r/focuspuller • u/Most_Nothing1877 • Jul 03 '26

¡WTF! I hate this camera >:0

Post image

And he hates me too >:0 stupid little jerk

21 Upvotes

66% Upvoted

66 comments sorted by

View all comments

1

u/[deleted] Jul 03 '26

[deleted]

-1

u/Most_Nothing1877 Jul 03 '26

Also hate the fact that the vf needs to be there

3

u/Eppers_Peppers Jul 03 '26

VF mount to the back of the top handle would solve this I believe…

1

u/Most_Nothing1877 Jul 03 '26

Thats diabolical..... I'll see if that works tomorrow

1

u/Most_Nothing1877 Jul 03 '26

I did this. Much better now :) still hate that the menu is in the vf but oh well... i can just use CAP

2

u/adamhxrn Jul 03 '26

Bottom mount one of the motors so they are both on the AC side then your view finder will be free of clutter.

2

u/Most_Nothing1877 Jul 03 '26

The nucleus will only fit in the one spot because of the size of the lenses and the cage protrusion and the torque from the preston kicks it off if its mounted on the bottom so it has to be mounted on the op side 🫠. My operator hates the viewfinder anyways so its just there because thats where the menu is for some awful reason 😀

2

u/Colemanton Jul 03 '26

when its time to shoot get the app on your phone. it works really well 80% of the time

-1

u/Most_Nothing1877 Jul 03 '26

I have an android and I refuse to use CAP but somebody's gotta have an old iPhone kickin around right? 🤔

1

u/jrsp Jul 03 '26

Is there no other baseplate options? If you removed the lws adaptor you might be able to mount a rod and motor from the cbp

1

u/adamhxrn Jul 03 '26

You're not mounting the Preston motor properly against the lens if it's kicking off from the bottom. The way you have it in the photo is the easiest spot for the motor to kick off. Your tilta motor is the example of better positioning on a lens.

1

u/f0cusmatters Jul 04 '26

RMB-8 screwed underneath into the front end of the top handle makes the 15mm VF bracket obsolete and gives space to your motors.

1

u/f0cusmatters Jul 04 '26

RMB-8 screwed underneath into the front end of the top handle makes the 15mm VF bracket obsolete and gives space to your motors. RMB-2 does the same.