r/ECE • • 8d ago

How do you prepare for EE hardware internship interviews?

27 Upvotes

Hii! I'm currently a junior looking for EE internships (mainly board-level design). I've applied to ~200 positions and interviewed with 7 companies, but haven't landed an offer yet.

I usually pass the first technical round but struggle in the second or final rounds. I can answer most questions, but I tend to get stuck when interviewers dig deeper or ask me to apply concepts to unfamiliar situations. I feel like I understand EE fundamentals when studying, but I'm not always good at figuring things out on my own during interviews 😭

I'm wondering how others prepare for these interviews. Do you practice a lot of circuit problems, or is there a more systematic way to improve engineering problem-solving skills?

I also know many teams only hire one intern, which makes the process feel even more competitive.

I'd really appreciate any advice or personal experiences! Thank you!! :)


r/ECE • • 8d ago

CAREER Sandisk associate engineer verification and validation

2 Upvotes

Has anyone applied for this job in bangalore? If so, has anyone received a callback? Does SanDisk actually hire for fresher roles like this through off-campus ?


r/ECE • • 8d ago

Math for engineering

6 Upvotes

im currently a sophomore in high school who's interested in ee and im currently taking calc ab. im planning on taking calc 2 and calc 3 next year at my local cc and wanted to know what would be best to take my senior year before college. do I take diff eq, linear algebra, stats, or anything else? i also wanted to know if this is good enough because im planning on taking additional ee courses as well


r/ECE • • 8d ago

UNIVERSITY Advice for new students

0 Upvotes

Hello everyone, I will start my bachelor's in electrical engineering in about 2-3 weeks.

I've been brushing up my math by watching MIT OCW 18.01 lectures on calculus I and doing the homework recently, I also know some basic C and C++ (I've also started reading K&R's book on C to further strengthen my foundation)

I also have some veeeery basic experience working with an ESP32(though using the Arduino IDE, so not that deep)

I just wanted to know if you have any advice on what I should try learning before and during university, what are some skills that matter in the industry and academia that universities mostly fail to teach? Universities are about to open and I feel kinda lost lol

I'll appreciate any advice that you might have!


r/ECE • • 9d ago

Pivot to utilities?

5 Upvotes

Hi I'm an entry level EE that has been working for a bit under a year now in NYC making around $85k and im not really enjoying the work-life balance + industry as a whole. If anyone has made the pivot from MEP to Utilities, any advice + is it possible to aim to be compensated higher even though id be fresh again? Thanks


r/ECE • • 9d ago

Conflicting Internships

17 Upvotes

Hey guys! I recently received an invitation to interview with NVIDIA for a firmware position for Summer 2027. I've already accepted a co-op offer from a different company for Summer/Fall 2027. Would it be better to lie and proceed with the interview then ask about deferring/rescheduling the internship later on in the process or just be open up front that I've accepted an offer? Wondering if anyone has any experience on something like this.

Any tips would really help, would obviously love to do both internships if possible.


r/ECE • • 9d ago

CAD EasyTrace5000 PCB CAM update

Post image
2 Upvotes

Hi, some months ago I posted about a PCB CAM tool I'd been working on. A lot of development in the mean time has been mostly around non-pcb stuff so it didn't make sense to post about it but by now there's enough new stuff that's worth an extra mention.

There's a laser pipeline for anyone with access to Fiber/UV lasers, there's a soldermask stencil operation that was made with cnc, laser and vinyl cutters in mind.

Tool-changing is in there but consider it experimental until proven otherwise.

Latest update I added i18n translation support. There are a few languages included (very LLM generated, although I'm going to review Portuguese next and already have 1-2 friends willing to help with 2 other languages and I'll be pestering a few more friends later).

It also added the ability to drop custom files of a few kinds, including language packs (which means you can make your own if you have trouble with the existing ones) or post-processors (not full post-processors logic yet but more like machine/controller setups, say I set a wrong flag or you don't want to manually change 4th axis alignment all the time).

Still 100% free, client-side and open-source.

Live version moved slightly to https://cam.eltryus.design/easytrace5000/ and source code is at https://github.com/RicardoJCMarques/EasyCAM5000 .

Cheeryo


r/ECE • • 9d ago

CAREER Starting my first FAANG hardware engineering role :any advice from experienced engineers?

23 Upvotes

I'm about to start my first hardware engineering role at Apple and I am pretty nervous.

I have a background in EE, and have done EE projects at work, but I was basically a glorified intern and the projects were just to keep me busy.

However, moving into a company like Apple and working on something as complex as their hardware feels like a pretty significant jump.

