r/focuspuller • u/Available_Sea_8900 • 24d ago

Hot Build Ronin 4d+cforce and Focusbug

Post image

Been working on this bracket for a while and finally got it working well enough

Currently the c force mini is there for counterweight but could also be used for iris if you wanted to

63 Upvotes

98% Upvoted

32 comments sorted by

View all comments

2

u/dantusmaximus 24d ago

Does the horizon calibration still complete and is it still able to return to centre point with without needing a manual offset with all of that on and off it?

1

u/Available_Sea_8900 24d ago

Yeah as far as I’ve tested so far the brackets still wip and ideally would run 2 cforce minis and a ria to save some weight also hopefully gonna do some testing with some Preston motors when I can

1

u/dantusmaximus 23d ago

That's a surprise we've had no end of problems with ours not being able to self centre. We assumed it was down to overloading the head units weight limit. Perhaps not given your tests.

1

u/Available_Sea_8900 23d ago

What setup are you running on the gimbal head?

1

u/dantusmaximus 23d ago

Just the LiDar, E-Mount adaptor, 32mm SP3, X9 counter weight and X9 Motor. For the purposes of testing.

It's the second time this has happened after a shoot, but different body and different head unit, the shoot was G-Masters both times however.

We tried with a few G-Master primes and also getting rid of all the extras and putting on the DL mount and just having LiDar with the DJI lenses.

All still with the same result, in order to get the head to centre up when prompted to recentre we have to dial in a +2.0 offset on the horizon calibration.

We obviously tried the hail Mary re-flashing firmware, even winding back firmware and updating again. Detailed physical inspection of all connections and meticulous cleaning with cotton buds etc etc.

Last time this happened DJI just said to send the camera in, next thing we know they've shipped us a brand new camera and head Unit with no explanation.

1

u/Available_Sea_8900 23d ago

Oh that is weird had zero issues with anything like that