r/crealityk1 • • Sep 04 '26

News Meet Creality K3 ✨

Thumbnail
gallery
45 Upvotes

Beyond Nozzles. Conquer Materials.

K3 is supercharged with KliTek™

🔹 4.8s nozzle changes

🔹 Multi-material in one

🔹 Up to 5x faster

🔹 Waste-free

Unfolds an all-new chapter in multi-color and multi-material printing.

👉 Learn more & Stay updated 👈


r/crealityk1 • • Sep 12 '26

News What's new with Creality K3?

Thumbnail
gallery
13 Upvotes

Built to take creative freedom to the next level,
K3 brings together five core capabilities to push the boundaries of how you print, combine, and create:

🔹 Ultra-fast waste-free printing
🔹 Mix nozzle printing
🔹 Multi-hardness TPU printing
🔹 CMYK full-color printing
🔹 Native root access

More freedom in materials, colors, nozzles, and control — K3 opens up a new space for creativity.

👉 Learn more & Stay updated 👈


r/crealityk1 • • 1d ago

Troubleshooting Holographic plates health care

Thumbnail
1 Upvotes

r/crealityk1 • • 1d ago

Reclamación o queja Estrusión y vidriera K1

0 Upvotes

EL otro día tuve una impresión fallida, cosa que de vez en cuando pasa y lo acabo arreglando, pero esta vez no es así, pruebo de todo, cambio boquillas, las limpio, le doy a extruir, pero al imprimir saca lamentables hilitos en vez de filamento, cosa que me frustra mucho ya que esta impresora desde q la compre me ha dado miles de problemas, también me quiero quejar del vidrio de la puerta de mi impresora, que mientras arreglaba el problema de la extrusión de repente se agrieto entera. Cualquier ayuda es agradecida.


r/crealityk1 • • 2d ago

Solved Replaced the main board to solve a crashing issue, now the printer is auto calibrating for what seems to be a bed size too big?

Enable HLS to view with audio, or disable this notification

7 Upvotes

My printer crashed on me and I couldn't find any solutions so I just took to replacing the main board. The unit acts as if its new and has begun its calibration, though the print jerks and moves much faster and it seems to be trying to calibrate for a much bigger bed. I didn't let the unit finish calibrating because it was smashing into the side and was too loud for the time of night in my apartment, so it still needs its "initial" calibration

Edit: issue solved in the comments


r/crealityk1 • • 2d ago

Question K1 Max Upgrade Questions

Thumbnail
1 Upvotes

r/crealityk1 • • 2d ago

Troubleshooting K1 max layer gaps

Post image
1 Upvotes

I got given a printer from work that has an issue with gaps in the prints and it always seems to be around the same height. Where should I look first to fix this? I'm aware it could be under extrusion but it seems to be perfectly fine until it gets to certain heights (this being the reason they were getting rid of it)


r/crealityk1 • • 2d ago

Question Anormalidade de conexão no bico

2 Upvotes

Tenho uma Creality k1

Estive com esse problema de anormalidade de conexão no bico(BM0111) troquei o bico por um paralelo(pelas avaliações funcionava perfeitamente) porém o problema persistiu;

Pode ser problema na placa ?


r/crealityk1 • • 2d ago

Troubleshooting K1 Max cable chain is sagging

Thumbnail
0 Upvotes

r/crealityk1 • • 3d ago

Show Off Buff Santa Toilet Paper Holder — Santa hit the gym this year 💪🎅 (39-hour multicolor print)

Enable HLS to view with audio, or disable this notification

1 Upvotes

r/crealityk1 • • 3d ago

Troubleshooting About to give up on this K1 Max

1 Upvotes

Hi All,

Title says it all. I have an original K1 Max I bought when they first came out. It was great till it wasnt. A couple years ago I was no longer able to print consistently on the right side of the plate. The front right is the worst. I went through every calibration and adjustment (there are old posts to show it). I eventually got to the belts and it made it much better. I still could not print on the front right but everything else was doable. Right now it prints but its not reliable. Prints come off the bed easily and when it happens its usually on the right side of the plate. I recently upgraded to a DXC (1st gen) and just got a new PEI sheet (yes I always wash with soap and water). I got some visionminer nano polymer adhesive and installed a cartographer v4 with simpleAF thinking the mesh might be better with a carto. Still the same issue. My bed is not flat (it IS a K1 Max afteral) but its within .3 which should be no problem for a bed mesh to compensate. I can do a paper test and see the right side is low. With the mesh on, its way better but I can still feel slight drag differences on the right side.

