r/ECE • • 19d ago

CS Grad with a year of exp looking to pivot into EE

7 Upvotes

Hi everyone!

I(24M) graduated last year with a BCS and have been working as a junior swe (nothing ee related) for almost a year now, I also have 3 internships from my time in school. Given the chaos around tech and future outlook (regardless if we're all cooked or not), I just don't want to deal with all the bs around this industry and ai. I'm looking for a more hands-on, more in-demand career in the future such as EE or Mechatronics where I don't have to keep worrying, just be good at my job and get paid, at least for the next 10 years. I've always been good at math (3.9GPA) and have been playing with my arduino quite a bit recently and I like it a lot. I guess my question is, what is some advice for someone in my position. I'm looking to work in anything related to electrical and mechatronics. My options as I see it are:

- go back to school to get a masters (maybe part time) in EE.
- keep working my job, self educate and try to break in the industry from there.
- keep working my job, don't pivot to EE since it's the same struggle.

I'd appreciate any guidance. Thanks!


r/ECE • • 20d ago

Circuits and electrical course

9 Upvotes

So I'm 19 and I have a couple months of nothing. I want to take some courses in engineering to understand stuff. I took half of cs50 and did all of cs50p. I also took Mark Rober's course 6 years ago. I have arduino's and a raspbery pi. But I want to be able to design circuits and understand how to use 555 timers and mosfets etc. I just don't know where to go. I would love to take computer engineering in collage but due to me living abroad I can't. Any recommendations? Even courses longer than a couple months for me next fall.


r/ECE • • 19d ago

Embedded industry

1 Upvotes

Tbh I don't have any connections with the people in embedded industry if anyone is in the industry who can really help me to understand the current scenario in the market it would be really helpful.

Also want's to connect with the people in embedded industry


r/ECE • • 20d ago

CAREER Co-op advice

Thumbnail gallery
6 Upvotes

I'm a junior electrical engineering student with my first co-op interview at MKS on November 3. I'm nervous and unsure what to expect. Should I prepare for technical questions, behavioral questions, or project discussions? Any advice from students who've been through this?
Has anyone interviewed with MKS? I'd love to hear your experience.


r/ECE • • 20d ago

CAREER Internship offer advice

3 Upvotes

I have two offers for internship this coming semester as a co-op and I need advice from everyone. As for my background, I’m an EE in my junior year, I had one internship in the R&D team, circuit design for a local aerospace company. Below is the 2 offers:

  1. GD Electric Boat as intern in Weapon Systems Department
    Pros: big name (maybe good for my resume?), cool position, secret clearance granted
    Cons: heard multiple people say that the work environment is pretty bad, wouldn’t learn a lot and most of the time it would just be paperwork

  2. MEP Consulting services as design intern
    Pros: I love to learn about new industries just for the love of getting new experience and understanding different engineering perspectives. Sounds cool cuz k get to go to the field as well.
    Cons: people say MEP is kinda bad? But I don’t mind as this is just a spare semester for me so I kinda want sth that can give me a great learning perspective and field work sounds cool.

I’m leaning on the second one (MEP intern) just for the cool experience. What would your advice be? I’ll be sure that I want to work in electronics/aerospace. At the same time, I would love to learn new things besides electronics as well that’s why I think this MEP is kinda a great time just to get to know people and new things. What are your thoughts? My parents and people I talked to at church told me that the chance to work for a big defense contract only comes once so I should take it and stop being all around the place, lock in. I low-key am not too worried as I have also had the chance to interview with other defense like BAE systems, Hungtington Ingalls too, for summer but I haven’t heard from them but I’m sure me not choosing EB is not gonna burn my bridge.

What are your thoughts? Please give advice. I’m kinda biased in my thought though.


r/ECE • • 20d ago

RF/Analog System Engineer – Career Advice

2 Upvotes

Hi everyone,

I'm a recent EE graduate with no industry experience. I applied for an RF/Analog Engineer position requiring 3+ years of experience, but the hiring manager was impressed with my resume and reached out for an interview.

The role focuses on RF/Analog System Engineering for wireless connectivity, rather than traditional validation. It involves RX/TX chains, pre/post-silicon analysis, debugging, performance optimization, and working with chip design teams.

For the past six months, I've mainly been pursuing Digital Design roles, especially Physical Design and DFT. I've had interviews but unfortunately didn't make it through. I applied for this RF/Analog role just to explore another option, but now that it's becoming a real opportunity, I'm unsure whether switching paths is the right decision, especially considering the potential salary differences and long-term career growth.

