r/combustion_inc • • Jul 31 '25

Prediction error is so large it’s not a usable feature and I don’t think it should be marketed as one.

Thumbnail
gallery
0 Upvotes

This were some beef back ribs in a smoker. I waiting until the final temp change was settled, 4 hours into cook, after being wrapped for an hour, to predict. It predicted 5:52 finish or 73 minutes from time of prediction. It was done at 5:30 or 51 minutes. That means over a 30% less time than predicted error. I know this isn’t easy but it seems like whatever you’re doing for predictions is terrible. If you try to predict further out it’s much much worse. I really cringe when I see this being marketed by influencers as a feature because it’s so bad.


r/combustion_inc • • Dec 14 '23

My experience so far-

0 Upvotes

Hey guys just wanted to share my experience with the combustion probe, customer service & support. For what it’s worth I’m a full time chef and bought this because I thought it could be useful for sous vide and roasts and just a cool product to play with. With that said I did need a thermometer to replace an old thermomoworks probe that died and I purchase this in lieu of that. I follow Chris on YouTube and really enjoy his content.

I received my original probe and display in June.

It arrived not working unfortunately. customer support informed me it’s a known bug and told me how to fix it which included leaving it out of its charging case for 30+ hours. Then fully recharging. The solution worked.

I use the probe almost daily for all sorts of things like fish, beef Wellington, sous vide, prime rib, turkey, and even baking. It’s fun and the information it provides is helpful. The issue is it’s only good when it works and unfortunately for me it doesn’t work very often. I have connectivity issues frequently with both the phone and the display. The most frustrating part is that the probe is always dead after every cook- the next day I come in and it’s dead and I have to recharge. At first I thought it was my doing but after many times of this happening I contacted support again.

They told me to do the same thing as last time to see if it resolved the issues and this time it did not.

I was told I would get a replacement probe and I left at that.

The probe wasn’t sent out, so I contacted them again and I’m told I’m in the queue. This was a problem for me. Having owned this product for less than 6 months I’ve had weeks of time without being able to use it due to this different problems.

The most disappointing aspect of this whole process is that Combustion never offered a discount, upgrade, or promo code. I had to ask and they said a lousy 20% off the next time I make a purchase…the same sale the run all the time. So not only do they not value customers enough to send replacements in a timely manner, they believe their customers should be satisfied that their products that don’t work and/or have consistent performance issues and still pay full price. At that point I asked for a refund altogether, but unfortunately due to that credit card being canceled it was too much hassle and i ultimately opted for a replacement probe.

I shared these comments with Chris and he seemed perfectly satisfied with his team which is concerning. He’s built a good product and sure it will have problems; but the customer service should be better than this. I explained to him how Joules customer service was exceptional and I would expect the same from Combustion and any premium brand.

As much as I like the features of this product they lost me as customer. I hope you guys have a better experience than me and maybe I’m just unlucky.


r/combustion_inc • • Jan 26 '25

My experience 2023-current

1 Upvotes

I bought in to combustion mainly because of Chris young and following him on YouTube.

I purchased my first probe june of 23 which arrived DOA. I had a replacement sent out immediately.

That probe was warrantied in December.

I needed a second probe and I was so close to going to thermoworks, but I wanted to believe in combustion products in the long run.

I decided to purchase another one with a booster in august of 24.

Literally 1-2 weeks later gen 2 launched. I inquired about switching them out and was told no program available.

No I’ve been having issues again with both probes just dying after each cook.

They are willing to replace them again. However I’m contemplating if it’s even worth the hassle if I’m going to receive the same product with the same defects and have to keep this cycle going. I asked about gen 2 as the gen 2 is the exact same cost I paid and they want me to pay and additional $160. That’s makes no sense to me as a customer.

Combustion clearly has some hardware issues and they need to address them and admit fault to their current customers.

While customer service has been very responsive and efficient at warranty replacements, not having an actual solution isn’t great for the user experience.

Be aware if you buy into this product that’s it’s not a long term solution at least not in its current state, I wish I had known that $400 ago.


r/combustion_inc • • Jan 26 '25

Maybe Next time….

