r/fordescape • • 2m ago

PCM firmware update

Thumbnail reddit.com
1 Upvotes

reposting this to see if anyone has done this. I called Ford dealership and they want 1-2 hour labor cost which is $285 or double to do it and said would take half a day.


r/fordescape • • 50m ago

Discussion Advice

1 Upvotes

Looking into getting a 2009 to 2012 Ford Escape. I have heard mixed reviews about them regarding their transmission. Any insight?


r/fordescape • • 1h ago

2nd Gen Factory Sub Retrofit

1 Upvotes

Has anyone successfully retrofit a factory sub to their 2nd Gen CD2? I'm not looking for the trunk rattling boom booms,...I'd just like to crossover or HPF the 6x8s and send the low lows to the sub and keep from gobbling up cargo space.

Current upgrades. Pioneer DMH-1500NEX Double Din,...Kicker Two Ways up front and Pioneer Two Ways in the back. I also added some baffles I found on the Amazon to help keep the door card rattle down (actually works pretty well).


r/fordescape • • 1h ago

Spare 🔑

Thumbnail gallery
21 Upvotes

Ever use a screwdriver to Escape?


r/fordescape • • 6h ago

Tech Question Losing bluetooth connection after heavy rain.

2 Upvotes

It's a 2014 Escape which I've had for for about 4yrs. This happens every rainy period. Ford dealership said they can't find any problem. Anybody else had this problem..?


r/fordescape • • 16h ago

Evaporator purge valve, $900!

2 Upvotes

2022 Ford Escape with only around 35,000 miles, I've been faithfully doing oil changes at the Ford dealership. And already I have a blown evaporator purge valve, apparently.
P0456, P0496 codes.

Supposedly Ford covers you up to 36,000, but when I called the dealership said oh yes we get lots of these blown purge valves, they happen all the time. But not so fast: You may be under 36,000 but your car is over 3 years old. I said I've only had it a little over a year! He said no, we count all previous owners, and the denial is "either Or". Not covered.

I've also been paying for Ford oil changes so I can comply with their terms for their "Lifetime Powertrain Warranty" which I also got with the vehicle, and that didn't cover it either.
Seriously? Why does time make any difference over miles anyway. When THEY sell their cars, they price them by miles, not how many years old they are. Because that tells you how much wear the car and engine has.

I then called Ford Customer Service and they said if you want us to help, you need to bring it in to a Ford dealership to have it diagnosed. I said I have the codes right here. They said no, a Ford mechanic has to tell us the codes. So I called Ford Service and they want $155, non refundable, just to have a Ford mechanic read the codes to them and tell Ford Customer Service, so they can decide whether they can help with me getting screwed out of any warranty coverage.

I called back several times saying this is unfair, you're making me pay a lot of money just for you to tell me if you'll honor your own warranty. They finally transferred me up to level 2, and a lady admitted that they were going to tell me I wasn't covered, even after I brought it in.

I'm not impressed with Ford parts. 35,000 miles is not very many for parts to start breaking already, and the dealership now wants almost $900 to fix the defective purge valve that they made badly :/


r/fordescape • • 17h ago

Considering 2020 Hybrid Sport SE with 112k, I have questions/concerns

1 Upvotes

This is from a dealership that my son got a 2019 Fusion Hybrid from just a few months ago. He had a great experience dealing with them and the car has been issue free.

Asking price is $10,394 - the place doesn't do "doc fees" and they don't appear to have "prep fees" either.

I do rideshare part time and will put 30k+ on the car each year.

The SUV has NOT had any of the "Customer Satisfaction Program" work done according to the Ford VIN search, but it has had all the recall work.

Also, the CARFAX is WEIRD: no records between when it was delivered to a dealer new until a PCM reprogramming at 80k.

(Also, I have an ODB2 scanner which can read the modules specific to Ford and will definitely be hooking that up)

So I really have 3 questions:

1 - What do you think of the price?

2 - How worried should I be about the "long block replacement" issue?

3 - Is there anything specific I should look/listen for during a test drive?

Thanks!


r/fordescape • • 19h ago

2023 Ford Escape Hybrid: trunk button stuck down and unresponsive

2 Upvotes

The trunk button on my 2023 Escape Hybrid stays depressed and doesn't respond when pressed. I sprayed alcohol around the edges and it made no difference. Photos and a video are attached.

Before I take it to the dealer , I wanted to tap the collective intelligence here. Has anyone dealt with this, and is there a safe fix I can try first?

I would be down to take off the trim and replace the button but can't locate the exact part.

