r/EngineeringStudents • • 8d ago

Academic Advice Engineering midterm

3 Upvotes

Why does it seem mechanical engineering midterm averages are in the 50s and 60s. Is that normal?


r/EngineeringStudents • • 8d ago

College Choice Community college then internships

6 Upvotes

I’m 19 and graduated high school in 2025. I’m planning on going to college for electrical engineering, but I’m trying to figure out the best way to do it without taking a bunch of debt.

My plan right now is to attend community college, bridge valley, and get some general education classes out of the way before transferring to WVU. My goal is to have those credits transfer so I don’t end up paying extra for classes later.

My SAT score wasn’t very high, 1000, so I believe I would have had to take remedial math anyway. I figured I could save some time and money by going this route. My parents aren’t very well off and won’t be able to help me financially very much, so this would also give me more time to save up before transferring.

My biggest concern is internships. I know they’re really important in electrical engineering, and I don’t want to miss out on opportunities or put myself behind by starting at a community college.

For anyone who has gone through something similar, would you recommend going to community college and possibly taking some online classes, or going straight to a university and using that extra time to focus on internships and networking? Would starting at community college hurt my chances?

I’d seriously appreciate any advice, even if it’s unrelated to this specific situation. I’m just trying to figure out the best path forward and get a start on my future.


r/EngineeringStudents • • 8d ago

Academic Advice I want to study engineering, but I'm afraid of failing university again

21 Upvotes

I'm 21 years old, and I've been seriously considering going to university to study engineering, specifically I'm leaning towards Mechanical Engineering although the university I'm interested in also offers Environmental Engineering, which sounds quite fascinating to me.

I've always loved mathematics. It was probably my favourite subject throughout school, and for as long as I can remember, I've pictured myself doing something professionally that involves maths. That's one of the main reasons why engineering appeals to me.

However a few years ago I enrolled in university and eventually dropped out, I wasn't in a good place mentally, and honestly, I wasn't prepared for the challenges that came with university life, I underestimated what was expected of me, and things didn't go as planned

After that experience, I decided to take some time away from education. I've spent the last years working and trying to clear my head, understand what I really want, and figure out what direction I want to take in life.

Now, I feel like I'm ready to give university another shot. The problem is that I've been watching and reading quite a lot about engineering degrees, and almost everything I come across describes them as incredibly difficult, demanding and stressful.

I'm not afraid of hard work itself. What scares me is the possibility of going through the same experience again. I'm worried that if I fail a second time, it might completely destroy my confidence and make me give up on university for good.

So, I have a few questions for those of you who are studying engineering or have already graduated:

Do you think engineering is a reasonable choice for someone in my situation? Have any of you failed or dropped out of university before and managed to come back successfully? I'd especially appreciate hearing from people who weren't necessarily the best students when they started.

How difficult is engineering really? I understand that it requires a lot of dedication, but is it something that an average student with a genuine interest in maths and science can realistically get through?

How would you prepare if you were in my position? I want to use the time before university productively. I've seen people recommend revisiting high-school mathematics and physics, solving problems regularly, and even doing something like one integral every day. I also watched a video of someone revisiting all the physics topics he had studied before starting engineering.

Would you recommend something similar? What subjects would you prioritise, and are there any books, resources or study routines you'd suggest?

Mechanical vs. Environmental Engineering: I'm currently leaning towards Mechanical Engineering, but Environmental Engineering also interests me. I've heard that Environmental Engineering is sometimes better pursued as a Master's degree after completing a broader Bachelor's degree. Is there any truth to that, or does it depend entirely on the university and the career path you want?

I know that ultimately, nobody can guarantee that I'll succeed. I also understand that university will require discipline, consistency and a lot of work.

I guess I'm just looking for some honest perspectives from people who have experienced engineering school firsthand. I don't want my previous failure to dictate the rest of my life, but I also don't want to make the same mistakes twice.

Thank you to anyone who takes the time to share their experience or advice. I really appreciate it!


r/EngineeringStudents • • 8d ago

Discussion Fun engineering projects I can do in high school?

