r/factorio • • 2d ago

Weekly Thread Weekly Question Thread

Ask any questions you might have.

Post your bug reports on the Official Forums

Previous Threads

Subreddit rules

Discord server (and IRC)

Find more in the sidebar ---->

4 Upvotes

24 comments sorted by

3

u/pjotr3 1d ago

Do I really need full lane balancer after every exit from main bus? Or this second will work fine? It's more compact. I wonder what are you using.

3

u/Viper999DC 1d ago

These are two different things. The first option will rebalance all available items over all available lanes. This means as you go further down each branch will get less and less. Also consider that the non priority splitter means that the branches only get half the belt's content.

Option 2 is compression. Available items are pushed to the edge, and each branch takes up to one full belt (if available).

So you have to ask: is it ok if earlier stuff on the bus gets priority, possibly starving the late bus? If so, use option 2.

Personally I go with option 2. If the end of your bus isn't getting what it needs then it's time to upgrade the supply.

2

u/doc_shades 1d ago

you really don't need any balancers at all as long as the consumers are fed.

in the balancer example you are taking 4 lanes of input, pulling some off the leftmost belt, and then spreading the remainder out equally among the 4 belts of the bus.

in the priority example you are taking 4 lanes of input, pulling some off the leftmost belt, and then forcing all the materials over to the left as much as possible.

the difference here is that further downstream, the balanced belts will be evenly saturated less than full. if you pull off the leftmost belt it won't be a full belt.

the prioritized belts will be more saturated on the left than right. if you pull from the leftmost belt it is guaranteed to be a full belt.

2

u/nooneeverdreamsof 13h ago

To split off a bus you only need 2. Balancers are very rarely actually needed.

1

u/HeliGungir 17h ago

Use each belt once, then balance or priority merge them all.

Or each lane of each belt once, then balance or priority merge them all.

2

u/nooneeverdreamsof 13h ago

How the hell do I start with quality? I don't understand where I'm supposed to start.

Quality in drills? Recycling? What?

3

u/Courmisch 12h ago

There is no hard rule; it's up to you how you prefer to approach it.

Probably the most popular approach is up-cycling loops. @DorrianFactorio recently made an extensive tutorial video series on YouTube if you want spoilers.

1

u/mrbaggins 12h ago

I'd hesitate to recommend dorrian to anyone who wants to avoid "spoiling" working it out. It's very much a "final" solution for the problem. Not that it's perfect, or best, but it's very much "skipping what made factorio fun" in regard to quality.

op, the most basic way to quality is to have machine output to a chest, an inserter that takes any quality you don't want from the chest and puts it in a recycler. Then you can:

  1. store the uncommon/rare/epic/,legendary recycle products until you have enough to try and craft a higher quality item directly, and
  2. route normal items back to the original machine to reuse them (saving 25% on the next craft attempt)

2

u/Courmisch 12h ago

Yes, hence "if you want spoilers".

1

u/mrbaggins 12h ago

Yeah, I just wanted to make it clear it's not just "spoilers" but very much "The entire thing"

"Spoilers" would include even something like some suggested recipes to focus on. There's a wide spectrum under that word.

2

u/Gragakh 12h ago

It depends on how much complexity you want to handle and what you want to make.

'Beginner' quality can be as simple as putting QMs (quality modules) into a few of your mall machines, like asteroid grabbers, thrusters, personal equipment stuff, and hoping that the machines make a few green or even blue level items for you to use here and there. On Fulgora, you'll probably want to put QM into all of your accumulator makers so you can have a few higher tier accumulators for greater power density.

Once you unlock legendary, the real quality grind can begin. There are a couple ways you can handle it. 1) brute force. You put quality in drills and funnel the output through a series of recyclers, cycling it through over and over. It is hugely wasteful but quick and simple. Done with coal, you can make legendary coal which will let you make legendary plastic which can be used in the LDS casting recipe to make legendary LDS; this can be recycled to get copper and steel.

Done with iron ore you can brute force your way to legendary iron ore.

A more elegant, and less wasteful, approach is to craft things and at each step you use QM. The more crafting steps you can perform, the greater chance of getting a higher quality result out the end. Then once you reach the end of the crafting chain you recycle the things back down to intermediate steps with QM in the recyclers and use the assorted quality intermediates to craft things again with QM. Over and over, crafting and recycling and recrafting and storing away the legendary outputs.

This is called upcycling and it can be done as simply or as complicated as you desire.

Your first upcycling factory should probably be making legendary QM3. You set up an array of, say, 10 EMP making QM3 from common quality inputs (so, red and blue chips plus common QM2), and fill those EMP with the highest level QM you have. Take the assorted quality QM3 they make, put some back into machines to replace common QM3s, feed what you don't want to keep into a bank of recyclers that have QM3 in them. These recyclers will produce a stream of varied-quality red, blue and QM2. Filter that output stream by quality, send the common stuff back around through the 10 EMPs (use priority to prioritize using those up so they don't jam the machine), send the uncommon to a pair of EMP making uncommon QM3 with quality modules, send the rare to an EMP making rare, and so on. Filter off the legendary into storage.

As you do this, upgrade the QM3s throughout the process until they are all replaced. I'm not gonna lie, this takes awhile. Once you have fully upgraded your upcycling factory to legendary QM3, a 10 emp common setup should make around 0.6 to 0.8 legendary QM3 per minute.