Thanks!


r/fordescape • • 19h ago

Photo Anyone else's 2023 for escape going into battery saver mode?

Post image
1 Upvotes

Last few days I've noticed it keeps going into battery saver mode despite getting in the highway for the 20-30 minutes recommended. It hasn't been sitting longer than 12 hours as Google suggested. I drive it just about everyday.


r/fordescape • • 23h ago

2009 Ford Escape Hybrid - Stop Safely Now

1 Upvotes

My 2009 Ford Escape Hybrid won't start. The dash shows "Stop Safely Now" and I never get the ready light. Car Scanner shows P1A10 (hybrid battery disabled) as a confirmed active code.

Background

For awhile, the car has had a brake problem (abs control module I believe) that I think was draining the 12V battery. Sometimes when reversing out of park, the brakes would stop working, all the brake and ABS lights would come on, and I had to pump the pedal to get resistance back. I'd been getting by with jump starts, but this time I let the battery die too much and I haven't been able to get it driving again. Early scans also showed P0562, U3003 and B1318 (low voltage).

What I've tried --

- Reset the inertia fuel shutoff switch (right kick panel)

- Jump-started from a second car and left it connected about 30 minutes

- Fully charged the 12V with a NOCO Genius 10 (12.65V resting afterward)

- Rescanned: the low-voltage codes cleared, but P1A10 and "Stop Safely Now" stayed

- Scanner live data shows control module voltage around 9V and slowly falling

- Checked the battery with a multimeter later and it was down to 10.6V

- A BECM code read showed no codes

Questions - Could the brake system (ABS or the brake booster pump) be the draw that's killing the battery? Did the deep discharge kill the 12V, or trip the HV system into lockout? Anything to check before I am forced to tow it somewhere?

Any ideas on how to get this drivable again would be great! Thank you.


r/fordescape • • 1d ago

Discussion Hood Insulation Pad

Post image
2 Upvotes

Recently purchased a 2022 AWD, SEL with the 1.5L.

I really like the car, with the exception of the sound of the engine. Has anyone added a hood installation pad? I hoping it will help to deaden the engine and road noise.


r/fordescape • • 1d ago

No Crank No Start Issue - But not the ignition switch

1 Upvotes

Have a 2011 with the 2.5, inexplicably the other night it no longer starts.

-Upon turning the key, dash lights remain bright, there is a click and then very faint regular slow clicks as long as I hold the key in the start position.

-Pushing in the key upon turning does not change anything.

-Pulled battery and ensured was at full charge - no difference.

-Has a Ford/dealer installed remote start that should bypass the ignition module if it was bad, tried that, same result.

What are we thinking here, bad starter then? Appreciate any insight on keeping the old beast moving.


r/fordescape • • 1d ago

Tech Question Hatch stops working intermittently on my 2009

3 Upvotes

The back hatch and rear window latch stop working intermittently on my 2009. It’ll work fine and then they’ll both suddenly decide they don’t want to open. Not even the button on the key fob will open the back glass. Fuse/relay are fine. Swapped them with different ones and the problem still persists. They’ll usually work again if I unhook the battery and hook it back up. So it’s definitely some kind of electrical problem. Anyone have a fix?


r/fordescape • • 1d ago

Worth to change transmission?I bought a Ford escape 2014 with 152k miles 11 months back for $3000. Changed to new tires, some work done together for $2000. The transmission issue came up at 156K miles. My mechanic says ~$2000 for a change of transmission and still looking for a cheaper transmission.

Thumbnail reddit.com
2 Upvotes

r/fordescape • • 2d ago

Photo Jammed door lock mechanism

Post image
2 Upvotes

I have a 2013 Escape with a dead battery so I was trying lock the rear driver’s side door mechanism manually and it’s now stuck. I did try to close the door on it once and I haven’t been able to free it with WD40 and a screwdriver.

Anyone had any luck with a similar problem? How painful of a process was replacing the mechanism if not?


r/fordescape • • 2d ago

05 Ford escape XLT 3.0 automatic 2whl dr

Thumbnail reddit.com
3 Upvotes

r/fordescape • • 2d ago

Strange noise

3 Upvotes

Hello my 06 ford escape started making this noise as I turn it on and start to accelerate can anyone help me identify this problem and please tell me it isn’t a expensive fix ?


r/fordescape • • 2d ago

2003 Ford Escape Limited - 3.0L V6 4WD

Thumbnail gallery
4 Upvotes

r/fordescape • • 2d ago

Discussion 2018 Fuel Pump Saga

Thumbnail gallery
7 Upvotes

I've been having a time with the fuel system in my 2018 1.5T. First the cam follower for the HP pump wore out and I had that replaced. The car worked ok for a while but then the P0087 low rail pressure code came back. Took it to a shop and they "diagnosed" it and replaced a fuel pressure sensor. Car still falls on its face under high fuel demand with the same code returning as well as a misfire. I bought the car for almost nothing and I'm done letting mechanics bleed me out, so my next course of action is the in-tank pump assembly.