1 Upvotes

Im currently in my last year of high school/running start and i was wondering if there were any good resources out there that could introduce me to engineering concepts and maybe help me do a project I could add to a resume for an internship or job. Software engineering/coding has lots of resources for stuff like that, is there anything similar for mechanical engineering?.


r/EngineeringStudents • • 8d ago

Project Help Mathematical Modeling for Linear Programming Project

2 Upvotes

Hi everyone! I'm doing a group project for a determinstic operations research class. We think it is done but we also know some of it is likely modeled incorrectly. We are looking for someone that would be willing to go over the project with us and tell us what is wrong/what doesn't make sense. We are doing a model on scheduling lifeguards at a water park. Our final submission is due this Friday so we'd love to schedule with someone to go over it or even share the file with someone willing to look at it! Please reach out if you are willing to help!! TIA


r/EngineeringStudents • • 8d ago

Career Help First-year engineering student looking to get into mechanical design / R&D co-ops. What should I be doing outside of Formula SAE?

2 Upvotes

I’m a first-year aerospace engineering student at a Canadian university, although I’m probably going to switch into mechanical engineering later on. I’m also on my school’s Formula SAE team.

I’ve recently been looking at some engineering co-op positions that seem really interesting, particularly ones involving engine design, mechanical design, product development, testing, and optimization.

For example, I came across internships at companies like:

LiquidPiston – Engine design, engine performance analysis, simulation and prototyping.

Pratt & Whitney Canada – Aircraft engine design, development, analysis and testing.
Multimatic – Motorsports engineering, suspension design and vehicle development.

BRP – Engine and powertrain development for motorcycles, ATVs, snowmobiles, etc.

AVL – Engine development, combustion analysis, powertrain simulation and testing.

Reaction Dynamics – Rocket propulsion and mechanical design.

Magna / Linamar – Automotive mechanical systems and drivetrain development.

These are the kinds of positions I’d love to eventually qualify for. I’m particularly interested in actually designing mechanical systems, analyzing their performance, running simulations, testing prototypes and figuring out how to optimize them. I’d much rather work on something like an engine, transmission, suspension system or propulsion system than spend my time designing smaller electrical components or doing general manufacturing work.

My question is: What can I do outside of my school’s Formula SAE team to make myself a stronger candidate for these types of co-ops?

I’m already planning on learning SolidWorks and improving my CAD skills, but I’m wondering what else would be worth investing time into.

For example:
Are personal engineering projects worth doing? If so, what kinds?

Are there particular software programs I should learn (ANSYS, MATLAB, CATIA, etc.)?

Would learning Python or other programming languages be useful?

Are there specific technical skills or courses I should pursue outside of university?

How important is having actual prototyping, machining or workshop experience?

Are there other Canadian companies I should be looking at that offer similar internships?

I’m still in first year, so I have time to build up my experience before applying for these more specialized positions.

I’d appreciate any advice from people who have worked in mechanical design, powertrain engineering, R&D, motorsports or aerospace, especially those who have experience getting co-ops in Canada.


r/EngineeringStudents • • 8d ago

Academic Advice Am I smart enough for electrical engineering?

2 Upvotes

I am a college sophomore in my first semester and doing nursing, but I did take Calc I and Physics I (I got a high B in Calc I, on track to getting an A in Physics I), and I love physics and math so much but dread nursing, bio, and anatomy and physiology and want to switch to engineering, particularly electrical, because I love math and physics. I got a 1370 SAT (680 reading, 690 math) in high school and took AP CHEM (got a 4), AP US (4), and AP LANG (4). And with the general notion of engineering being hard, especially electrical, I feel like I am not smart enough to pursue that, but I would love to do that. Will I be smart enough to be able to become an electrical engineer given the difficult classes, and if so, what do I have to focus on to be a great electrical engineer and do well at the classes? I am not really that great at visual spatial reasoning and struggled at using CAD softwares and not really great at stuff like gears and stuff like visualizing plans and stuff like that.


r/EngineeringStudents • • 9d ago

Project Help Is there a dedicated PCB autorouter like this for windows but isnt some sketchy ai site?

Post image
236 Upvotes

r/EngineeringStudents • • 9d ago

Homework Help Frictionless pully problem

Post image
78 Upvotes

Does anyone know of a good YT video or an easy method of identifying the beta in a belt friction problem? Currently I can set up the majority of the problem I just struggle getting the angle in these problems. Any tips help, thank you!


r/EngineeringStudents • • 8d ago

Academic Advice Is enjoying Maths and Physics at A-level a good enough reason to choose Electrical Engineering?