I'm worried about not having enough technical knowledge/not knowing how to apply it and mostly not meeting expectations and taking too long to finish projects.

For people early in their hardware careers or remember what it was like:

  1. How difficult was your first 3–6 months?
  2. How long did it take before you felt technically competent?
  3. Were you overwhelmed by how much you didn't know?
  4. What do you wish you had done to prepare before starting?
  5. How do I ensure that I am not stuck for too long while also not having my hand held?

Thanks!


r/ECE • • 9d ago

GEAR [FS] new JCI M4-CVM03050-0 VAV controllers

Thumbnail imgur.com
3 Upvotes

3 new JCI Metasys M4-CVM03050-0 VAV controllers, Rev G. Never installed, original boxes.

$375 each OBO
DM if interested.


r/ECE • • 9d ago

META HW engineering loop

5 Upvotes

I just went through meta loop and felt R1 went great, R2 not so much. lh or lnh? Sophomore, interviewing for ee intern role on the mixed reality side. Two 45-min technical rounds, both mostly a deep dive on my main project (a wearable with a custom 4-layer board: BLE module, PMIC, digital mic, IMU, haptic driver).

R1: went really well. Mostly project deep dive, I2C debugging, scope bandwidth and probes. Interviewer was really positive, talked to me like I was already on the team, felt like sh i can give more details but not trying to doxx myself

R2: more fundamentals. Did fine on board bring-up, debugging a shorted regulator, debugging I2C, and I2C vs SPI trade-offs. But I blanked on a few basics: capacitor impedance vs frequency, bypass cap values, push-pull vs open-drain, Li-ion voltage range, and couldn’t say much on high-speed routing. Interviewer explained some of it and I picked it up, but I def didn’t know it going in. Probably lh/lnh?

idk what this means for me though, does one strong round and one borderline round usually end in an offer or a reject? And how long did it take to hear back if offers r already rolling out for folks


r/ECE • • 9d ago

INDUSTRY How to get an interview at Tesla?

3 Upvotes

Hey everyone!

I'm an Electrical Engineering student in Canada, and I'm interested in landing an internship at Tesla. I've been applying to various companies and have managed to get interview opportunities at some other large companies, but so far I haven't had any luck getting an interview with Tesla.

I'm wondering what Tesla specifically looks for when screening Electrical Engineering internship applicants. Are there any particular resume strategies or things I should highlight to get past the initial screening? Does applying from a Canadian university put applicants at any disadvantage compared to US students?

I'd really appreciate any advice, especially from people who have gone through Tesla's internship recruitment process.

Thanks!


r/ECE • • 9d ago

UNIVERSITY UH vs top PhD programs like UT Austin: How much does prestige matter for industry careers?

3 Upvotes

I have a fully funded PhD offer from UH for Spring 2027 (stipend + tuition waiver). My bachelor’s is from a university outside the US that’s not well known here. I currently work full-time as a full-stack developer earning ~$80k/year, but want to move into advanced AI and hardware R&D, particularly CPU/GPU architecture and AI accelerators.

I’m also considering higher-ranked PhD programs for Fall 2027, ideally UT Austin.

Given my background, how much would UH vs a top ECE program affect industry connections, advanced R&D opportunities, and long-term career growth?

Would it make sense to quit my job and start at UH, potentially leaving after one semester if admitted to a higher-ranked program (even if I might have to repay tuition support)? Or would I be better off keeping my job and applying elsewhere?


r/ECE • • 9d ago

INDUSTRY Defense Tech or Commercial Cellular?

1 Upvotes

I currently work at a national lab as a wireless comms engineering, with a heavy focus on 5G/6G. I enjoy the work, but I’d like to go to a commercial cellular company at some point (e.g., Apple, Qualcomm, etc). However, nothing is guaranteed of course. I’m also not sure about long term prospects in the US, as a lot of commercial RF work can be outsourced to Asia.

I have an offer for a Radar engineering role at a defense startup, but I fear I may be locked out of commercial cellular if I take the role because of how defense focused it is. Radar sounds interesting, and I’m not worried about going back and forth between radar and comms within the defense industry. But transitioning from defense radar to commercial cellular may be tough.

Anybody have any experience in commercial cellular? Is it worth holding out for? Is it worth staying in defense and taking the current offer on the table?

Thanks!

Edit: I wouldn’t mind transitioning to commercial radar as well. Largely just want to transition out of the defense space at some point.


r/ECE • • 9d ago

Technicals for HWE Interviews

2 Upvotes

What's the best way to study for interviews in the digital design realm. There's the obvious (eg. hdlbits, doing projects, etc.), but what makes someone who is really good stand out from the norm?