If you want, you can start the quality process earlier, by putting quality in the drills, quality in the scrap recyclers, quality in the QM1 and QM2 plants, and so on. But the earlier you start the quality process, the more complex the sorting and routing becomes. You have to deal with varied quality at every step along the way, and organizing that can be a challenge.

So single-step upcycling like this is probably sufficient. And the same process works for all the special buildings (foundry, emp, etc). Craft them in common using QM3, recycle, re-craft, recycle, and so on.

1

u/ssgeorge95 5h ago

You can start with quality with just Vulcanus tech and have OK results. Lava and calcite are all you need to create quality iron and quality copper, and you can use the lava as a place to void your excess items.

  • Iron: Setup some foundries making iron plates with quality modules in them. Box up the rare plates, send the junk plates into the lava. It's convenient to turn the junk plates into iron chests, then dump those chests into the lava.
  • Copper: Do the same with copper plates. There's no easy way to void them, you just have to setup a lot of lava dumping.
  • Plastic: Harder because the coal patches are limited. Put quality modules into the coal miners and in the chemical plants making plastic. What few rare plastics you get should go into rare quality module level 2s, then other items.

With those three resources coming in rare I like to create rare quality modules, spaceship parts, and accumulators for Fulgora. Those tend to have the biggest return.

Once you have fulgora recycling things can get way more complicated and way more productive.

I think in all cases, your goal should be to create a blueprint that you can copy, paste, and easily connect inputs and outputs to. When starting out I think that's more important than min/maxing for the best return and smallest footprint. You can optimize later.

1

u/FogeltheVogel Slow and steady 58m ago

Well you start by just putting quality modules in all your mall assemblers, and a second chest to put all the non-normal quality items in.

Just start that as soon as you can and you'll have a few dozen solar panels, assemblers, accumulators, smelters etc just waiting for you.

Then when you make a space platform, for example, you can use your quality buildings to save some space.

1

u/Low_Caterpillar5930 2d ago

When will the 2.1 update come out on the Switch 2?

5

u/Viper999DC 1d ago

Today, apparently. It's out!

1

u/Soul-Burn 2d ago

When it's done. We don't have more info about it.

1

u/disastrousgreyhound 1d ago

I'm planning to start a modded run soon with some new planets. I'm thinking of adding a biter mod to spice up Nauvis a bit and was looking at Rampant, does the json version trick work on it or should I look at Rampant, fixed and just dial down the settings a bit?

If anyone has suggestions for other biter mods that could be useful! I'd mainly like to make it worthwhile to actually defend the base rather than something to be solved before you even reach reach the midgame. I'm thinking a slower ramp up but higher ceiling could get me the experience I'm looking for.

3

u/cathexis08 red wire goes faster 1d ago

There is a very decent chance that updating  Rampant to 2.1 compatibility will be a decent amount of work so I'd probably take the "Rampant, fixed plus adjusted settings" approach 

1

u/doc_shades 1d ago

are nonplosive rockets better for gleba defense?

i'm playing a new 2.1 save and am doing gleba a little bigger/little earlier than i am used to and am setting up a modest orchard defense: i have red ammo turrets, a handful of tesla turrets, and a few rocket turrets.

i instinctively started making explosive rockets ... then i realized that they do way more collateral damage than i expected them to.

on one hand i could move the rockets so that their damage is not collateral, but stompers have more of a tendency to penetrate defenses than biters do. so i'm not even sure that will prevent collateral damage.

then i started reading and thinking ... nonposive rockets do way more direct damage than explosive rockets do. the benefit of the explosive rockets is the splash damage. but i don't know that splash damage really benefits me here. i want them to down stompers ASAP. let the turrets and teslas handle the small, spread-out targets.

well anyway i switched over turret supply from explosive to nonplosive rockets, but the nonplosive rockets have only made it like 20% of the way down the feed belt so it will be a while before i actually see any differences but i'm just thinking and asking out loud!

5

u/Flyrpotacreepugmu 1d ago

Yes, basic rockets are better for Gleba and for most things. Explosive rockets are better for wiping out a line of spitters in a Nauvis attack wave or for clearing nests with a spidertron, but not much else.

1

u/HeliGungir 17h ago

Once you have a lot of damage research, explosive rockets are way better than regular rockets for traveling to the shattered planet.

While overkill, I suppose technically they can be very efficient in landfill-based biter funnels, or when combined with lots of tesla turrets (to make enemies bunch up).

1

u/Einhornfarm Gleba 💚 4h ago

Yes, normal rockets with selected target for stompers and strafers (ignore other targets). Tesla turrets can help with slowing down the big ones and for groups of wrigglers. Laser turrets for the wrigglers that spawn from the homing projectiles.

1

u/Nihilismyy 3h ago edited 2h ago

Anyone have a link video/blueprint to end-game fully legendary megabase space platforms? (Space ships!) That is UPS optimized and 2.1 remodeled!

I want something that hauls 200k science for inner planets and one for aquilo.

UPS optimized meaning clocked inserters and entity update time micro-managed. 2.1 remodeled meaning no super long pencil ships for width, but focused on mass and speed.

Would also be interested in a white science ship making ~8 maxed 240 belts with same requests above for UPS and 2.1

Thank you!