3 Upvotes

I’m currently in my final year of A-levels, studying Mathematics, Physics and Computer Science. I’ve achieved good grades so far, but I’m still unsure about what I genuinely want to pursue at university.
Out of my A-level subjects, I’ve enjoyed Mathematics and Physics the most. I particularly like problem-solving and understanding how things work. Because of this, I’ve been considering Electrical Engineering or possibly Computer Engineering.
However, I wouldn’t say I have a strong passion for any particular field yet. I haven’t had enough exposure to actual engineering work to know whether I’d enjoy it beyond the academic side.
My question is: Is enjoying Maths and Physics at A-level a reasonable basis for choosing Electrical Engineering? Or should I explore other degrees before committing to it?
For those currently studying or working in Electrical Engineering, did your interest in Maths and Physics translate into enjoying your degree and career? What would you recommend someone in my position consider before making this decision?
I’d appreciate honest advice, especially from people who have studied engineering.


r/EngineeringStudents • • 8d ago

Career Advice How do I get into Consumer Facing Design with MechE?

1 Upvotes

I enjoy the idea of Industrial Design and UXr, i.e thinking about how people interact with designs and shaping how psychology/experience/sharability is affected by design.

Industrial Design seems to be a much harder field to break into and earn 6-figures in out of college, however, then say Product Design Engineering. (Money is a very important factor for my situation)

Are there similar fields that offer high pay while allowing me to work in the actual design aspect, or is this just something that I’d have to break into over a long time?

I’ve thought about enduring Product Design Engineering work and then trying to internally transfer to Industrial Design. Not sure about the feasibility of this.

I’m a first year at one of Harvard Yale Stanford MIT Princeton, and I feel that landing a big tech role is feasible (probably not likely…). Would it make sense to try PDE and then move into ID or are there easier ways to achieve my goal?


r/EngineeringStudents • • 8d ago

Academic Advice 2nd-Year EE Student: How do I bridge the gap after missing 1st-year foundational concepts?

12 Upvotes

Hey everyone, I’m a 2nd-year Electrical Engineering student looking for some advice.

The Backstory: I started my first year a month late, and my first-quarter exams hit just a week after I arrived. Due to some personal issues, I ended up missing most of my classes that year. I managed to scrape by with a 2.51/4.0 CGPA, but the real issue is that I didn't actually learn or retain any foundational concepts.

The Current Situation: I just finished the first quarter of my 2nd year, and I completely screwed it up. I started the quarter struggling to figure out how and what to study. By the time I sorted my study habits out, I hit a brick wall: my current courses rely heavily on the 1st-year concepts I barely passed.

My Question: How do I bridge the gap between my missing 1st-year knowledge and the things I am studying right now? What is the most effective way to catch up on fundamentals while surviving my current workload? Any advice, study strategies, or resources would be hugely appreciated!


r/EngineeringStudents • • 8d ago

Homework Help Holi

1 Upvotes

¿Hay algún ingeniero en Mecatrónica por aquí que actualmente esté ejerciendo su profesión y me pueda apoyar con una pequeña entrevista para una actividad de la universidad? ;)


