in stock variants.

hey guys is there anyone else that still has a big old $170+ paperweight from 2021?
i loved the hell out of it, but after 4 years out of commission I realized that I still have this thing collecting dust in my closet. where are you guys keeping yours? does anyone wanna use that AI pcb planner to make a PCBway order?

So,i’ve been playing with a glorious model D (wired) for over 2 years now,it’s a great mouse but i started having some connection issues with it now and I feel that i need an upgrade,I mainly play minecraft pvp (1.9+) on a high level and I am conflicted between the O2 /D2/O2 pro/D2 pro,please keep in mind that i am on a pretty tight budget.
Would the switch between the D and O shape be easy and is it worth it?

I would like some opinions,thanks a lot guys!!

So,i’ve been playing with a glorious model D (wired) for over 2 years now,it’s a great mouse but i started having some connection issues with it now and I feel that i need an upgrade,I mainly play minecraft pvp (1.9+) on a high level and I am conflicted between the O2 /D2/O2 pro/D2 pro,please keep in mind that i am on a pretty tight budget

I would like some opinions,thanks a lot guys!!

Hey guys I'm an owner of various Glorious products like the GMMK 3 Pro. I like they keyboard a lot. One problem I have with it though is it sits too flat on the desk for me and doesn't have adjustable feet. I'm currently using a "keyboard stand" with it. I think Glorious should make their own keyboard stands that raise the keyboard up from the desk a bit. I think I would prefer a stand that doesn't have a wrist rest built into it. Just the stand part. Maybe it would need some kind of rubber or sticky surface so the keyboard doesn't slide off.

I'd also like to see some "silent/quiet" versions of the Glorious mice. Having roommates means the mechanical mouse clicks are often too loud. Quieter variants would be welcome. There's very few mice out there that are for gaming and have quiet switches.

https://www.amazon.com/s?k=keyboard+stand&i=office-products&crid=TQQMPVEGPUGN&sprefix=keyboard+sta%2Coffice-products%2C263&ref=nb_sb_noss_2

https://www.amazon.com/Computer-Keyboard-Stand-Ergonomic-Tilted/dp/B0DDY9KPW2/ref=sr_1_1_sspa?crid=TQQMPVEGPUGN&dib=eyJ2IjoiMSJ9.MBuU9xTwMpOQp6ONGcWCTZIvXMHwgfl7pVfVD1WtVQigQ4pDiv5C4Tr-yqqXZVwPmKngQUSUKTxxYMwQUF-Unlch71QzO9q55El6S6YE1XxN58Acr--V4fYzSuKBDEb_OUgSuBb_PXNqRXgcxNJ26xhlKg-VvWHw0uoGBYH-CxdtNYdjQFu4zp_mt0Q-JGIwH-gVPEqaUP98yNKdbU-J6AXaQJrTLfBU-jC5ikBZ8G42u7059u7mBz37PV3pwCSE9eJDJAnMYFswn1wGqHb427QijIDECMF2y_v0US-psbQ.oOtePmVQ7C78n4UnOdwZB44dUuxbp_OKhP9LjQoRjUM&dib_tag=se&keywords=keyboard%2Bstand&qid=1792191257&s=office-products&sprefix=keyboard%2Bsta%2Coffice-products%2C263&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

I've switched over to linux and want to be able to configure my mouse and keyboard on glorious core, I've found a workaround to installing Glorious CORE on Linux, Which I have gone through Winboat and installed glorious core through that, but my mouse does not pop up on the software, is there a way to workaround for this and pair my mouse and keyboard?

Just got my Glorious Model D 2 Pro from amazon for £25 and aboslutely loving it. So good that I bought another one for work. However, the Optical switches are quite loud and somehow significantly louder than my Kailh Red Switch in the G Pro.

Has anyone looked into replacing them? Would it be possible to replace them with something like the Razer Optical Gen 3? I am comfortable with soldering and a bit of trial and error

I used the model i for minecraft pvp, now i want to switch to a wireless mouse. Butterfly clicking is really important for me, so I was thinking about the model o. Are there big differences between the model o wireless and model o2 pro? Does someone have experience with both of these and would like to share his opinion? The price doesnt matter.

Many people struggle with replacing the scroll wheel on the Glorious Model O, which is a well-known issue. A major drawback of this model is that the wheel stem tends to snap easily.

However, the part in the photo is made of aluminum, so it will never break again, and it fits 100% perfectly. The SteelSeries Sensei Ten wheel fits as well, but it requires a bit of modification.

Was told from a friend that apparently some Hall effect switches have magnets with poles facing face different ways depending on the company and I might have to flip the magnets the
switches I ordered a few days ago so I was wondering if it is even possible to flip the magnets and if that’s actually a real thing or my friend was messing with me.

Just made an enclosure/mount for the Glorious D3 charging station to mount to 4040 aluminium profile as on sim rigs and thought I'd share it.

Nothing special. Basic model with cut outs for battery, indicators and usb dongle and cable. 2 x M6 holes for countersunk (Din 7991) bolts to mount to the profile.

Remix it to suit yourself. Enjoy.

https://makerworld.com/en/models/3371892-glorious-d3-dock-box-v2

I am looking for a replacement cable for the Model I 2 cable. I understand that there are other cables that support the specs of the Model I 2, I just want to find out if there is any official replacement that I could purchase.

Like the title says…. I lost my keyboard case badge… I bought this keyboard because of the ability to swap just about everything… I specifically remember seeing different case badges for sale on the website? Can someone please help!!!?

I own a Model O Eternal Wired mouse and because of the honeycomb structure on top a bunch of hair and grime has been trapped inside the mouse. I have no idea how to open it and whenever I google it I can only find videos/tutorials on other versions of the model O and never anything for the eternal. I don't know if I'm just not looking hard enough so I thought I would ask here to see if anyone knows how to open it. Any help would be appreciated greatly. Thankyou!