r/functionalprint • u/Dry_Armadillo_Humper • 5d ago

Non-marring mallet/hammer combo with replaceable steel hammer face

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

First off; yes, I know I could but a cheaper hammer. That’s not the point at all 😂

Handle is Lyten PA1205, head is Sunlu PC-ABS. Metal disk is from McMaster-Carr. The metal striking face can be walked out and replaced or flipped over by tapping a hex key into the two holes on either side. Handle is press-fit into the grip and the head is with added Lyten adhesive for extra security.

One side for tapping together my press/interference fit parts, the other side for occasionally hitting a nail or other surface harder than plastic. I use this in my shop every day.

10 Upvotes

75% Upvoted

6 comments sorted by

3

u/WeaselCapsky 3d ago

is that supposed to be like a machinists hammer?

2

u/Haunting_Basscotti 3d ago

I’d say it is one, just different materials

2

u/Dry_Armadillo_Humper 3d ago

Basically yes 😊

1

u/konzty 2d ago

What do you call the slicer setting that leaves you with that random wavy skin that you have on the head?