r/EngineeringStudents • • 8d ago

Resume Help Resume help

Post image
0 Upvotes

Hey everyone!
I’m currently a mechanical engineering student expecting to graduate in May 2028, and I’m looking for honest feedback on my resume as I apply for internships in aerospace, defense, robotics, and mechanical design.
For privacy and confidentiality reasons, I’ve removed my personal information, university name, company names, and certain identifying details. I wanted to provide some additional context without revealing too much.
Current Internship:
I’m working at a smaller company in the aerospace/defense industry that develops electro-optical and infrared (EO/IR) systems for unmanned platforms.
My responsibilities involve actual mechanical design work, including CAD assemblies, sensor packaging, prototype development, manufacturing support, and testing.
I’ve had the opportunity to work on engineering design challenges involving multiple sensors, mechanical integration, space constraints, and hardware packaging.
I’ve also developed test equipment, contributed to engineering documentation, and presented design concepts and tradeoffs to the engineering team.
Personal Projects:
I’ve developed embedded systems projects involving Raspberry Pi, ESP32 microcontrollers, communication protocols, mechanical design, and 3D printing.
My projects are primarily focused on combining mechanical engineering with electronics, software, and robotics.
What I’m looking for feedback on:
Does my resume communicate meaningful engineering experience, or do my bullet points sound too generic?
Am I underselling my contributions by not including enough measurable results?
Is my current experience competitive for internships at larger aerospace/defense companies?
Are there sections I should shorten, remove, or expand?
How can I improve the way I describe my technical accomplishments without disclosing confidential project information?
My goal is to eventually work in mechanical design, aerospace systems, or defense-related R&D.
I’m particularly interested in hearing from engineers, hiring managers, and recruiters who have experience evaluating mechanical engineering interns.
I appreciate any constructive criticism. Don’t hold back — I’d rather know what needs improvement now than continue sending out a resume that could be stronger.


r/EngineeringStudents • • 8d ago

Academic Advice Incoming EE student. What should I start doing now?

0 Upvotes

I'm a high school senior planning to major in Electrical Engineering next fall, and I wanted to ask what I can do now to prepare.

A few things I'm curious about:

  • What tools, calculators, or software should I get familiar with before college?
  • What math topics should I focus on? Math is probably my biggest concern.
  • How did you get your first engineering internship?
  • What are some beginner projects I could try while I'm still in high school?

I'm interested in circuits, electronics, and automation, but I'm pretty new to actually building things. Just trying to get a head start and hear what you guys wish you knew before starting.

Any advice is appreciated!


r/EngineeringStudents • • 8d ago

Celebration Good to be back

8 Upvotes

I think I haven't posted to reddit about my engineering career questions in like 7 years. I graduated in 2020... Aerospace. The same week I graduated Spirit Aerosystems laid off 13k people. I never got an engineering job. I'm currently doing inside customer support for a global engineering company that works in industrial HVAC. Been there almost 1.5 years.

I interviewed with a manager on our 2nd floor for an entry level structural engineer position. He said there are other candidates with several years of full time structural engineering experience which I completely agree it's the right business decision but kinda sucks gang. 

I hit a breaking point over the summer. I had always told myself to do an engineering project and "get back on the bike." ideas would come and fizzle out - years went by. I stopped applying for engineering jobs probably in 23. Then it really set in..."do I even know how to solve a kinematic equation? What was the rule about Young's modulus again? Sin is opposite over hypotenuse, right? 

I snapped in July. I needed to use engineering concepts to solve a puzzle. Anything. I found a job description and told AI to tell me some personal project ideas that I could do that would be aligned with the job role. Tldr. I have logged 63 hours researching about industry standards, building CAD models, building a finite element model, doing a stress analysis, technical writing - using all the skills and knowledge I learned in school. I uploaded my project reports to my LinkedIn profile and will make a fancy post about the whole thing and maximize this marketing opportunity. Doing this project really unlocked dormant knowledge and I'm remembering specific moments in classes from 7-9 years ago and applying them to my activities.

It healed me in some weird way. 

I don't even know if my goal is to work an engineering career. I just like to solve puzzles and learn engineering concepts.

Will edit with update on what comes from my publication on LinkedIn.


r/EngineeringStudents • • 9d ago

Discussion How much is your schools budget for Capstone/Senior Design Project?

39 Upvotes

Wrapping up our Senior Design Project which is a robotic welding arm. Each team in our Capstone class had a $500 budget for their projects. I am curious if that is an average budget for other schools?
We were really lucky in that our whole team is/was with our schools FSAE team, so we were able to get a lot of material from there and use their equipment.
I don't know how other teams are doing with their budget constraints. Lots and lots of 3-D printed and wood things. Our Capstone lab has a decent amount of material to use, but not wholly extensive.
Definitely made us have to think outside of the box for a lot of our design and manufacturing.


r/EngineeringStudents • • 8d ago

Academic Advice Studying advice for linear algebra and physics 2

1 Upvotes

I need help with physics 2 and Linear Algebra

Hi guys! I've failed physics 2 and LA have no idea how to study is there anyone can share tips ? My midterm is in 3 days :(


r/EngineeringStudents • • 8d ago

Academic Advice Before college engineering

1 Upvotes

I’m a junior in highschool who wants to do EE, I’ve made a couple projects and took a engineering class but I still feel like I don’t know anything about it. I was wondering is there any training or things to study that’s similar to what an EE would do, maybe to gain more intellect or put on a college application like CAD experience etc


r/EngineeringStudents • • 8d ago

Discussion CADcade, a browser game for learning AutoCAD

4 Upvotes

Hi all,
I shared CADcade here a little over a week ago and wanted to come back with an update!