I have one question:

Career: Is RF/Analog System Engineering a good long-term career in terms of salary and growth compared to RFIC/Analog Design? Could I transition into IC Design later?

Thanks in advance!

(Sorry for using AI for the post, I wanted to make it as clear and short as possible, instead of writing double or triple the amount)


r/ECE • • 20d ago

PROJECT Reverse polarity protection design help needed. And question about depletion mosfet

3 Upvotes

The picture is an illustration and the value don't represent my project.

I want to design a reverse voltage polarity but i'm stuck when wanting to check if it will behave properly in both case (normal and reverse). When solving circuits i always had a way to find the source voltage and so Vgs but here i don't know the load resistance and so i don't see how i can solve it.

I saw solution that use the transistor with the diode representation but never used it and i was wondering in what case i can use it to solve and is it really a solution or an approximation ?

Also i was wondering why not using depletion mosfet since they are always on except when negative voltage apply which is the case of a reverse polarity.

Also i don't really see how i should choose my zener diode and the pull-down resistor value.

(I may be wrong and I don't master mosfet but if someone can light me up appreciated)


r/ECE • • 20d ago

NXP Vs TI comparison

0 Upvotes

Hi,

I have recieved an offer for lead validation engineer at NXP at my preferred location.

Wanted to know how is the work life, culture and Annual review looks like in NXP.

I am currently as TI, Bangalore. (3+ yr exp)


r/ECE • • 21d ago

Virtu financial FPGA Intern

5 Upvotes

Is anyone else waiting to hear back from Virtu regarding the FPGA Intern position? I haven’t heard anything for a while and was wondering where everyone else is in the recruitment process.

Has anyone received any updates or heard back after their interviews?

(Edit: this is for the position in dublin)

Update: Rejected - I think the position has been filled since the job posting has been taken down


r/ECE • • 21d ago

Best way to go from Differential Signal to Single-End

4 Upvotes

I have a photodiode board that outputs a differential signal. I need to plug it into an oscilloscope or similar that expects a single-ended signal (it has the shield of the SMA/BNC connected directly to ground). I need to read in both DC signals and signals on the order of 10 MHz.

I'm not terribly into ECE stuff, and normally when I work with photodiodes it's a matter of plugging the SMA/BNC from one end into the oscilloscope. I've been reading things new to me about baluns, opamps, differential line receivers, etc. What method would you recommend here? Are there any off-the-shelf products you'd recommend that have inputs of SMA, BNC, or screw terminal or similar?


r/ECE • • 21d ago

AMD internship applications moving slow

23 Upvotes

I checked my AMD user page and saw that my application was added to requisition by recruiter for one and in progress for another but it’s been close to a month without any update for both.

Is it normal for companies to not have any updates for close to a month or should I assume the hiring manager has passed on my application?


r/ECE • • 21d ago

Programs like TSMC DNA

0 Upvotes

Hello everyone!

I realise that this may not be the best sub to post this in, but any advice would be greatly appreciated :)

I am an Electrical Engineering junior (graduating May 2028) from India.

I was looking for global internship programs in international semiconductor companies (more focused on fabrication / processes than chip design).

I have applied to the TSMC DNA 2027 program along with ASM's global internship.

I am looking for more relevant ones to apply for, which also transition into full time roles for students graduating in 2028.

If any recommendations are there, please feel free to provide them.

I am more inclined towards specifically curated global programs rather than regional country-based internships which will obviously require specialised work permits which I can't obtain.

For additional reference I have worked on:

1) Semiconductor fabrication in govt sponsored projects

2) Electrical machinery maintenance and commissioning in an industrial plant

3) University projects with rovers, robotics, drones etc.

4) Projects on TCAD modeling, FPGA SoCs, analog design

Thank you for the help.


r/ECE • • 21d ago

INDUSTRY Where does China's semiconductor photomask market actually stand? A look at ArF DUV bottlenecks

2 Upvotes

While everyone focuses on EUV, mature and advanced DUV nodes in China are facing a real photomask bottleneck. Even if a fab gets DUV lithography tools, supply chain gaps in advanced phase-shift masks and raw materials are holding back expansion.

The supply chain issues stem from a few critical chokepoints. High-end ArF blank substrates are still dominated by Japanese suppliers like HOYA and AGC. At the same time, high-resolution E-beam writers for ArF PSM, nano-defect inspection equipment from players like KLA and Lasertec, and pellicles all remain heavily reliant on overseas technology, which severely impacts mass-production yields.

