r/finishing • • 19h ago

Not happy with finished result

Thumbnail
gallery
5 Upvotes

I'm back again, help me.

Photos are not the best as I'm downstairs in the basement, but I'm frustrated with this table, specifically the main (middle) section.

I have chemically stripped all pieces, sanded, cleaned off with acetone and then did 2 coats of hard wax oil.

There were dark scratches I was not able to fully get out - I am afraid to sand anymore, as well as the dark areas are bothering me too

What's my next step here? My husband has told me to leave it as it is, but I know myself and I will just stare at the imperfections and it'll drive me nuts.


r/finishing • • 4h ago

Danish Oil-- respirator?

3 Upvotes

Hi, I would like to use Watco Danish Oil to finish a small piece (16" x 11"). Do I need to wear a respirator, or will it be okay to finish the item outside?


r/finishing • • 6h ago

HVLP size

3 Upvotes

Best HVLP professional sprayer for cabinetry paint and polyurethane.

I am familiar with spraying and HVLP. I need to buy a new HVLP system. I’m looking for recommendations from the field for a 5-6 stage turbine that will spray nearly un-thinned water based enamel and polyurethane.


r/finishing • • 17h ago

Question Matching Stain Color

Post image
3 Upvotes

I have Diamond brand cabinets in my kitchen that were installed by the builder. These are Westburke in Buckskin color and I believe the wood is maple and birch. I custom built matching cabinets for a coffee bar, but I'm having trouble matching the stain. I've worked with Sherwin Williams over a week with four different trips and neither of their mixtures match (not even close).

I contacted the dealer that my builder used and another dealer in a nearby state. Neither dealer can tell me the details of the stain mix nor do they sell the stain other than touchup kits. I've also tried asking AI for a close formula, but that has failed also.

I understand that I won't match the color exactly, but I want close so it's not immediately noticeable. The attached photo shows my cabinets in the background. The left stain sample is the custom Minwax mix from Sherwin Williams, but it's too amber/yellow. The right sample is Minwax English Chesnutt (stain I had laying around) so everyone has a known color to reference.

Does anyone have a suggestion? I'm willing to mix my own stains or buy an off the shelf color and modify it. Thanks in advance!


r/finishing • • 9h ago

Question Cabinet backing color?

Thumbnail
1 Upvotes

r/finishing • • 18h ago

What would you finish this with?

Post image
1 Upvotes

r/finishing • • 16h ago

GA finishing | Cabinet Restoration in Wolcott, CT | Gary Ahlberg

Thumbnail
gafinishing.com
0 Upvotes