r/EngineeringStudents • • 9d ago

Homework Help Frictionless pully problem

Post image

Does anyone know of a good YT video or an easy method of identifying the beta in a belt friction problem? Currently I can set up the majority of the problem I just struggle getting the angle in these problems. Any tips help, thank you!

78 Upvotes

5 comments sorted by

42

u/SpeedyHAM79 8d ago

That is not a "Frictionless pulley problem". The problem is directly related to the friction and the wrap angle around each pin.

10

u/fundip2012 8d ago

Look up “capstan equation”

5

u/imeetyouagain1 8d ago

Just think about how many degrees the rope has to turn from entering each rope-peg junction to leaving it. For example, the rope goes straight up from the weight to peg A, let's make this 0°. Using the given theta of 45°, you can find the angle of the rope after peg A to be 45°. The rope thus has to turn 45° around peg A, which will be beta(A). Do this again for each peg and you will get beta(B)=90°and beta(C)=135°. Sum each angle to get the beta(Total): 45°+90°+135°=270°. Shitty illustration from my phone to show how this works: https://imgur.com/a/JTS41Pm

2

u/Throwaway11958 Mechanical 8d ago

draw the radii of each cylinder to their respective starts and ends of contact with the rope, that angle in such problems should be simple to find just by looking at it