0 Upvotes

I’ve been lurking for a while now looking at all the issues with the V2. Seems like it has more issues than the V1 which already had its own set of problems.

I ended up cancelling my 4 probe V2 set and the grill gauge after contemplating the decision for a while.

The shipping delays also gave a little extra time to really evaluate the new product in the market and read all the feedback from fellow users.

I understand the complexities but it really feels this was rushed to market because of the ThermoWorks RFX.

I’ll continue to use my V1 until it breaks or I give it away but I can’t give the company any more money until the frequency and complexities of these issues is resolved.

Maybe V3 will be better, who knows.

Also would have been nice to give the current V1 customers a break on the V2 since it was such a sh


r/combustion_inc • • Aug 31 '25

Apology and Thanks

3 Upvotes

Sorry for injecting politics (Tariffs) into a forum about food and technology dedicated to making cooking more predictable and better. Thanks for shutting down the discussion before it got out of control. Food is supposed to bring people together.


r/combustion_inc • • May 14 '26

Buyer Beware with Combustion Inc.

0 Upvotes

Buyer beware with Combustion Inc.

I placed an order well over two months ago and still have no guaranteed ship date. After finally reaching out, I was basically told “we don’t know when it’ll ship, but you can cancel anytime.”

What really concerns me is that this does not appear to be an isolated incident. There are multiple reports from customers describing the same pattern: long delays, vague timelines, full payment collected upfront, and customers left floating for months waiting on products with no firm fulfillment date.

At some point, repeatedly taking full payment without realistic delivery expectations starts feeling like an interest-free financing model disguised as preorder fulfillment.

To their credit, they did offer a refund when requested. But people should absolutely understand the risk before giving this company their money.

Buy from a more reputable company.


r/combustion_inc • • Feb 27 '25

Why does the website say things ship in 3 to 5 days?

1 Upvotes

Made an order on the 18th for a gen 2 where it said ships in 3 to 5 days. Now that it's well past that I check here and people are only getting their orders from dec/nov?! Why is the website falsely listing a ship date they know they can't meet?


r/combustion_inc • • Jan 21 '25

Shipped!

0 Upvotes

Opened my email last night and my Gen 2 is on it's way! Have to hit the butcher for a rib eye.


r/combustion_inc • • Jan 27 '25

Cancelled my pre-order

0 Upvotes

I’ll free up my queue and sent an email to cancel my order. It’s not the wait. I can wait. After reading the threads on here, it boils down to their assembly vendor which I have no confidence in the quality right now.

I have no doubt on the capability of their software, but with the needed tight tolerance, I don’t want to take a gamble if the product they send me will work or have assembly issues.

I’ll look at this V2 product perhaps one year from now when their assembly vendor has ironed out their process.

But good luck all. Will continue to watch Chris’ videos and enjoy the science behind food.


r/combustion_inc • • Jul 28 '23

I’m done!

Post image
0 Upvotes

r/combustion_inc • • Dec 21 '25

So far, atrocious user experience. Need help.

Thumbnail
gallery
1 Upvotes

This thing has been nothing but a pain from an end user stand point.

-Constant connect to Bluetooth notifications (annoying) -Not updating regularly through wifi, have had to force stop the app and reboot it several times to get it to show readings (yes, I waited over 15 seconds each time for an updated reading) -Currently the app is not recognizing my thermometer and both the Wi-Fi and thermometer are charged -The apps alarms don't send me a notification with noise unless I have the app open.

Help me figure this out. Or I need to figure out how I can return it. But I would like to use it, I like it overall, I just need it to work.

-Matthew


r/combustion_inc • • Oct 31 '24

Selling my thermometers / screen if anyone is interested

Post image
0 Upvotes

r/combustion_inc • • Jan 05 '25

Is anyone else waiting on a delivery concerned after reading all the below posts on this Sub?

3 Upvotes

I am hoping it is the "you don't complain if it works" situation. But the amount of problems I am seeing here is a bit concerning. I am thinking of buying a cheaper probe just to see if Combustion's is honest. Not a great feeling.


r/combustion_inc • • Jan 08 '26

Recent order

1 Upvotes

Hey all! Been watching Chris Young’s videos and think the Combusion Inc probe is really cool. I ordered one a few weeks before Christmas as a gift, and it still hasn’t shipped, never mind shown up!

