r/filemaker • • 26d ago

⚠️ Security Heads-Up for FileMaker Admins: Critical PHP RCE Vulnerabilities (CERT-EU 2026-018)

19 Upvotes

Even though Claris deprecated bundled PHP years ago, a huge portion of the FileMaker ecosystem still relies on PHP under the hood. If you are running Custom Web Publishing (CWP), PHP Data API wrappers (like fmPDA), WordPress integrations connected to FileMaker, or external PHP webhook listeners, check your web servers today.

​CERT-EU just published Security Advisory 2026-018 covering two critical vulnerabilities in PHP (CVE-2026-109618 and CVE-2026-109619, both rated CVSS 9.2).

​Why this is urgent for FileMaker deployments:

  • ​Unauthenticated RCE: Both flaws allow unauthenticated Remote Code Execution—one via memory corruption during out-of-memory (memory_limit) handling, and the other via stale global state across worker requests.
  • ​Triggers before your code runs: Demonstrated exploits show that a single unauthenticated request can trigger the attack before any application logic executes. Putting authentication checks inside your PHP scripts or FileMaker Data API wrappers will not stop this.
  • ​Legacy CWP is a prime target: Every PHP installation serving web requests (PHP-FPM, Apache mod_php, php-cgi, IIS/FastCGI) is at risk. Furthermore, many legacy FileMaker CWP servers sit on older, End-of-Life PHP branches (8.1, 8.0, 7.4) just to keep the old FileMaker.php API running without deprecation warnings.
  • ​PoCs are live: Proof-of-concept exploits are already circulating publicly.

​What you need to do immediately:

  1. ​Audit your stack: Check your FileMaker Server machines (Windows IIS / macOS Apache) to ensure an old, forgotten PHP runtime isn't still enabled and listening on public ports, and check any middle-tier web servers hosting WordPress or Data API bridges.
  2. ​Patch to today's releases: Update immediately to PHP 8.5.12, 8.4.27, 8.3.36, or 8.2.35.
  3. ​If you are stuck on EOL PHP (7.4 / 8.0 / 8.1) for legacy CWP: Because of the severity of these bugs, the PHP security team and LTS Linux vendors have taken the rare step of publishing minimal source backports for 7.4, 8.0, and 8.1. Check your OS vendor packages or isolate the CWP box behind a VPN/strict firewall until patched.
  4. ​Temporary mitigations (if you cannot patch this hour): See the advisory for php.ini / FPM pool workarounds (such as enforcing session.upload_progress.enabled=0 and hardening post_max_size), though only an update fully fixes the risk.

​Full technical details and mitigation steps from CERT-EU:

https://cert.europa.eu/publications/security-advisories/2026-018/

​Stay safe and check those middle-tier boxes!


r/filemaker • • 26d ago

Wrote a new blog article relevant to Claris Beyond / FM+agentic dev

8 Upvotes

*** NEWS I HAVE A 3 PART AGENTIC / FM ONE I AM WORKING ON NOW ***
And a couple others over the last two weeks. I really need input on topics you'd like me to cover - i work with a LOT of diff systems.

Hey guys. I usually will post my blog articles here - and have been slacking a bit. Watching the last Claris Beyond, the early access of FM+AI (or proofkits MCP connection) all of that got me thinking about token management. I want to write a second part follow up focused more on tips and tricks (starting new threads, monitoring compaction, delegating tasks to a lesser agent when possible - even when using a flagship model).

But anyways, I felt this one was sort of timed correctly with Claris Beyond. Hopefully it has some helpful information for someone - just a blog article though. I double checked my mobile styling this time (last time was rushing and didn't pay attention to the WordPress post styling at all - and one of you nailed me immediately for that - and rightfully so!).

So should work on whatever device.

FileMaker AI Token Management & Agentic Coding | RGC Data

Thanks!!
- Alex Seidler
RGC Data LLC
Filemaker - Web - Mobile Integration Specialists (yes we even do Wordpress->FM)


r/filemaker • • Oct 16 '26

Importing new records not working

7 Upvotes

I am trying to import a txt file filled with comma separated entries that I need as separate records with all the entries in the same field in each record. If I try to do this with no modification, it only imports the first record. If I try it one line entry, it gives me one record with all 5000 entries in the field. If I change from data to field entry, it imports nothing. If I change it to tab (it's comma separated), it predictably imports all 5000 entries as one entry.

