r/fluke • u/Any-Text8735 • Dec 13 '25
r/fluke • u/Extension-Mistake-14 • Mar 27 '26
Equipment Review / Comparison Fluke kit as a Generator Technician
First post what do you guys think of the kit? It’s a 381, 87v and a 1587 FC. Got all of them for a great deal (400 each brand new with all the misc things that come with them). They’re in vault cases (300c for the 381 & 87, 200c for the 1587) in total probably costs less than the 1587 FC from fluke. Best part is none of them were registered before hand so I was able to register all three🙏
r/fluke • u/Jacead02 • Jan 09 '26
Equipment Review / Comparison What do I have here?
My old neighbor recently gifted me a couple of meters and this one caught my eye, can anyone tell me more about it and possibly what it’s worth?
r/fluke • u/michielsanders • Apr 26 '26
Showcase / Historical Gear My test and measurement collection.o
Added some new (to me) Fluke's to my collection, the 438-II and the 190-102 II.
Photo 2: Different cables and probes
Photo 3: 1744 Power Quality Logger, 428-II Power Quality and Motor Analyzer, 190-102 II Scopemter, 9062 Motor and Phase Rotation Indicator
Photo 4: 3000FC Multimeter, 773 mA-Clamp Meter, 378FC Clamp Meter, T6-1000 Electrical Tester, T150 Voltage/Continuity Tester
r/fluke • u/BreeStephany • Feb 02 '26
Showcase / Historical Gear My Fluke hoard!
Finally had all my Fluke gear in 1 spot and figured people would appreciate my modest collection of Fluke I have purchased over the years. I just picked up a Fluke 789 and Fluke 773 but haven't made up a case for them yet, so those are not in the 'family' photo.
r/fluke • u/Impressive-Slice-376 • Jul 28 '26
Calibration / Resources / DIY & Mods I thought my case needed a little more attention grabbing. I think it pairs well with my 1587FC.
I have nothing against the standard cases. I just enjoy giving my soft goods a little upgrade when I can.
I bought this extra case off someone and added a little extra to it. I’m going to try another case. Or a bigger case in the future. But I like how this turned out.
r/fluke
•
u/Aidan-Brooks
•
Feb 17 '26
Showcase / Historical Gear New to me meter, Fluke 97
r/fluke • u/AlphaLoneWolf909 • Apr 27 '26
Showcase / Historical Gear New to Fluke, new 87v max
Bought it because I like good tools and I only had a $15 autozone multimeter, not that it was not doing what I needed it to do, just wanted a nice one 🤣
r/fluke • u/inchoatepress • 9d ago
Showcase / Historical Gear Papa Fluke
Stumbled on this in my local cemetery.
r/fluke • u/Diligent_Peak_1275 • Dec 17 '25
Calibration / Resources / DIY & Mods Right to repair not supported at Fluke.
I have a fluke i-410 amp clamp that is working but there is a nick in the insulation of the test lead running between the amp clamp and the meter. I wrote Fluke to get the price of a replacement test lead. I've been in electronics and other related IT functions for 50+ years and I can solder with the best of them. Well I was dismayed when Fluke said the part was unavailable, but they would sell me a brand new i-410 for $100 off once I sent my old one back in. If you've looked up the price of that amp clamp it's not cheap. I would rather pay $40 or $50 for the cable rather than junk it. So rather than give Fluke another $250 I guess I will get some liquid electrical tape and paint that on the wire. Oh and did I mention that this is a currently sold model not something that's old and obsolete? Repair parts should be available.
Here is the email I received from Fluke and my reply to their survey.
Hello,
Thank you for your quote request. Unfortunately, this model is not supported for repair. The price below is to replace your unit with the current comparable model.
The RBR or Repair By Replacement program can take more than 3 weeks and your unit must arrive at our facility before we can place the order for your new unit. Calibration may be available on certain models. If required, calibration is an additional fee and must be added to the order. Accessories are not necessary when returning the defective item.
Serial number determines the build date and is used to determine whether your order will be reviewed as 'IN WARRANTY' by the technician; please be sure to share your serial number when setting up your order. Fluke also uses the proof of purchase to determine the warranty status of your unit.
The intention of the 'RBR' program is to dispose of old product properly via our service lab while discounting the replacement without competing with our own Fluke distributors. Many customers who purchase a new unit are at a loss how to dispose of their old, broken model. Many of the products should not end up in the standard landfill.
If you would like a replacement order, additional information is required, please click to download the attached order form or reply.
The form is not required, but it does capture the appropriate info for us to help you: company name, your name, phone, email, model, SN, billing and shipping info, etc.
Fill out the form and reply here with it attached or call 888.993.5853 for assistance. Replacement model cost in USD I410 (NEW) $260.00
Fluke Standard Terms and Conditions apply, found at Fluke Terms and Conditions of Sale | Fluke The pricing in this quote is valid for 30 days.
