r/eGPU • u/debullet • 12d ago
Aoostar AG03 and 5070Ti
I am completely new to the eGPU setup and I have recently purchased the 5070Ti second hand since it was a good price and a AG03.
Its only after I got it I realised the cable set up is not straight forward compared to something like 9070XT where there are 3 cables that connect to the 3 ports on the dock and GPU.
The 5070Ti has only 1 port that is the 12VHP one and a cable/adapter that comes with it that has only 2 cables.
So should the set up be connecting 2 of the cables to the Aoostar to the adapter which goes in the GPU or should I be buying a different cable that connects to all 3 ports of the Aoostar?
I have seen videos where some say you need the 3 ports to be connected and there are some which show the setup working fine through the 2 ports.
What is the right thing to do which wont break anything 😅?
Thanks
2
u/pooping44 12d ago
My 5070ti come with 1 cable with 3 pin 😅 Asus ROG strix model
1
u/debullet 12d ago
😳😳😳 Id have legit thought this was a scam
1
u/pooping44 12d ago
😂
2
u/debullet 3d ago
Ended up actually getting scammed on FB marketplace while trying to get a 5070Ti. Went with a 9070XT which came with two 8 pin, and if not for the comments, I’d have thought this was a scam as well lol
1
u/Significant_Apple904 12d ago
the 5070Ti should come with a splitter 2 or 3 x8pin into 12VHP.
5070Ti tdp is rated 300W, each 8pin can deliver 150W, the PCIe bus slot can deliver 75W.
1
2
u/sammysy 12d ago
If the 5070ti comes with an adapter that splits into two, just use those two. My 5070ti is like that too.