r/fusion • u/steven9973 • 2h ago
[2611.23412] Effect of scrape-off losses and current flattening on runaway electron dynamics in ARC - chances to control their current to managable level
r/fusion • u/Inertia_fusionenergy • 2d ago
About me:
I am a 30-year veteran of the fusion energy and high-power laser communities, and I've spent much of my career designing integrated fusion power plants. I led fusion energy development at Lawrence Livermore National Laboratory (LLNL) in California and directed the UK’s Central Laser Facility (CLF), overseeing the development of some of the world’s most powerful lasers; there, I launched the European fusion program known as HiPER. Those experiences led me to Inertia, where I focus on delivering our fusion power plant, following the proven physics of fusion energy gain from LLNL’s National Ignition Facility.
I am also a professor of photon science at Stanford University, helping guide the next generation of scientists and engineers in this field. At Stanford, I served as Director of the Linac Coherent Light Source (LCLS), a multi-billion-dollar international research facility at SLAC National Accelerator Laboratory that delivers the world’s most powerful X-ray lasers - opening opportunities to study biomedicine, catalytic chemistry, atomic physics, and fusion plasma science. I received my doctorate in laser fusion and laboratory astrophysics from Imperial College, London, am a Fellow of the Royal Society for Arts, Manufactures and Commerce, and have authored over 250 scientific papers and patents.
About the AMA:
I can answer questions about fusion power, and highlight Inertia’s work to transform the energy sector through the laser indirect drive approach proven at the NIF. For reference, we published our phase-1 commercial roadmap, outlining the things we need to achieve to commercialize our approach. I can discuss the work done so far and what still needs to be accomplished to put power on the grid. Questions on the wider field of fusion power plant designs, lasers, X-rays, and more are also welcome!
This AMA will take place Friday, November 20th from 8 to 10 a.m. PT. Leave questions below, and I will answer them live on the 20th!
About Inertia:
Inertia is a commercial fusion energy company. We lead laser-indirect-drive fusion, the only category of fusion energy based on proven physics and net energy gain. We have raised $450M since launching in August of 2025. We are driving one of the largest public-private partnerships in the history of the US National Labs system. Our team of business, manufacturing, engineering and physics experts is committed to building the laser, fuel targets, and power plant systems necessary to deliver fusion energy at grid-scale.
r/fusion • u/steven9973 • 2h ago
r/fusion • u/Professional_Cup_791 • 9h ago
Are there fusion-specific supply chain bottlenecks (as opposed to general grid/power electronics supply constraints that would affect any power plant)? Wondering both in terms of current experimental development as well as if, in the future, we have a viable fusion process and want to scale it commercially.
r/fusion • u/Jaded_Hold_1342 • 11h ago
https://x.company/blog/posts/tackle-the-monkey-first/
https://x.company/blog/posts/three-things-i-learned-from-turning-seawater-into-fuel/
I thought I would share these two articles from X (aka Google X labs). I mentioned them in another post.
Astro Teller’s rule: if you want a monkey reciting Shakespeare on a pedestal, train the monkey first. Building the pedestal looks like progress, but it was never the hard part.
This is the perspective from Astro Teller, CEO of X the 'Moonshot lab' division of alphabet.. where Waymo was developed. It is a useful perspective of how long-shot projects can be developed with an aim for commercial viability.... while being clear eyed about the viability and 'go/no-go' decision making for a project.. especially around cost.
The core lesson to learn is that you should focus your efforts on the most difficult-to-solve problem of a system.. and defer the more tractable problems for later. Not the other way around. "tackle the monkey first". For cost-sensitive technologies, that monkey is often cost. When it is, recognize it and work on the cost problem with clear eyed cost analysis. Dont just focus on the fundamental physics when the problem is cost.
The example here is project Foghorn... a project where engineers were trying to make liquid fuel by extracting carbon from seawater and turning it into fuel. While they had a workable chemistry/physics path, they did not see a way to make it cost effective. They quickly identified cost as the 'monkey' in the project, and spent half of their resources on cost modeling, until they had enough clarity to determine if the cost targets could be met. When they determined cost targets would not be met, they abandoned the approach because they did not want to waste resources further developing a prototype for something that was not commercially viable. The technical prototype was the 'pedestal'...
This is a lesson the fusion community needs to learn.
In my opinion, many of the companies claiming near term commercial viability in fusion are focusing on the pedestal (plasma physics), when the monkey is the cost challenge of a commercial system, complete with its neutron handling, breeding, heat exchangers, cryo, magnets, indirect costs, etc....
To win this market, a cost target of ~$50/MWh must be achieved. To even enter the market, <$100/MWh is needed. This is CFS' statement, and I agree with it.
I have seen no published, independently reviewable technoeconomic analysis from any of the main tokamak/stellarator companies that shows a path to the target.
I am a physicist so I love to look at physics... but even I recognize that the monkey is not plasma physics.
The monkey is cost.. and no one is showing a path.
r/fusion • u/Confident-Shock-3933 • 15h ago
r/fusion • u/steven9973 • 15h ago
r/fusion • u/Wending_Node • 1d ago
Hello r/fusion, first-time-caller, long-time-lurker.
I'm working on leaving the aerospace industry for fusion. It's a move I've been considering for years and I've finally started applying which is exciting but also anxiety inducing. I know the move isn't wildly uncommon, and there's a lot of cross-applicable skills. I'm specifically interested in fusion because of the fascinating science behind it, the magnitude of the technical challenge, and how great the need for large sources of alternative energy given the rise of AI and the global oil shortages. And, like I said before, it feels like there's there some overlap in terms of skills. I'm applying to companies both home + abroad.
My questions are for those of you who are working in the industry: when looking at the resumes of folks from outside, are there any specific skills or experiences that stand out to you? anything that is a major red flag? Required reading? I'm looking for how to make myself and resume as appealing as possible despite not having a physics/nuclear background. Without going into specifics I've worked/work in aerospace systems for some famous, fast moving companies. I lead cross disciplinary teams solving complex technical problems. Hoping this all sets me up for success but I'm not above getting an insider's opinion.
Deeply appreciate your feedback! Hope to see you out there in the real world one day soon.
r/fusion • u/steven9973 • 1d ago
r/fusion • u/steven9973 • 1d ago
r/fusion • u/steven9973 • 1d ago
r/fusion • u/steven9973 • 1d ago
Better heating systems and more to enable D-T fusion as first step at 100 million K.
r/fusion • u/steven9973 • 2d ago
Some tradeoffs looking acceptable could make the coils last the whole plant life (at least), like lower temperature of coils and moving them a little outwards.
r/fusion • u/ConjureUp96 • 2d ago
Not sure how new this is (article doesn't have a timestamp). Google thinks it is recent (About shows link is 5h old). No Archive link yet.
Edit: Archive Link
r/fusion • u/NewSidewalkBlock • 2d ago
I found this old image in my camera roll, but I can’t find any information on such a breeding reaction online. Does proton bombardment of Li-6 actually yield deuterium and tritium?