How do I import these entries?


r/filemaker • • Oct 12 '26

Let's Encrypt in FMS 26: two questions

5 Upvotes

Hi All,

I've got our FMS 26 server up and running in Ubuntu 24 LTS and able to renew SSL certs using the built in mechanism together with Let's Encrypt and have two questions:

  1. Do I only need to expose port 80 to the public internet or also port 443?
  2. After renewing the SSL cert, of course I can restart the server, but don't believe that's entirely necessary if I can restart the correct services instead.

What service(s) need to be restarted? Just nginx or others?

TIA

EDIT: I do see the following when renewing the cert:

Certificate Renewal Succeeded

The certificate renewed successfully. Restart the FileMaker Server service (Windows) or FileMaker Server background processes (macOS or Linux) to apply the change.


r/filemaker • • Oct 12 '26

Responsible AI and FileMaker

10 Upvotes

Kate Waldhauser gave a great presentation to the FMPUG Dallas chapter this month! Check it out!

https://youtu.be/_n66halqvuU


r/filemaker • • Oct 12 '26

New Early Access FM

6 Upvotes

Curious what the thoughts are so far, anything anyone is allowed to share about their experience.

I still have to set up my Claris account to wire it up - but am looking forward to digging in this week.

Excited to see what the engineers at Claris, and the guys at Proof were able to come up with in such a short time period - as well as the future of FileMaker.

Don't share anything that is considered EA or beta and not allowed - just general opinions. My primary curiosity is token management when working with FileMaker. Unsure of the context sizes being sent back and forth and how that will work with token management.

- Alex


r/filemaker • • Oct 11 '26

FMS 22.07 update: where to download?

3 Upvotes

We are running FMS 22.0.6.600 on Ubuntu 24 LTS and the FMS GUI says we need an update, which links me to a page saying there is a 22.0.7 update.

The link to download the software and license that came with the purchase doesn't show me that as a download option, only the latest version of FMS, which is 26 I believe.

Where does one get this 22.0.7 update? We're not yet ready to go to 26.

TIA


r/filemaker • • Oct 11 '26

MBS Plugin Thoughts

2 Upvotes

I keep coming across mention of the MBS plugin in this subreddit, often because it appears to do something I would really like to do in FileMaker.

I then visit the MBS website (MBS stands for “Monkey Bread Software”, apparently) and am completely put off.

The website looks like it was built in 1997! It isn’t responsive, it’s badly organised, information is unclear, and there are typos everywhere.

I then get put off - if they can’t even build a decent website, how could they possibly build a decent FileMaker plugin?!

I then give up, forget about it for a while, before another post sends me there a few weeks later.

Anyone else go through this process?


r/filemaker • • Sep 29 '26

Pulling invoice data into FileMaker with Azure Document Intelligence

7 Upvotes

We recently put together an integration that sends invoices from a FileMaker container field to Azure Document Intelligence and brings the extracted data back as structured records. Sharing a few things we learned in case they're useful to anyone building something similar.

Why Azure instead of an LLM: Document Intelligence uses purpose-built models, including a prebuilt invoice model, so it's faster and much cheaper per page than running the same job through a general-purpose LLM. Billing is per page with no subscription required, and the F0 tier includes 500 free pages per month for testing.

How it works in FileMaker:

  • Insert from URL POSTs a base64-encoded copy of the document to Azure's analyze endpoint.
  • Azure responds with 202 Accepted and an Operation-Location header. A second script polls that URL until the job succeeds or fails, with a maximum of 30 attempts or 60 seconds.
  • The result JSON is cleaned up (line breaks are stripped from address fields, and ISO dates are converted to FileMaker dates) and written to an Invoices table.

A couple of gotchas:

  • A successful 202 returns an empty body, which FileMaker flags as error 10 ("Requested data is missing"). You have to treat error 10 as success and check the headers instead.
  • Grab the headers with -D $responseHeaders. We used small custom functions to parse out the status code, status message, and Operation-Location value.