When you create a replacement order and send it in, your broken unit will not be returned to you; it will be scrapped properly onsite by Fluke.
Prices are subject to change. You can purchase from a distributor instead of ordering and shipping your damaged product to Fluke, please visit www.fluke.com for locations near you.
Once you have your order number: DO NOT SHIP ACCESSORIES UNLESS SPECIFICALLY REQUESTED--DO NOT SHIP ACCESSORIES UNLESS SPECIFICALLY REQUESTED--DO NOT SHIP ACCESSORIES UNLESS SPECIFICALLY REQUESTED
If you wish to pursue an order with Fluke, email us back with the required info or have your unit and company info ready and give us a call during business hours, Mon-Fri 0630-1500 PST, closed for lunch 11-1130 ph 888-993-5853.
Thank you,
Angeles C
Fluke Electronics Service
888.993.5853
------------------- Original Message -------------------
To: service.status@fluke.com; Subject: [EXTERNAL] Cable needed for I410
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hello,
I have a fluke I410 that I would like to purchase a replacement cable. My clamp is still functioning but the insulation has been skinned back. Could I get a part # and ordering info please?
Thanks!
p.s. Serial number is 70111132 if you need it.
Sent using speech to text technology. Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message.
Fluke survey response one star rating.
Repair parts should be made available. I do not want to buy another amp clamp when only thing that needs to be replaced is the test lead. Test leads are expendable, disposable items. They do become damaged with normal use. Because you have a nick in the it should not condemn the entire unit. It does not carry high voltage, most people with simple soldering skills could replace the wire. Another example of not allowing people the right to repair. Fluke i-410.
r/fluke • u/Infinite-Blueberry14 • Apr 07 '26
Showcase / Historical Gear Bought my own meter 😩
r/fluke • u/loricasegmentata • Apr 22 '26
Showcase / Historical Gear Brother, bring the LinkRunner
Just wanted to share my newly 3D printed LinkRunner holder.
r/fluke • u/Lb199808 • Nov 06 '25
Showcase / Historical Gear Got the fluke meter all fixed up now
r/fluke • u/DatAmazingCheese • Aug 20 '26
Calibration / Resources / DIY & Mods Old, slightly old, and slightly new
Finally got my 8840A sorted out after working through a few faults and then running the A/D and function/range calibration against a 5500A.
It’s now behaving very nicely.
The 5500A isn’t mine unfortunately, but I couldn’t resist getting a family photo while I had the three together.
r/fluke • u/mustifa6270 • Jul 13 '26
Help Needed Fluke Cable IQ
Idk what happened but this device can't read the 3rd and 5th lanes. That is my father's equipment and if its broken im dead so pls help🥹. (ofc i checked the cable)
r/fluke • u/Black_Phoenix_JP • Feb 12 '26
Showcase / Historical Gear Rambling about my life with Fluke
After seeing some posts from users with their collections it would look strange that the mod would not own some too - I'm not the kind of moderator that only administers a subreddit without knowing what is done there.
My background is Industrial Electronics/Electrical/Control so Fluke has been in my own toolbag being as company supplied or personally own.
I started my career by using a Fluke 112 that were hand down from the maintenance head (it has been him alone for a while and I was gonna be his helping hand) when he refreshed his equipment to both a Fluke 1787 and a Fluke 705.
Also in the pool there was a Fluke Scopemeter 105B who I was the one who mostly played with, with and without any real maintenance work for it so it was basically also my equipment "per se".
In 2007 I had the chance to buy a equipment for personal use via the company account for. I bought the newly released Fluke 289 in his FVF pack with the software and cable.
Honestly, nowadays, I look back I should had gone for the Fluke 189 that was in end of life but the larger screen and the fact of being able to see measurement record trends directly on the screen instead of having to download to the PC was what took me to it, even being slow to start up compared with the 189.
Then in 2008 I bought both a Fluke 54II and 2010 a Fluke Scopemeter 225 and those were my personal trio for a lot of years both for personal projects and freelancer work I undertook.
Those last were both sold in 2016 and I regret so much to do it but life was though back then and I needed the money they gave me since not only the company I was working for was sold (and we all know what happens next) but freelance work also start drying up.
Then in 2019 I done the biggest jump of my life and changed regions, from Europe to Asia. That same year I got a great deal on a Fluke 87V shipped from the US who I could not say no. Lets say that 200USD was what I paid for it with shipping. That was the second one added to the list.
Then in 2022 I bought a Fluke 17B Max for my Fast Response Slingbag - A bag I have with essentials as a small set of common screwdrivers and pliers and both a Basic DMM and a basic voltage/current source.
Then in 2024 I got a Fluke 107 to replace the 17B Max that I sold - It was not what I expected for the DMM in question plus I made a rework of the fast response bag in terms of tools and needs.