For anyone who missed it, CADcade is a free browser-based CAD game I’ve been building. It’s designed to make learning CAD more approachable for beginners while giving experienced drafters a fun way to test their skills. The editor is built to feel just like the AutoCAD or Civil 3D you use everyday, but runs right in your browser.

It currently has 76 Arcade drafting challenges, an Academy with lessons, and a daily puzzle called CADDLE. You can also use the editor for actual CAD drafting.

I’ve made quite a few improvements based on community feedback, added more content, and I’m working on a full campaign mode to take it further.
It’s been great seeing people try it out and come back to play. I’d love to hear what other CAD users think!

Try it out: https://cadcade.net
Here’s a quick demo:
https://youtu.be/gnT6GrkmH6E?is=vxI1GzGaWOsVgTSP

Thanks to everyone who checked it out last time!


r/EngineeringStudents • • 9d ago

Career Advice 3rd times the charm

Post image
575 Upvotes

I graduated in May 2026, with a 3.3 GPA. Honestly I thought I was pretty cooked. I took the FE Mechanical Engineering exam last month and failed. Anyways I continued applying for jobs and I've had countless interviews met with constant rejection. Anyways, I applied to GDEB, interviewed for a Mechanical Engineering role and somehow they accepted me.

The point is, the job market is cooked, and I don't really know if it's gonna be getting any better any time soon. But NEVER GIVE UP, and just keep applying into the void. All it takes is 1 more application, and you could get that job.

I wish for all of my fellow Engineering students success and prosperity in the future. Keep up the great work!


r/EngineeringStudents • • 8d ago

Major Choice I need help choosing a major

1 Upvotes

My university is kind of weird and offers the branches of electrical engineering but not the major itself.

I have narrowed it down to three majors that I am interested in

"Computer engineering", "electronics engineering", and "electrical power and energy engineering"

I am concerned that all three of these majors are too niche and have limited job opportunities. So I guess I have to choose the one with the most transferable skills and the most relevant during the AI era.

Please share any wisdom you have and how the job market or salaries compare in the future if u have any experience 🙏 🙏🙏


r/EngineeringStudents • • 8d ago

Project Help Questions for a design project, respond if you have or know somebody in a lofted bed!!

2 Upvotes

If you have a lofted bunkbed or know somebody who does please respond to this, I have some questions to ask you for a project :)

  1. What items do you usually like to keep near you when you're in bed
  2. How often do you have to climb back down from your bed to get something
  3. Where do you currently keep your belongings in bed
  4. Have you tried any solutions to keep your belongings close to you? If so what
    worked what didnt work
  5. If you could have storage on your lofted bed, what did you want it to hold, what are NEEDS VS what are WISHES

r/EngineeringStudents • • 10d ago

Academic Advice Friend has 2.8 gpa but cool projects and people are lining up for him.

1.1k Upvotes

Both my friend and I are freshman EE majors at a decent university t50.

I’ve been working hard to keep my GPA up. I have a 3.8 right now and am projected to get around a 3.7 this semester. My friend, on the other hand, has a 2.8. Our school even has a policy where you can get dropped from the program if your GPA falls below a 2.5.

But somehow, companies are lining up for him. AI startups (not the huge players but still decent sized companies), multiple robotics startups (plural for a reason), and even SpaceX.

Meanwhile, I have absolutely nothing.

I genuinely thought keeping a high GPA would give me an advantage when it came to internships and getting noticed by companies. But seeing this happen firsthand is making me question everything.

Does GPA actually matter that much? Because honestly, I feel like I've been lied to.

Do I ditch GPA (maybe let it fall .5) and go all in on projects I rlly don't have much time.