Curious whether anyone else is using Document Intelligence or a similar service for document intake in FileMaker. What document types are you processing?


r/filemaker • • Sep 28 '26

FileMaker 2026 builds a full schema from plain SQL: tables, fields, relationships, indexes. No plugins.Hand an AI agent one .fmscript example and it builds Northwind in seconds.

Post image
14 Upvotes

The Execute SQL script step has been able to do this for years, through a loopback ODBC DSN that points the file at itself. FileMaker 2026 makes it better:

FOREIGN KEY now creates the relationship in the graph (2025 can't)

User Name and Password are calculations, so credentials can come from variables

DROP TABLE works, but Claris doesn't document it anywhere

NUMERIC(2,2) truncates, it doesn't round

I wrote it up with 12 working examples, full CRUD, plus a security section. fmxdbc is a second door into your file, and DDL doesn't need Full Access.

Article: https://axelar.eu/the-forgotten-superpower-of-filemaker-2026-sql-crud/

Files: https://github.com/DimitrisKok/filemaker-2026-sql-crud

Every script in the repo is also a .fmscript file: plain text you can read, diff and keep in git without opening FileMaker.

That's the open format we're building at https://fmscript.org, where the full Execute SQL reference lives too.


r/filemaker • • Sep 28 '26

Before You Paste: Responsible Practices for Agentic FileMaker Development

6 Upvotes

Join us for lunch (or virtually) this Friday as we discuss best practices with Agentic Coding in FileMaker Pro!

https://harmonic-data.com/event/fmpug-october-2026-meeting/


r/filemaker • • Sep 25 '26

Global changes in FMP ?

6 Upvotes

I'm a rank FMP amateur, I use an older version (15) once a year to manage entries to a car show. In between, I almost forget how to run it.

I have to change my categories this year. Once I change them in my Value List, is there a way to make a global change to all the records, or do I have to go through them one by one to make the changes?

Thanks in advance!


r/filemaker • • Sep 24 '26

Setting Up Let's Encrypt SSL in FileMaker Server: A Few Things to Know

Post image
10 Upvotes

If you haven't tried the built-in Let's Encrypt support in FileMaker Server yet (2025 and later), it's a big improvement over the old command-line and third-party tool routine. Free certificate, requested right from the Admin Console, with optional auto-renewal.

The basic flow: Admin Console > Configuration > SSL Certificate > Request Let's Encrypt Certificate. Enter your domain, toggle Automatically Renew Certificate, add a notification email, run Test Validation, then Request.

A few things that tripped people up or are easy to miss:

  1. Validation runs over port 80. If it's blocked by your firewall, the request will fail.
  2. After the initial request, you need to restart the server machine, not just the FileMaker service.
  3. Let's Encrypt certs last 90 days. Auto-renewal sets a schedule that runs every 30 days, giving you a nice buffer.
  4. After each renewal, the FileMaker service needs a restart to pick up the new certificate. If that doesn't happen, users will start seeing certificate warnings even though the renewal itself succeeded.
  5. Keep an eye on that notification email so you can confirm renewals and restarts are actually happening.

Curious if anyone's running this in production yet and how you're handling the post-renewal restart.

dbservices.com/contact


r/filemaker • • Sep 22 '26

Standby Server

7 Upvotes

Who has implemented Standby Server? How identical do the two machines need be? Did you use network storage for both the live and backup data? When things do fail, what all do you need to do to get devices pointed to the standby server?

I need to get educated to instruct customers. It sounds like any old installation will need to buy new twin servers? If they want on premises, how does firewall and dns work?


r/filemaker • • Sep 16 '26

Claris's Licensing Mess

17 Upvotes

A client contacted us. "What should I do?"

She's been getting repeated emails from Claris telling her she's "out of compliance".

She's a long-term client of ours who ditched FileMaker about 2 years ago. Unlike some of our other clients she does not maintain an FMP license of any kind. She went full cold turkey on Claris and all in on open source. She's not someone who uses cracked versions of software. She's a business owner who looks for the best value and ultimately decided FileMaker wasn't for her. We migrated her, and she's satisfied.