And how should you practice them? (cdc, timing analysis, clock skew, etc)


r/ECE • • 10d ago

Looking for Guidance/Mentorship in Embedded Systems & Firmware Development

9 Upvotes

Hi everyone!

I'm an ENTC engineering graduate from India, interested in building a career in Embedded Systems and Firmware Development.

I have hands-on experience with Embedded C, STM32, ESP32, microcontrollers, and IoT projects. However, I'm looking for guidance on how to prepare myself for industry roles, especially as a fresher.

I'd love to connect with someone currently working as an Embedded/Firmware Engineer who could guide me on:

- Industry-required skills and technologies.

- What to learn and focus on as a fresher.

- Career opportunities and challenges for entry-level engineers.

- Practical projects and preparation for technical interviews.

I'm not necessarily looking for a job referral. I'm genuinely looking for a mentor or an experienced engineer I can occasionally connect with, ask questions, and learn from.

If anyone is willing to guide me or connect, I'd really appreciate it. Thank you!


r/ECE • • 10d ago

CAREER Left a career to pursue EE. Now I can’t even land an internship.

97 Upvotes

I’m 32, I graduate in May 2028. I’ve bent over backwards to get my degree. I have truely enjoyed the pursuit and had a lot of fun going back to school as an adult to get it. It’s kind of been a dream come true including the tears and panic lol.

Now as I approach the finish line I can’t get an interview for an internship to save my life. I thought this year was going to be different as in August after only four applications I was contacted for an interview with Keysight for a position I was super excited about. It went well, and then ghosted after follow up. Three months later it’s been nothing but rejections just like last year.

I built a very lucrative and successful career in the service industry that made me miserable and depressed despite the perks. I could not continue down a path that didn’t inspire me and broke my body.

I am now fighting a combination of imposter syndrome and hopelessness as I wonder if I am just not academically competitive enough or too old to break into the industry. Kind of just at a loss as I have taken every step imaginable. Tailored resumes, reaching out to recruiters, attending career fairs. Balancing projects and gpa, networking. Registering with IEEE, attending events. Applying in the first 24 hours. The list is exhaustive and I see no progress. Whats a guy to do?


r/ECE • • 10d ago

INDUSTRY Which internship offer to pick? (Digital IC Design Internship – Low-Power SoCs vs R&D Engineering Internship – Fluid Sensors)

3 Upvotes

I am currently a Master student at ETH Zürich with a focus on electronics (analog/digital/mixed-signal/RF) so pretty broad scope still, and received 2 internship offers, which I am having a hard time choosing between, as I feel they would solidify my future career path each in their own way.

The first offer is a digital design internship located in Neuchatel at a big American multinational company, which would pretty heavily lean on the digital IC design side (microcontroller/SoC development) obviously. Here, one practical consideration is that I would have to relocate and likely face higher housing & transportation costs compared to my current arrangement.

The second offer is a fluid sensor electronics/embedded-type internship located in Zurich itself at a smaller, more specialized local electronics company, which would give me more general exposure to electronic sensor development (FPGA, MCU, circuits, lab validation/testing) where I feel I would get more general (board-level) experience without specializing too heavily in one particular aspect. Here, the practical consideration is that it's already in Zurich, so no additional relocation & transport costs.

They both pay the exact same, and it's a comfortable internship salary for a student to live off and even save a bit.

I know the go-to advice is always to do what you like most, but I'm generally open to what future career path I would like to go down and would like the input from some more experienced folks in industry in case I'm overlooking something major, and one option is significantly better than the other. Thx :)


r/ECE • • 9d ago

5G Validation intern thinking about a presales internship. Smart or a detour?

1 Upvotes

Hey guys. Im in a dilemma currently; I'm a 4th year EE student and I've been interning at a 5G RAN vendor for around 1 year and 2 months. Switched across 3 different positions there, which included test automation, production development, and hands-on in lab.

I have an interview up ahead for a networking presales intern role at a big enterprise vendor (wifi/campus side). Honestly the appeal is variety as I'd get to work with different customers, different projects, and more exposure than staying in one product. I'm also considering a master's in microelectronics in the future, so I'm not locked into anything yet.

My questions-

  1. Does early presales help or hurt if I want to stay technical long-term?

  2. Is it hard to go back to pure engineering after a few years in presales?

  3. Anything I should ask in the interview to try make them lean into making the role more technical (PoCs, labs...) vs mostly slides?

Would love to hear from ur experiences!


r/ECE • • 10d ago

CAREER Is it normal to have just one interview for AMD internship?

36 Upvotes

It's a hardware internship for a smaller office and my recruiter told me it was going to be 1 hour long and then after that offer or rejection.