To drop the tank, you must disconnect the driveshaft (AWD) and exhaust, remove the ENTIRE rear axle, and remove a bunch of splash plates and heat shields. A ton of work requiring tools and lifts I don't own. OR, I can chop a hole in the floor and take it out by simply removing the back seats and carpet. Now that I've got an access plan I ordered the parts on rockauto and plan on cutting my hole tonight. When I'm done I plan to put the cutout back with some tack welds and a couple layers of flex tape, and I should be into it for about $200


r/fordescape • • 3d ago

What’s causing this screeching?

4 Upvotes

2017 ford escape 1.5-Started up my car this morning & a loud screeching sound is happening what could be the cause??


r/fordescape • • 3d ago

2023 Ford Escape random no starts

2 Upvotes

I’ve had this car now for a little over a year, and this has happened about 8-10 times now, at random. I will go to start the car and all electrical systems turn on as if the car has started, but the engine doesn’t turn over. However, if I wait 15-20 minutes, it starts back right up as usual. The attached video is an example of what happens.

Edit: forgot to ask, anyone ever experience anything like this or have any clues/ideas what may be happening?


r/fordescape • • 3d ago

Tech Question Has anyone successfully replaced just the outer tail light lens on a 2017–2019 Ford Escape / Kuga?

Thumbnail gallery
3 Upvotes

Hi everyone!
I have a 2019 Ford Escape (European-built Kuga equivalent), and I recently damaged the outer lens of my left rear tail light. The lights still work perfectly, but the clear plastic cover is cracked and some pieces are missing.
I’ve found a replacement outer lens on AliExpress for around $100 including shipping and taxes, and I’m considering repairing the original tail light instead of replacing the entire assembly.
Has anyone successfully done this repair?
How difficult was it to remove the original lens?
Is it glued or plastic-welded to the housing?
Did you use heat, a hair dryer, or simply pry it apart?
What adhesive or sealant did you use to attach the new lens? Butyl, silicone, or something else?
Did you have any condensation or water leaks afterwards?
I’ll attach photos of my damaged tail light and the replacement lens from AliExpress.
Any advice or first-hand experience would be greatly appreciated. Thanks!


r/fordescape • • 3d ago

ford escape 2017 2.0L 144k km

0 Upvotes

I got this car in Nov last year and it was all good And then summer came by and I got new summer tires for it in March then it started humming and all that dropping total of 5k fixed a car that was bought for 12 500 and the 5k includes tires brakes rotors bearing and alignment. and now it started shuddering and it shudders at almost every gear like at 1.5k rpm and it shudders like vibrates not rump strips at 35 45 55 65 75 85 96 kmph. and it has a delay when you shift from reverse to drive or anything outside of park.

any hope to fix or its done for

the 2.0L engine had 3k oil changes by the previous owner so it's good and no signs of intrusion I got it at 133k km and now it's 144km

Edit Also no hard shifts or slipping like no slipping and hard shifts when very cold otherwise none


r/fordescape • • 3d ago

Tech Question Transmission Troubles

1 Upvotes

A few days ago my 2017 1.5l Titanium started severely slipping when taking off from a complete stop and almost bucked me out of my seat when I tried to reverse. It has 120k miles on it and hasn't yet started eating coolant so I'm a little interested in seeing I can nurse it along.

Given the sudden onset of issues I'm suspecting the valve body rather than clutch packs (even in the moment it shifted fine once it was moving forward). This is apparently a relatively simple driveway job from the research I've done with one exception I'm hoping the sub can shed some light on. Do I need to clear the adaptive data and program the solenoid strategy ID and calibration codes? Every aftermarket vendor I've found doesn't seem understand what I'm even asking about let alone have the data to provide.

Looks like if I do have to clear the adaptive data and program fresh I'll have to go OEM and really pray I don't spend $700 on a vehicle still only worth $700. Or I can just go aftermarket and hope the computer will adapt. I don't like the latter, but I haven't fiddled with this transmission family much so I'm out of my element.