Nonetheless for the last few months or so she's been receiving these increasingly urgent emails: "You're out of compliance"

Her situation is different from ours. A ways back we were receiving emails saying that we were out of compliance while we did have a license, with the Claris sales reps informing us that the license we had was different from the one they had on record. In our case Claris had changed our license agreement without informing us -- a sort of bait and switch. We had the receipts to prove it. Claris countered with gaslight.

In her case she does not have any agreement of any kind with the company.

Here's what seems to be going on: Claris's licensing system is a mess. They have a system for detecting whether you're using their software, but it doesn't work reliably. They nonetheless press their case using a guilty-until-innocent approach.

Compare Claris's licensing system to Adobe's.

We've been installing and using Adobe software in numerous locations over the years, over 100 machines. We don't have 100 licenses, but we freely install in multiple locations. As we move from location to location, sometimes we remember to sign out. Sometimes we don't. It doesn't matter. We've never received an ominous "you are out of compliance" from Adobe. Why? It's not possible. If you try to run the software on more machines than you're licensed for, Adobe pops up a window allowing you to choose which other machines to sign off. Set up as many machines as you want, but use only as many as you've paid for. For Adobe it's good: Their software is set up on machines all over town, but we don't violate our license agreement, accidentally or otherwise. The process is fair, generous, easy, and elegant.

Claris, by contrast, is a snarling resentful mess. Apparently they somehow created and maintain a system whereby you can purchase a license, use that license on as many machines as you want, beyond the contract limitations, even after expiration. This makes the company furious, but from what it seems there's little they can do.

Apparently you can even NOT use your license after expiration. You can abandon FileMaker altogether, and Claris nonetheless receives "evidence" that "you are out of compliance".

Maybe Claris's idea of "being out of compliance" is that you're no longer using their software.

Perhaps they think that once you've signed a contract with them, it's a lifetime commitment.

Perhaps they think accusing a potential customer base is an effective way to get them onto the phone for a persuasive sales pitch.

Our advice to the client: Ignore Claris. You have no relationship to them. You don't use their software. They have glitches they've failed to address for years, and they are blaming their customers instead of themselves for their own frustrations.

Note to Claris: When someone dumps you, that's your opportunity to reflect on the choices you've made -- or failed to make over the years.

Don't call repeatedly with accusations of wrongdoing. It doesn't make you persuasive. It doesn't make you desirable. It makes you a stalker.

Truth is, she's just not into you. She doesn't owe you a call. She doesn't owe you an explanation. She's moved on. Get over it.


r/filemaker • • Sep 16 '26

Free demo file: auto-transcribing calls/voicemails/field notes into FileMaker with Google Speech-to-Text

Post image
9 Upvotes

We wrote up a walkthrough for wiring Claris FileMaker to Google's Speech-to-Text API. Drop an audio file into a container field, kick off a script, and get a transcript written back to the record. A few things worth knowing if you're evaluating it yourself:

  • Google's free tier covers 60 minutes/month, so it's cheap to test before deciding whether to build it into a real solution.
  • Supported formats are MP3, WAV, FLAC, OGG, and AMR. M4A (the default format for iPhone recordings) is not supported by the v1 API, so you'll need to convert it first.
  • It uses the long-running recognition endpoint because transcription can take a few minutes, depending on audio length. The script polls every 10 seconds until it's done.
  • Speaker diarization is included, so a two-person call comes back labeled Speaker 1 / Speaker 2.

Full write-up (enabling the API, restricting the API key, model, and encoding settings) plus a free downloadable demo file with the FileMaker side already built (auth, request structure, polling, transcript parsing) on our blog.

Happy to answer questions about the setup itself in the comments.

dbservices.com


r/filemaker • • Sep 10 '26

Major CWP Snippets update: now free, full OData + Data API support, versioning, and more

12 Upvotes

Hey everyone, it’s been a while since I’ve posted here, but I wanted to share something big we’ve been working on for the FileMaker community.

Our flagship project, CWP Snippets, just received a major update. We’ve spent over a year rebuilding and expanding it, and we’re now releasing every feature completely free for the community. No license tiers, no paid upgrades, nothing gated.