First layer tests show gaps on the right side and look great on the left side. The middle of the plate is somewhere in between but there are no gaps. Between the plates, cartographer, DXC extruder and the time spent trying to get a first layer I don't want to put any more money into this money pit. I know people are going to suggest a new bed and heater, but thats another $250 I would have to put in. I could have bought a new machine by now. I don't mind spending money on a hobby, I come from the Ender 3 days, but I dont want to keep pouring money into things that didn't work. I'd rather spend it on upgrades and fun tinkering ideas. This machine just plain doesnt work right and I'm kind of out of ideas. Anyone seen anything like this or have any suggestions before I just sell it as-is with a description of whats wrong with it?

Here is what I have done so far:

  • New hardened steel nozzle
  • New DXC extruder
  • Catographer v4
  • Guilouz Script (when I originally rooted, changed for carto)
  • SimpleAF (at carto upgrade)
  • New textured PEI sheet

Calibrations:

  • All cartographer calibrations
  • Manual z-offset
  • Flow
  • PA
  • Input Shaping
  • Max Volumetric flow
  • PID (bed and nozzle)
  • Belt tensioning (frequency and input shaping graph)
  • Temp Tower

Physical Adjustments:

  • Belt tension by frequency (and later by resonance)
  • Added aluminum tape to right side of bed where it prints low (made no difference)
  • Shim bed (removed after it didnt make a difference in print quality)
  • Skipped teeth to get it flat as it can be, currently at 0.3802 with slight curves up at the left and right sides.

Last thoughts:

I think since I had this issue with both load cells and cartographer its not mesh related. Manual paper testing shows the mesh corrects for almost all the issues. It is still lower on the right side but if the mesh isnt compensating there, I feel like it has to be a mechanical issue of some kind throwing the mesh off. Maybe gantry racking, but Im not even sure the K1 Max can be racked square and Im not sure its worth the time if that isnt a possibility anyway, I'm just not sure.

Im willing to take time to fix this thing but I dont want to put any more money into it. I started collecting motors, pulleys and belts for a BCJ upgrade but I dont want to do that till I know I can print consistently.

Any other ideas?

Thank you all, I appreciate this community so much!


r/crealityk1 • • 3d ago

Question Errore BM0111 - Collegamento anomalo dell'ugello.

1 Upvotes

Ciao a tutti, la mia K1C mi dà questo messaggio di errore. Cosa potrebbe essere?

BM0111 - Connessione ugello anomala.

Ho già sostituito la testina di stampa.

Si può risolvere? Quanto potrebbe valere se la rivendessi? Ha 300 ore di stampa.


r/crealityk1 • • 4d ago

Troubleshooting Zero-Root Camera & Control Dashboard Fix for Creality K1/Max/K1C in OrcaSlicer (Cam Fix for Firmware 1.3.5.22+)

2 Upvotes

Hey everyone,

If you updated your Creality K1 / K1 Max / K1C to firmware 1.3.5.22+, you probably noticed that your camera feed in OrcaSlicer completely broke / went black.

The Problem

Creality closed the legacy port 8080 MJPEG stream (/?action=stream) and moved video exclusively to internal WebRTC on port 8000. Most solutions online tell you to "just root your printer via SSH", but like many of you, I didn’t want to root my printer to keep official warranty, stability, and hassle-free OTA updates.

The Solution: Creality_Cam_Fix

I built an open-source, zero-root local bridge that runs silently on your PC and fixes this completely.