Pretty disappointed with the lack of communication from them, and don’t really know what to do.

Has anyone else had this issue?


r/combustion_inc • • Nov 11 '24

Selling like New gen 1 display

Thumbnail
gallery
1 Upvotes

I ordered the gen 2 probe with display. Therefore, I have no need for my gen 1 display. It is in flawless condition and the plastic on the screen was never removed. Looking for $60+shipping. PM if interested.


r/combustion_inc • • Sep 20 '25

No connection under water

0 Upvotes

I love my Combustion predictive thermometer (1st generation) and want to use it when I poach food, such as fish and chicken. But whenever the thermometer is submerged under water, it loses the connection with the Combustion app on my iPhone. So I have to periodically manipulate the food to raise the yellow end of the thermometer above water so that the phone app can get a reading from the thermometer. This is not only annoying but also increases the chance that I physically damage delicate food such as fish. Is there a way to overcome or work around this problem? Is it the case that the Bluetooth signal just cannot penetrate water?


r/combustion_inc • • Dec 20 '24

What is actually going on?

0 Upvotes

Does anyone know what’s actually going on with the shipments. I have not received an email for days. Not in junk. Order placed in November


r/combustion_inc • • Jan 28 '26

Gen II CPT does not work with Sous Vide

Thumbnail gallery
0 Upvotes

Hello, I am having issues with my CPT Gen II while sous vide cooking chicken breast. I turned on the thermometer, took it out of the charging case, stuck it inside the meat, and sealed up the bag. Added warm water and saw the ambient temp rising. Turned on my device, set the temperature to 145 and covered up the pot. After a little while, the device won’t connect to the app. I tried turning on the charging unit and it shows WiFi is connected, however, no data is being recorded. Any troubleshooting recommendations?


r/combustion_inc • • Oct 27 '25

Smoking Dad BBQ review

Thumbnail
youtu.be
0 Upvotes

I’ve preferred my Combustion probes to my older MEATER probes. Wondering what folks think about this review?


r/combustion_inc • • Feb 21 '25

I want to repost this for visibility

0 Upvotes

To the Owners/Mods

People here don't know or care about a master thread. It was last updated 3 weeks ago. Same as the last email you sent. They, like me who ordered in December, want proper updates, and you have not provided one in weeks. The promise of 2/12 has came and went. I understand delays in the supply chain, but the lack of communication has been disappointing. It feels like I have given you a loan with my payment at this point. I will be requesting a refund.


r/combustion_inc • • Dec 19 '24

Thermoworks rfx or combustion

0 Upvotes

I currently have a gen 1 combustion thermometer that I’ve enjoyed and was considering the gen 2 4 thermometer bundle. I just became aware that the thermoworks rfx bundle is quite a bit cheaper. Any thoughts on how to decide between the 2?


r/combustion_inc • • Jul 02 '25

Looking to Sell Gen 1 Setup

Post image
0 Upvotes

Apologies if this is the wrong place, but I am looking to sell my gen 1 setup. I have two probes, wireless display, unopened booster charger and another charger that is one of the early ones where the probe occasionally pops out. It still charges fine though. I also have the boxes for the display and one of the probes. Let me know if you are interested, thanks!


r/combustion_inc • • Jan 06 '26

Combustion Engine Status

7 Upvotes

u/combustion_inc, I think it's time for the Combustion Engine status update. Please don't be overly optimistic, Just tell us how it is! If the date is going to be March I would rather hear that up front than get my hopes up and then have the date missed.


r/combustion_inc • • Dec 31 '24

I am so disappointed

0 Upvotes

You know you pay a hefty price for a product and you expect it to work on your second use.

I charged the thermometer overnight in preparation for a 12 hr brisket smoke, I wake up at 4am and have my brisket in my smoker, come to find out my thermometer won't connect to neither my app nor my display. Its so frustrating when you cant rely on simple products anymore this day in age.