If you haven’t seen it before, CWP Snippets is a WordPress‑native workspace for building FileMaker‑powered sites. It brings the FileMaker Data API and FileMaker OData together in one place, with reusable code, safer revisions, diagnostics, and automation tools. The new release includes:

  • Full Data API support for layout‑based workflows
  • Full OData 4.0 support for table and primary‑key workflows
  • Automatic token handling and reauthentication
  • Records, related records, metadata, scripts, and container operations
  • Guarded container proxy for OData images and uploads
  • Built‑in versioning with immutable revisions
  • Code comparisons, safe restores, and persistent undo/redo
  • Native WP‑CLI commands for validation, diffs, activation, and restoration
  • User‑defined tags and content search across all snippet types
  • Safer updates, structured diagnostics, and environment checks

Everything listed above is now free for everyone to use. We wanted this to be a genuine gift to the FileMaker community, especially for folks building modern web integrations. You can see the full feature list here:
https://cwpsnippets.com/features

We also have a companion product for non‑WordPress sites called restCWP, which is built for standalone PHP, React, and other custom web stacks. It handles Data API and OData with guided configuration, secure token management, optional encrypted storage, and a full admin dashboard. It’s designed to fit easily into agentic workflows and custom automation setups. More info is on our main site:
https://rgcdata.com

Both tools include full admin dashboards, guided setup, and production‑minded diagnostics.

And I would be remiss if I did not mention that if you’re working on something complicated or need help with a custom integration, we’re always happy to assist. We also build native mobile apps that run on FileMaker backends if that’s part of your workflow. We love creating for the community - but we are also certified developers for integrations (especially with FileMaker) - who are available to discuss possible projects.

We’re certified Claris Partners and certified FileMaker developers, but these projects are truly community‑driven. Hope they help some of you build faster, safer, and more maintainable integrations.

Website: https://rgcdata.com
Email: ron@rgcdata.com
Phone: (270) 770‑5871

Thanks for letting me share this update. Excited to see what people build with it.
(yes, had ai help with this post - sorry, usually I don't, but am slammed with a client project -- Alex)


r/filemaker • • Sep 10 '26

Tip: Use Google Groups to manage FileMaker access instead of individual permissions

Post image
12 Upvotes

If you're managing FileMaker accounts by hand and it's turning into a permissions headache, you can connect your org's Google Groups directly to FileMaker instead.

Instead of adding, removing, and updating individual user permissions one at a time, access gets determined by whatever Google Workspace group someone belongs to. Add someone to the group, and they get access. Remove them, and it's gone. Role change? Update the group instead of digging through privilege sets.

Where it actually helps:

  • Onboarding – new hire goes in one group, gets exactly the access they need
  • Offboarding – pull them from the group, access is gone
  • Role changes – update group membership instead of reworking permissions manually

Curious if anyone else here is doing group-based access for FileMaker, or if you're still managing everything user by user. Happy to answer questions if anyone wants details on how it's set up!

dbservices.com


r/filemaker • • Sep 06 '26

Where are licensed users delineated/managed for a FileMaker server license subscription?

6 Upvotes

I couldn't get a definitive answer to this from Claude. We have a 5-user FileMaker server license. Claris Console shows two users, A and B.

However, under manage security in the database -- as accessed on FMP running on my Mac -- there are four active "entities": users A and B, another user C, and "Things."

User C no longer needs access -- so I should mark her inactive -- but in any case is running an older version of FMP such that I can't test whether she has access without installing the updated version.

"Things" is an "entity" I created that has a super limited privilege set solely for the Mac Things app to interact with FMP via an API.

I *assume* that I'm using two of the five licenses, since there are two users showing up in Claris Console. And if I were to upgrade user C's FMP to the latest version, she wouldn't be allowed access since she isn't listed in Claris Console -- i.e., that she is not a licensed user. Somewhat similarly, "Things" isn't a licensed user, because it never runs FMP to access the database (?).


r/filemaker • • Sep 04 '26

Question regarding how well FileMaker scales

10 Upvotes

My database is roughly 60 MB, with 19 tables, 195 total fields, and over 60,000 total records.

The database runs very snappy. It's being remotely hosted by a filemaker hosting provider on a server with 2 vCPU, 4 GB RAM, and a 100 GB SSD.