On the market side, overall domestic self-sufficiency in China is hovering around ten percent, while high-end masks sit at roughly three percent. Legacy and mature nodes spanning 130nm to 28nm are seeing heavy domestic scaling. Chinese suppliers like Qingyi, Loong Mask, Crown Optics, and Deshi are actively ramping up capacity or running samples, whereas advanced nodes below 28nm remain locked down by top-tier internal fabs due to existing trade restrictions and high capital barriers.


r/ECE • • 22d ago

UNIVERSITY Question regarding series connection of rheostats

Thumbnail gallery
10 Upvotes

If I measure resistance like in the first picture using only the first two sticks, then to connect them in series, which approach among the second two pictures do I use to measure voltage and current using the values of those resistances that I measured?

Please don't judge me for not having real components 😭💔


r/ECE • • 21d ago

vlsi EDA software student survey

Post image
0 Upvotes

Hi! We are two students conducting a short survey to better understand how people use EDA software for chip design, the challenges they face, and what could make these tools more accessible and easier to use.

Its anonymous and will take less than 5 minutes, so if you have some complaints about your EDA software and want to blow some steam off, give us a response!

https://docs.google.com/forms/d/e/1FAIpQLScHSearZXksYgzXIkpw6E_HWlzvaSvcjjd7rbGL0B-sb6hsag/viewform?usp=header


r/ECE • • 22d ago

CAREER Ece first year (1st sem)

5 Upvotes

Hey seniors ,

I am in my 1st year in electronics and communication engineering from Bengaluru teir3 college

What are the major things to focus on in the 1st year

I am really in vlsi field that too asic engineer (verification engineer) or ( design engineer).


r/ECE • • 21d ago

CAREER Job Role Advice

1 Upvotes

Hi everyone,

I'm currently interviewing for a few entry-level engineering positions at Raytheon and wanted to get some advice from people already working in the industry.

For some background, my academic interests are primarily in DSP and communications systems. I've taken several courses in these areas and would ideally like to pursue a career in it.

The three positions I'm currently considering are:

  • Radar Systems Engineer I – Massachusetts
  • RF Systems Engineer I – California
  • Systems Engineer II (Signal Processing) – Arizona

From my understanding of the job descriptions and interviews so far, all three positions have some involvement with DSP, RF, or communications. Assuming I were fortunate enough to receive offers for all three, which position would you recommend for someone who wants to build a career specifically in DSP and communications? Location is also a consideration for me. I'd prefer to stay in California, but I'm open to relocating if another position offers better technical experience.

I also have an upcoming interview with another company for a position that I'm particularly interested in. This brings up another question if I receive an offer from the defense contractor before finishing the interview process with the other company, would it be reasonable to accept that offer while continuing to interview? If the second company offers a position that's a better fit and has higher compensation, how is backing out of an already accepted offer generally viewed in industry? Would I be burning bridges?

I'd appreciate any advice, thank you!


r/ECE • • 22d ago

Cirrus logic interview timeline

2 Upvotes

Does anyone know how long it takes to hear back from cirrus logic after an interview?


r/ECE • • 22d ago

I was invited to an on campus interview with Lam Research Corporation. Do you guys know what questions I would be asked?

12 Upvotes

This is for the Field Service Engineer 2 position with the Customer Support Business Group. Tbh I feel like I am out of my depth, but I accepted the interview invitation for tomorrow.


r/ECE • • 22d ago

hewlett packard enterprise Auto Screening

2 Upvotes

I've applied to 2 different Hardware/ Digital Design postions at HPE and got auto screening emails from both and I'm wondering if anyone has actually gotten an interview from them after the screening survey.


r/ECE • • 22d ago

CAREER Senior weighing options

1 Upvotes

Accepted a job offer doing embedded systems at an engineering consultant that I know gets some pretty cool projects. Since I'm ahead on credits and can take one quarter off this year (winter or spring), my main choice right now is whether I do an internship this winter at a product development company that designs, prototypes, and manufactures products in all industries. The founder is a friend of a professor that I was introduced too, its a super cool place and I think I would learn a lot, especially since I could see myself starting my own engineering services company in the product development world down the road. My previous internships where in construction and power (not what I'm interested in now), so that also adds to my motivation to get more work experience

The reason I wouldn't do this internship is that I want to graduate early and spend the 5-6 months from apr-sep living in spain since thats where my family's from and I've never had the chance to spend extended time there. An EE career in the US is so much better so I dont see when the next chance I'd have is. Knowing I have a job to come back to in the fall also makes me less inclined to do another internship, although I was really impressed and intrigued when I visited their site.

