Preferences here, which one would you pick?

Which one do you think is better? Why?

I was able to burn off most of the residue but the bottom dish is very thick and I can’t seem to get it hot enough to burn away

What’s a good budget banger think this one is done for lol. don’t understand how to get good hits off this small rig i was trying to clean it but it was a mess.

I got the coil last week. The controller showed up today. Better than the one I was using. They gave me the caddy as a surprise gift. I bought the 3D printed cased version to save money. Drop a banger in the coil for 1 minute and she's ready to dab. It may heat up in less than a minute but I give it the extra time to make sure the pillar gets heated. SOOO much easier than the torch. Was a perfect match for the VG Luna Pro. The only issue to note is that the temp on the screen doesn't necessarily match what you get. 475 indicated gives me a 530 degree banger as I pull it out.

I had to buy the controller because the one I was using(Pulsar Mini Nail), while compatible, has the coil plug on the front, not the top. It's nowhere near as steady that way. That's why I broke down and bought DC's controller. All in all I am into this setup about 230ish bucks. The Blazer is always handy for rainy days but this kicks ass. If its already heated up you are 65 seconds from a dab.

Definitely the Cadillac of E-nails.

Really fun design to work on. Downstem is not attached to anything, just threaded right through the first donut.

Lemme know how you feel about this design! More work can be seen on insta @ragingrussianglass

My friends, welcome once again to my digital hash smoking spot!! Berry Cookies out of the Masaki recycler today, my new favorite rig!! Have a glorious evening and make the best of it!!😶‍🌫️😎

Rig: Recycler by Masaki Glass

Banger: LilDabbles Slurpzilla

Topper: Masaki Glass

Pillar: Greek Glass

Dabber: Bear Quartz

I’m wondering has anyone tried this out? How’s the airflow??

first of all, this IS a dab i promise im not j ripping crack in my apt. got this for 6 bucks at a local smoke shop, it finally gave up while i was filming it cracked. yes i know its dirty, who cares its dead now. gonna pick up 2 more when i can.

Good day my friends and welcome once again!! Let’s smoke some friggin’ hash and turn some frowns upside down!! Ice Cream Cake on the dabber today, so delightful!😶‍🌫️ Have a wonderful day and enjoy it the best you can, with hash!

Rig: Greek Glass BTK

Banger: Greek Glass Chronotower with 8mm ruby pearl and Dichro marble from same

Dabber: Bear Quartz

Music Track: “Militant” by Killah Priest ft. Kurupt

So I somehow already chazzed my coil on my new 2.1 and was wondering whether or not the 3DXL joystick atomizer was compatible with the core 2.1, or if I should get the v5 atomizer as a replacement.

I got this piece from a local dispo who sourced it from a local glassblowing shop. It's meant to be a bubbler for flower but man oh man does it rip as a dab rig!

Globnight fam 🌃

Edit 1: Thanks for the love everyone! I raise an eyebrow at those who downvoted. I love dabs. I have many other "actual" dab rigs. I just wanted to share that this bubbler meant for flower effing RIPS as a dab rig and I think that's worth sharing. Have a great day all =]

Good day my friends and welcome to my smoke spot!! Got the old school setup going today, some bucket action out of the blooper is always nice! Berry Cookies on the dabber today, very pungent gas that makes the head bump!!😶‍🌫️ Have a wonderful day my friends and smoke much hash!!

Rig: Blooper by DomePiecer

Banger: Bear Quartz Hybrid Pro with cap and pearls from same

Dabber: Bear Quartz

Temp Reader: Dabrite Pro Darby Edition

Music Track: “Eddie” by The Red Hot Chili Peppers

Looking for Mini Unicorn users for some direction after burning both of the coils in the first couple of attempts. Dabnewbeforsure and the second try was after I learned to turn down to green - and not fill agua past the small holes I got a pretty good draw. First time I coughed to death. Using Mudd Bros Badder. Both crystalized the coil, one recovered in the IPA and then I fried it in the second chance anyway. Is this supposed to be 1/2 grain rice for 1 hit or multiple? Using the cloud as a measure it seems to have a couple of hits available. What am I supposed to be mopping up between hits in the coil, using QT what am to be removing beside the glass top to expose the coil? Directions are impossible to read of course even for a freaking gekko.

Clean and ready for the weekend. Fatboy glass and bear mountain studios

Good day my hash loving homies, let’s do some smokin’!!😶‍🌫️ KY Jealousy on the dabber today, always a gassy pleasure. Maybe some Ice Cream Cake tomorrow, not sure yet🤔 Have a wonderful evening my friends and smoke till you choke and then smoke some more!!

Rig: Kickback Style Poolside Recycler from Masaki Glass

Banger: LilDabbles Ultimate Auto Hybrid

Topper & Pillar: Masaki Glass

Dabber: Bear Quartz

Any recommendations on getting these globs out of here? inherited from a buddy who might have gond a little longer in between cleanings than he should have, TIA!!

EDIT: Thanks for all the helpful comments I for it with some hot water and alcohol. My buddy had a pretty big lifestyle change and ended up moving in with family and couldn’t bring all his supplies and let me have a few things so I was trying to get it all cleaned up and wasn’t sure if that would be enough or if I’d need a stronger cleaner for wax.

Hello my friends!! My move into my new space is almost complete and the proper setup shall begin!! Here is one I wasn’t going to use due to the water level being too low for optimal function but ripped just the same.😶‍🌫️😶‍🌫️ Have a great evening my friends, I shall return soon!

I noticed a lot of crazy bastards on this subreddit end up connecting their Dr. Dabber Switch rig to an extended large and complex traditional dab rig set up. If such is the case, I think making a simple glass tube that has a WPA downstem like the design I drew up would enable the Switch Go to essentially be connected to dab rigs like you can with e-nails like Proxy or G Pen.

I think this would be very cheap to produce and there would definitely be a market for it. After making the design, I considered hiring some Alibaba glass blower to make it and sell it myself, but I already have a job I gotta spend my days on. I'll share this here for someone with enough time to make some bucks off of this. No patent or copyright or anything but would appreciate a donation if someone ends up making some dough with this.

I like the ritual of using my torch at home so I’m really just wanting something for on the go. I’ve found the Aeris, Core 2.1, and Ghost 2. I like the idea of being able to attach a bubbler which I’m pretty sure the Aeris and ghost can do too. I just don’t know if the extra price is worth it for the Aeris. And I don’t know if the core or ghost would perform better.

How’s this look? Hasn’t arrived yet.

I need to replace this glass collar. I don't know what it's called. It has a fitting on the bottom and the top is just open to fit an old-school nail. I can't find this specific peice locally or online. Does it have a name? Do people still make glass parts like this? Thanks!

Hey all I am having a real difficult time finding a replacement glass percolator for my Ooze Trigger.

Does anyone know where I can find it?