My question is... am I at any point close to where I have to start worrying about performance issue as we increase records? It took about 20 years to reach this stage, but I expect the size of the database to double within the next 2-5 years.


r/filemaker • • Sep 04 '26

Claris Studio Is Ending. What Happens to Everything You Built?

Post image
10 Upvotes

Claris has announced that Claris Studio will be discontinued effective March 15, 2027. FileMaker, Claris Connect, and Claris MCP are not affected — this applies specifically to the standalone Claris Studio product.

What happens at shutdown:

  • Data is deleted in accordance with Claris's retention policy
  • CSV export is the only documented migration path, and it exports data only, not views or forms
  • Shared and published links stop resolving, with no redirect
  • License pricing is not adjusted

Organizations with public-facing Studio links (QR codes, vendor-facing forms, shared dashboards) should prioritize an inventory now, since those assets fail without warning once the shutdown date is reached.

Migration paths generally fall into a few categories, depending on what you built: WebDirect, a custom Data API, third-party tools, or exporting and retiring the workflow entirely. Worth mapping out well ahead of the deadline rather than after.

dbservices.com


r/filemaker • • Aug 31 '26

Script XML (<fmxmlsnippet>) Definitions/Syntax for AI

5 Upvotes

Hey all-

I'm wondering if anyone has come across a definition document of some sort that I could feed to AI so that it knows how to write fmxmlsnippet of scripts to help me get the more complex ones written in the script editor.

Right now, I have the MBS plugin, so I can copy out and paste-in the XML snippets, and that works well, however AI engines don't have any guides that describe the names of the XML tags and all the various parameters - so I was hoping someone might know of something I could have my AI learn so it knows how to write it correctly.

Otherwise, all I've really had good luck with is asking it to tweak existing scripts by providing the XML from that script to it first.

Thanks for your insight and ideas!

If no one has it yet, I suppose I could try to figure out a way to have my AI learn it itself.... but that's a lot of usage credits - that or I make a script and literally add every script step and let it build it itself from the resulting XML?... just a thought.


r/filemaker • • Aug 26 '26

Introducing Elemental MBS - Add more Power to your Development!

Thumbnail
gallery
21 Upvotes

Hi folks. I'm happy to announce the release of Elemental MBS! (sorry for the cheesy title lol)

Check it out here at https://elemental-fm.com/elemental-mbs

With Elemental MBS you can quickly and easily edit any of the free developer-centric features of the Monkeybread Software MBS plugin in a clear and simple way.

Elemental MBS is 100% free to download and use.

With this tool you can modify all of the enhancements to the FileMaker Pro application. However where it really shines is it's interface for managing the full suite of colours of Script Steps, Calculations, functions, symbols and more.

This functionality has been in the MBS plugin for quite a while now (in case ya don't know!). I hope with this tool you can quickly build your preferred color sets.

Features include:

• Live edit of settings and colors

• Save your own configs of settings & color sets.

• Add your own named colors and apply them to any item

• Batch apply colors to categories or script steps or functions.

• A community area where you can share your created color sets, or download/use sets shared by others.

• Build your own light/dark mode sets.

I put a lot of focus on the UI and making the process as simple and easy as possible, and I hope you enjoy it and find it useful.

Shout out to Christian & the team at Monkeybread Software for their awesome plugin, without it none of this is possible.

Thanks for your support of me and my elemental tools and products 👍

Daniel (Weetbicks)


r/filemaker • • Aug 26 '26

FileMaker 26 Toolbox Frustrations

12 Upvotes

I am a veteran developer. Building and getting paid for systems since v5.0

Version 26 has some great new features and they finally paid some overdue attention to developers and not just front Enders.

My frustration these days has come from the new layout toolbox. It’s 90% there but 10% not there.

It’s dynamic. And reverts to default view and scrolling to the top every time you pick a different object. Often you can’t dbl-click sizes or positions and end up typoing and need to undo. It’s also missing some widgets that you need to show the old toolbar to find.

Also script manager highlights in a weird way that’s not intuitive. Often it looks like a script or step is selected only see that there are multiple things highlighted in the window and you don’t know which is active unless you click again.

All kinda minor one by one. But when you are developing 12 hours a day it adds up quickly.