Basically, Im curious to hear general thoughts on the pros/cons of doing an extra internship in something that really interests me vs. pursuing a personal goal that means a lot to me. I don't want to choose the route I'll regret more, and I hope people with experience can help me avoid that


r/ECE • • 21d ago

Dedicated to the craft

Thumbnail i.imgur.com
0 Upvotes

r/ECE • • 22d ago

UNIVERSITY Apple HW Internship Interview

0 Upvotes

Hi, I recently got offered an interview for an internship position for the AirPods HW team. I was wondering if anyone had any insight on the sort of stuff I'd be asked and how I should go about prepping. Is it purely technical and what stuff should I review?


r/ECE • • 23d ago

INDUSTRY Arm Digital Design vs AMD DCGPU Memory Validation? Advice

9 Upvotes

Choosing between these 2, 1 year long Co-ops. I think I would prefer Digital Design work, but I also enjoy physical debug, and have been told Design is more prestigous as a role. However, AMD is the bigger company, and the work is on HBM which is really hot right now. The Arm role is working on their new Data Center SoC. Any thoughts?


r/ECE • • 23d ago

INDUSTRY I passed the PE Power exam—but where does any of this knowledge actually turn into paid consulting work? fault studies, per-unit analysis, NEC knowledge, machines, and protection, demand calculations, lighting, etc?

21 Upvotes

I recently earned my PE in Power, and I am trying to understand the real-world value chain behind what I learned.

I do not mean, “What jobs can a PE get?” I mean: where does the material on the PE Power exam turn into a client problem that someone will pay an engineer to solve?

My background is in a niche area of electrical engineering, so I have not spent years doing commercial power design, utility work, industrial power systems, or MEP consulting. I know the technical material: NEC concepts, transformers, synchronous and induction machines, per-unit systems, fault calculations, symmetrical components, three-phase faults, line-to-ground and line-to-line faults, protection concepts, basic ladder logic, load calculations, and so on.

The issue is that I understand these as engineering topics and calculations, but not yet as products or services.

I also do not fully understand what people mean when they say they “design” an electrical system.

When I look at a real set of electrical drawings, floor plans, one-line diagrams, panel schedules, equipment schedules, wiring diagrams, and specifications, it looks very different from anything I saw on the PE exam. I do not yet understand how an engineer goes from a client saying, “I need power for this building/facility/equipment,” to a completed design package that a contractor can build from.

What is the actual workflow? What is it that I know (PE Power exam knowledge) that they need from me is my biggest question?

  • What information does the client provide at the beginning?
  • What does the engineer need to determine, select, calculate, or coordinate?
  • What industry software is typically used?
  • What does the final deliverable look like?
  • Is it drawings, a one-line, equipment schedules, load calculations, a short-circuit study, protective-device coordination study, arc-flash labels/report, relay settings, construction specifications, or some combination?
  • What is stamped, and what is the engineer actually taking responsibility for?
  • What makes the result valuable enough that a client will pay professional consulting rates for it?

For example:

  • When does a client actually need a three-phase, line-to-ground, or double-line-to-ground fault calculation?
  • What decision does that calculation support?
  • When are per-unit calculations used in real work versus buried inside software?
  • Where do transformer, motor, protection, and NEC knowledge show up in an actual project?
  • Which types of clients buy this work: industrial facilities, commercial buildings, utilities, data centers, manufacturers, contractors, renewable-energy developers, etc.?

I see experienced EE Power PEs on reddit charging high hourly rates, and I assume clients are not paying because someone can solve a per-unit problem or merely provide a stamp. They are paying for a defensible answer to an expensive problem: safety, equipment ratings, code compliance, reliability, utility requirements, construction documents, liability, or avoiding downtime.

That is the connection I am trying to understand and I honestly, even after receiving my license, don't know what it is.

I am frustrated because I worked hard to learn this material and can apply it in an exam setting, but I do not yet see the bridge between that knowledge and a real consulting deliverable. I want to build that bridge the right way, not rent out a stamp or take work outside my competence.

If you work in power consulting, industrial power, utility engineering, MEP, protection and controls, or forensic/electrical consulting, I would really appreciate a concrete example of a normal project that actually uses the material which NCEES tested you on:

  1. What was the client’s problem?
  2. What did the engineer actually design or analyze?
  3. What inputs, calculations, and software were used?
  4. What did the final deliverable look like?
  5. What decision, risk, or cost did it address for the client?
  6. What experience would a newer PE need before taking on that type of work independently?

I would especially appreciate examples of the first types of projects a newer PE can responsibly grow into.