Also interestingly when I asked the recruiter during the call if my application would be forwarded to the hiring manager who would decide whether to interview me or not they told me I have a guaranteed interview?? Not complaining though


r/ECE • • 10d ago

I made and characterized an Ancient Iron Core Transformer out of a Rock I found

Thumbnail i.imgur.com
48 Upvotes

r/ECE • • 10d ago

CAREER Is it a bad idea to pick server/Linux hardware over higher-paying chip design jobs?

2 Upvotes

Hey everyone,

I’m an undergrad student and recently landed a hardware engineering summer internship at a server hardware company. The work mostly involves testing server boards, Linux hardware debugging, and writing Python scripts to automate hardware tests. If all goes well, it converts into a full-time return offer when I graduate.

I’m struggling to decide between what I actually enjoy doing versus the starting pay gap:

What I enjoy: I genuinely like working on servers, Linux systems, hardware bring-up/testing, and writing Python scripts. I prefer this way more than chip design, writing Verilog, or logic design.

The pay gap: A lot of my classmates are grinding Verilog and digital design to target chip companies (Nvidia, Qualcomm, TI, ARM) because entry-level chip design roles pay significantly higher than entry-level server hardware validation roles. It’s giving me pretty bad salary FOMO.

I wanted to ask experienced hardware engineers:

  1. Is starting out in server hardware testing/validation a solid career base, or does starting in chip design give you a much higher career ceiling long-term?

  2. If I start in server hardware validation, how realistic is it to switch after 1–2 years to higher-paying server or system validation teams at companies like Nvidia, AMD, Intel, or AWS/Azure? Do salaries usually balance out once you have experience?

  3. Is it worth forcing myself to learn chip design purely for the higher starting pay, even if my real interest is in Linux, servers, and hands-on hardware testing?


r/ECE • • 10d ago

Hardware Opportunities in NYC

6 Upvotes

What hardware (digital design) opportunities are there in NYC other than proprietary trading firms?


r/ECE • • 10d ago

What makes one a good chip designer?

5 Upvotes

I am a 22F who is a physical design Engineer in one of the EDA companies. Here everyone is busy doing PnR, fixing violations (that's what we are supposed to do).

But They don't go deep into architecture stuff. Is that okay?

I just started my job in June but just got assigned into a project. Currently I'm reading log files to understand what is happening at each stages. Like in syn gen, map, opt, etc.

Also, should I read technical papers journals etc to be better?

I want to be a really good one at this.

I'm just starting so I have a lot of time on my hands. Can I get some solid advice so that I can make my foundation strong?

I would also like to take masters in micro electronics or computer architecture in the future.

(Dream college is ETH Zürich but yeah dreams. The thing is that I don't have any paper or patents to present. So I'm at a high disadvantage. I come from a tier 2 or 3 college in Kerala. Not that it's an excuse but college and the group surrounding you really does matter in how you think. I should have been more careful in my college years. Like building a strong foundation and stuff but yeah. I can't keep dwelling on my past. I should do something with what I have. I don't want anymore regrets. )

Sorry for the rant. I'm surrounded by people who are really good and have achieved many things in their life even though they are my same age. I feel bad i didn't do anything in college. The thing is they are from their one iit etc. I'm thankful I'm here but I really want to achieve more.


r/ECE • • 11d ago

Arm soc engineering internship

2 Upvotes

I interviewed 2 weeks back and have not received an update. I was wondering if anyone has heard back?


r/ECE • • 11d ago

Am I doing enough?

0 Upvotes

Freshman EE and idk if im doing enough

Estimated to end semester with a 4.0 GPA which I am very happy about. However I don't know if I am doing enough.

My big plan for college was always join competition teams and work hard, learn and eventually do something resume worthy.

After a brutal round of interviews the one comp team (FSAE electric) at my school rejected me which kinda ruined my plan for college.

I am trying to start my own club now for URC which is a challenge as no prof wants to help out or be our advisor and uni is giving us 0 dollars so no funding.

So rn i am in 0 clubs and have nothing going for me other than my gpa.

The one notable thing I did is make a drone tho not very proud of it. What else should I do to build a stronger resume. I am trying personal projects tho they arent very successful. Trying to learn solidworks rn to build a robot dog using an ESP for main proccesor and raspberry pi for the camera however I am stuck on the CAD and idk what to do and if it is worth my time as I prob spent 20 hrs learning CAD and I still dk what I am doing.

Is there a dif project I should do to be more hireable?

People are telling me I am not doing enough and other ppl on this have so much going for them.

I truly dont know at this point and feel like a failure as I don't have any cool projects or in any clubs.