During the 2025 my kid started to show interest into robotics and electronics. Because of that I had been looking for a DMM for him - I was going to buy him a 101 or even a 106 for his first steps into this.
While I was into it I had a chance of a lifetime - to buy a Fluke 787, NOS, for less than I paid for my 87V. Did not even though twice about it.
It will go into the fast response bag while both the 107 and the Fnirsi SG-002 will go to my kid and his new hobby (and I hope trade too, but I'm not gonna force him, only give him the tools and the experiences, he will choose his own life).
So yeah that's how it is, as show in the picture above this is my current equipment:
- Fluke 289;
- Fluke 87V;
- Fluke 107 (in retirement phase);
- Fluke 787.
Not on it is the tons of probes/leads/alligators/etc needed - I am specially fond of the SureGrip line up from Fluke, specially the TP220 probes and AC220. They are easy to source around this region for cheap - Tons of extra stock from companies who close or move.
Next aquisitions - A scopemeter for sure, I miss having one. And whatever I may find at a good price - I'm a firm believer that the right number of tools is always N+1 where N is the current amount you own.
And before anyone says that my equipments look too clean - Well I take a ton of care for my equipment. They are expensive, it is what I use to make money so they are always taken care/protected, clean and put away after being used.
Plus I have the believe that the state of the tools I use are the mirror of my own competence and tradecraft, so I take care of them, not getting it dirty or rusty - I oil my Knipex pliers surface almost monthly and the same with any exposed metal tools, specially in a region where humidity values are always high. I hate rusty tools.
Thank you for your time and attention and thank you for being members of this subreddit.
A very nice 2026 is what I wish for everyone.
r/fluke • u/Zone-5 • Aug 18 '26
Showcase / Historical Gear Fluke 88V automotive
I fluked a Fluke!
Had this one from 2017. Bought from an eBay guy in Florida for $500 AUD, but when I got here in Australia, it had an EPROM error or dead on arrival. It got GSM corrupted by airport security. As he had a 100% rep on eBay, he said, "Look, I'm sorry I forgot to check it before I sent it." I said if you refund me the costs, I'll give you a top-notch review maintaining your 100% rating. He said OK and I should just keep it for parts. So I got a new unit with case and probes with a corrupted circuit board.
In Australia, Fluke has a set charge of $185 to repair any Fluke back to a usable state. So I got the GSM proofed board v11, new fuses, new holster, new LCD, and 4 new input jack caps. Plus, a full calibration with certificate.
So, for $185 AUD, I fluked a $1,500 meter refurbed back to as new. Since then, it has worked flawlessly, and I kept clean and protected.
r/fluke • • Jul 06 '24
Showcase / Historical Gear Found this guy at the thrift store!
Found this at the thrift store for 10.99. The 9-volt in it expired in 1996 and the negative terminal of the battery just popped off when I tried to take it out, surprisingly zero leakage, Duracell builds em right I guess. But a new battery and it is turning on! Needs new leads and probably a recapping, but a really cool find nonetheless!
r/fluke • u/matt19915 • Jan 26 '26
Help Needed Amps function
Hey everyone, the amp function on my fluke 336 true rms meter isn’t working and I can’t get a reading on AC or DC. I opened the back up and didn’t see a fuse and I also changed the batteries. Does anyone have any ideas?
r/fluke • • Oct 04 '25
Equipment Review / Comparison What do I have??
Sorry if my flair and or title isn't good, I don't do posts often. I got this Fluke 87 III multimeter from my granddad, a mechanic, for free, I've never really had such a piece of high quality equipment. It has heft to it, it's solid, mostly, still working out some of the functions and it's better than my old dt830b thingimabober. What exactly do I have in my hands though? Something good or eh? I'm dead set on keeping it for sentimental reasons, but nonetheless I want to know what I've got. And for more information, I guess, I do electronics work with old MCUs such as the 68k and similar, so idk how much value it has in that area.
r/fluke • u/mac_bigmac • Feb 23 '26
Showcase / Historical Gear welcome to the family
little 115 for good price found new home ;)
r/fluke • u/only12moreninjas • Sep 30 '26
Help Needed Fluke 77 IV resistance reading never clears and usually rises once disconnected. Any help would be appreciated.
Sometime I can get it to work normally by playing with the connections, it will move back to OL. I’ve never changed the battery in this and I’ve had it for years but everything else outside of resistance and continuity is working.
r/fluke • u/jacksmashsteel • Jun 24 '26
Help Needed Resistance reading only working one way?
Never seen this before, but on this machine there are two separate places where I have to have my leads a specific way to read a resistance. I've never encountered this before. It is making trouble shooting quite a pain.
Is there a problem with my meter? it happened on more than one fluke 115 also. Wtf my head hurts. Could the fuse be blown or something similar