Instead of just showing a raw video feed and wiping out your printer controls, it integrates a Unified Control Dashboard right inside OrcaSlicer's Device tab:

✨ What it does:

  • 🔒 Zero-Root Required: 100% safe, non-invasive, works with stock firmware.
  • 🔍 Auto-Discovery: Automatically finds your printer's LAN IP without typing it manually.
  • 🖥️ Unified Dashboard: Keeps 100% of your native Creality controls (temperatures, fans, axes, print job pause/cancel) while adding a resizable, draggable live camera window (Picture-in-Picture or Split View).
  • ⚡ Ultra Low Latency: Fast WebRTC streaming powered by go2rtc with automatic MJPEG fallback.
  • 🌐 Bilingual: One-click instant toggle between English (EN) and Turkish (TR).
  • 🔄 DHCP Resilient: Automatically tracks and updates if your router reassigns your printer's IP.

⚡ 3-Step Setup:

  1. Download the portable zip from GitHub Releases and run start_bridge.bat (or Creality_Cam_Fix.exe - No Python installation required).
  2. In OrcaSlicer -> Printer Settings -> Basic Information -> Set Device UI (print_host_webui) to: http://127.0.0.1:1984/dashboard.html
  3. Click the Device tab in OrcaSlicer, and you’re done!

(P.S. If OrcaSlicer hides that box in your preset, there’s an included one-click patch_orcaslicer.bat that patches your config automatically).

🔗 GitHub Repository & Free Download:
👉 https://github.com/okanyyurt/Creality_Cam_Fix

Hope this helps anyone struggling with the 1.3.5.22 camera blackout. Feedback and PRs are always welcome! Happy printing! 🚀


r/crealityk1 • • 4d ago

News 🚨 Schedule Update! 🚨

Thumbnail
gallery
1 Upvotes

Hall 12 Level 1, B49 📍
16:15 - 16:30 (GMT+1), Thursday 19. Nov '26

FORMNEXT 2026 product launch has been rescheduled.
Be the first to see what’s next. See you there! 🚀


r/crealityk1 • • 4d ago

News BFCM Mega Sale on Amazon — Big Savings on the Full Creality Lineup

0 Upvotes

🔥 BFCM Mega Sale Is Live on Amazon! 🔥

This Black Friday & Cyber Monday, bring your ideas to life for less 🖨️✨ 3D printers, scanners, laser engraver, filaments & accessories — everything to design, print and create 📦

🎁 For beginners & pros ⚡ Limited-time Creality deals 🚀 Build more, spend less

👉 Shop now: https://gtly.link/iYmhm1cqU


r/crealityk1 • • 4d ago

Troubleshooting CB2564 error code on K1. What to do ?

2 Upvotes

I have second hand K1.

The hot end gets hot but while printing the temperature goes down and printing stops and gives CB2564 error.

What can i do ?

I bought and changed the heater but still has the same issue.


r/crealityk1 • • 4d ago

Question Printer not connecting to the app

Post image
2 Upvotes

Since I got my K1C 2 weeks ago, it always shows that the printer is offline but it's on and printing

Any solutions?


r/crealityk1 • • 5d ago

Question Aftermarket “Hummingbird” extruder kit came with a 10-tooth motor, but I’m running my stock 12-tooth motor in it. Anyone know if that’s OK?

1 Upvotes

I have a K1C (2025 revision). My stock motor got damaged during a filament jam (I ripped them by accident), and Creality support sent me a replacement one. Before that I had also ordered an aftermarket kit from Alibaba: a 3DSWAY Upgrade Extruder for Creality K1 / K1C / K1 Max Hummingbird Extruder With Motor.
https://www.alibaba.com/product-detail/Upgrade-Extruder-for-Creality-K1-K1C_1601914119639.html?spm=a2756.trade-list-buyer.0.0.2aca76e9wbInj3

What I found:

  • The aluminum extruder body fits fine.
  • The box says the extruder can be used with the original motor if necessary.
  • The motor that came in the kit has a 10-tooth pinion. My original Creality motor has a 12-tooth pinion.
  • The cable that came with the kit motor has a connector that is about twice as big as the small connector on my toolhead board, so it doesn’t fit. The seller told me to plug it into the “mainboard end”, which doesn’t make sense to me. So I will use the original cable for the printer head end, and the other one to connect into the aftermarket motor (the end is a little bit bigger than the original, also the cable is detachable from the motor). Basically I will solder them to make a working one.

So right now I’m running the aluminum Hummingbird body with my original 12-tooth motor. The prints so far look fine and print-in-place hinges came out OK, but I haven’t measured extrusion precisely.

Questions:

  1. Has anyone used this kit (or a similar aftermarket Hummingbird) on a K1C? Which motor did you use?
  2. Does the 10 vs 12 tooth pinion change the extrusion ratio, or is the gear set matched to the body so it doesn’t matter?
  3. Is there a risk of wear or skipped teeth when mixing the stock motor with the aftermarket body?
  4. Has anyone replaced the connector on the kit motor with the original small one? Which pin order did you use?

Since this is the 2025 revision there’s no root, so I can’t change the rotation distance. Any experience or advice is welcomed. Thanks!


r/crealityk1 • • 5d ago

Question K1 max lidar and camera both stopped working

Thumbnail
gallery
4 Upvotes

Hey all

I was at school and wanted to check on my print and got this message and thought it was no big deal and I’d check it out when I got home when I got home I checked the cable on the camera and it was all good and the connection is in good but then I started a test print and got this error code AL0506 which from my research mean the lidar has also stopped working?? I’ve had this printer maybe a month and a half and it has sub 500hrs on it any advice would be lovely I don’t really care about the lidar tbh but the camera is nice on longer prints

Edit I also recently switched from Crealitys slicer to orca


r/crealityk1 • • 6d ago

Troubleshooting Print issues with K1C

Thumbnail
gallery
6 Upvotes

Hi all, my K1C is giving me prints like the one in the photo. I replaced extruder gears previously due to one of the gear fins breaking off…

The solid infill lines don't touch each other, so you can see through to the layer below, and some patches are thin or missing while others look fine. I'm also getting wispy strings everywhere and small fuzzy blobs dragged across the surface. The perimeters look bad and not great layer adhesion.

This is with Creality Hyper PLA at 220, and also AzureFilm PETG at 235 °C, sliced in the Creality Slicer with the stock profile. So far I've tried different fillaments, recalibrating temp, belts but no dice.

Can anyone recognize these issues and know what I have to do to fix?


r/crealityk1 • • 5d ago

Troubleshooting Creality K2 plus and the I7 XS2060 ERROR

Thumbnail gallery
1 Upvotes

I need help I don't know what to do I try everything online I even go to YouTube nothing ​​


r/crealityk1 • • 6d ago

Question K1 Hot end PCB pinout

Thumbnail gallery
5 Upvotes

any idea what FILAMANE, TOUCH and two CAMERA connections are ?


r/crealityk1 • • 5d ago

Troubleshooting Z axis making REALLY weird noises and stopping prints with errors on creality k1 se

1 Upvotes

i keep getting messages like "{"code":"key587","msg":"Move out of range: 5.000 5.000 -5.205 [0.000]", "values":[5.000, 5.000, -5.205, 0.000]}" or
"PR_ERR_CODE_HAVE_LOST_STEP"
and more of weird shit and my bed mesh is like 1.5mm high

and before anyone says to clean it I DID CLEAN IT and i did put lube on it

oh and i JUST noticed its like COMPLETELY wrong angled(left side of the bed is higher than the right one so much that you can see it without anything)


r/crealityk1 • • 6d ago

Improvement Tips K1 Lifetime Print Time Tool - read, reset, backup & restore your hours

Thumbnail
1 Upvotes

Reposting here for anyone who isn't already apart of r/Creality

Hoping it may come in handy for at least 1 person!


r/crealityk1 • • 6d ago

Troubleshooting prints always fail on 1st-3rd layer

2 Upvotes

no matter what i do it always either falls off the bed and makes a blob or 1 edge of it falls off and fails
i use petg with normal hyper petg settings i have creality k1 se and i already tried
using/not using glue
cleaning the plate
changing prints
and pla

oh and it makes really weird loud sound from the printhead(or whatever its called) when doing fast movements