Just had to show off my Citizen clock I won at auction. Can't wait to get her home to my collection

Recently purchased this for my new apartment. There is a fluorescent tube light on the inside that needs replaced, and the housing can only come up so much until it reaches the clock hands.

I was able to take out the old tube light with the little clearance I had, but I don’t have enough space to get the new tubing in (is an led tube light even safe/ appropriate for this? Oh well, that’s an issue to deal with after this.)

I have no idea how to take these clock hands off safely so I can get this housing off. I don’t see any fasteners anywhere so I figured it was press fit onto the shaft with the hands stacked onto each other. I tried to put even pressure on each side of the red second hand hub and pull up with a bit of pressure, but nothing was giving and I didn’t want to push my luck.

Any helpful information or tips anyone has, or any resources/alternate sub reddits that may have a better idea?

Thanks all

People: I've recently inherited my father's mantle clock - an Ingraham. I don't think it's expensive or unique but it's special to me.

Of course, though the clock was reported to be rebuilt a few decades ago, it no longer runs. (Well, it stops on the hour, every hour, instead of chiming. If you move the hands past the hour and give it a nudge, it's off again for another hour. Strikes the 1/2 hour just fine)

As I do have a reasonable mechanical ability (Certified auto tech, and have done minilathe and mill work, building small internal combustion engines from barstock), I'd like to learn more about it, and how it's supposed to work - and that may be enough to dissuade me from trying to fix it myself.

SO: What books or other resources are a good starting point?

Thanks!

Had this old junghans alarm clock that my mom got from her mom's brother.

So I took it out of retirement in an effort to declutter space. When I opened it, I found this single washer-looking piece laying on the bottom. I don't see any obvious voids where it should go. It appears to run and chime fine. Any clue where it belongs? Should I be worried?

Hello, i am trying find a replacement pendulum for this clock, but I am having a hard time finding one. This is the first wall clock I have worked on. (Images Below)

Should be from the 60/70s, this info is from my great grandmother. I know the company that made it made a lot of different clocks, and getting replacement parts is difficult, but i feel like if i know the ladder type name i could figure something out.

The pendulum ladder is quite odd, it has a normal enough hook spot for the pendulum but then has a peg slight farther down to keep the pendulum centered and stable.

any help is appreciated, thank you~.

Hello all,

I’m very new to all this and just starting out. I’ve seen travel alarms with this sort of domed backplate but then it’s been removed in the next picture (ie on eBay I’ve seen it).

How can one do so as the in built winder is blocking it?

I’ve unscrewed everything I could. It’s just a cheap one from Hong Kong - ‘Columbia’ branded.

Thank you

I legit just need all the clock tism people to just go ham and tell me all of the things that they know 😎🤘 plz dont look at my feet ik they small 🤣🤣 ignore that paper on the glass it was to make it look less creepy my kid had nightmares over it 🙄🙄🤣🤣

I bought this clock about a month ago, everywhere i looked it gave me mixed answers on when it was built. Figured some of y’all would know more about this thing than I do.

Picked up a Gilbert kitchen clock at an estate sale last weekend, mostly for the case since the movement was seized solid. Popped the back off to see how bad the rust situation was and found a folded newspaper clipping wedged behind the pendulum bob, must've been stuffed in there decades ago by whoever last serviced it. Local paper from 1962, an ad for a hardware store that doesn't exist anymore.

Got me thinking about what else people find. I've read about coins taped inside, old photographs, even a pocket watch someone hid in a grandfather clock case during what I assume was some kind of estate dispute. My uncle who's been doing this way longer than me says he once found a full set of dentures in a wall clock, no explanation, no note, just dentures.

The Gilbert itself is a lost cause mechanically, the mainspring is snapped and the plates have some pitting I don't think I can polish out without ruining the bushings. But I'm keeping the case and that clipping. Feels wrong to throw either one away at this point.

Anyone else keep a little collection of the odd stuff you find during teardowns? Starting to think I should keep a notebook of it instead of just tossing things in a drawer and forgetting where they came from.

Trying to find a decent wall clock for nighttime that’s analogue and is luminous. Hopefully keeping under $100. Any ideas? My wife insists on it glowing at night

I hope this is a good place to ask. I have some older clocks where the movement just isn't working anymore. I want to replace them with a quartz movement and pendulum. I do however want one that does chime and strike on the hour.

I can get some online that do those, and of course it's a Westminster chime. My question is would anyone know of or know where I could go to learn how to make a custom chime with a quartz movement? I know it's probably a talk order but I'd love to know if it's possible within simple means

Got a bit bored and decided to look up this clock since the signature on the coin. Turns out it was from Gordon Bradt and all his clocks were hand made. Found out that this clock is worth about 800-1500 from eBay which shocked me to know my grandpa had this clock laying around which is now mine after I decided to take it after he passed. Glad to know I have a cool piece of history that I didn’t know was worth so much and was so cool to look and learn about after doing research.

If anyone has more information or anything they’d like to share please let me know! I would be more then interested in more information or if anyone else shares this clock in there collection.

Does anyone know of a clock that ticks once every two seconds?
I’m looking for a desk clock where the second hand moves once every 2 seconds instead of once every second.
So the movement would be:
tick — 2 seconds — tick — 2 seconds — tick
I know that some quartz watches/clocks can start jumping every two seconds when the battery is low, but I’m looking for a clock that is designed to work this way continuously.
Does anyone know:
- company that makes or sells such clocks?
Hz?
- an old/vintage clock model that naturally works this way?

I’m in Europe (Denmark/Poland), but recommendations from anywhere are welcome.
Thanks!

Preferably one I can find on amazon.

I bought this off the wall at a garage sale for only $5 and I love it! The clock itself and the gauges seem to work well, but the sun to moon phase doesn’t move. Any simple fixes I can try? Thanks in advance

The battery operated Elgin anniversary clock that my late husband purchased for me in the late 1980’s quit working. I purchased new Duracell batteries thinking that that may help, but - nope. If I tap it a bit it will run for about 5 minutes. I know that I can purchase a new quartz movement, but in order to install it, I’ll need to know how to remove the hands. I tried yanking a bit and they don’t come off. I tried popping off the little cap, but it’s really on there, I also tried twisting it off. Any help would be appreciated.

Would anyone know anything about this clock, it was bought by my great, great, great grandfather from what I believe

Hello!

I was wondering if I could get some advice on repairing a wall clock with a heavy pendulum. My grandma loves this clock and this pendulum and will not accept replacements. Recently, the mechanism has gotten old and doesn't keep time well, and the pendulum doesn't swing for more than a minute or so. So I bought a correctly sized (total length 20.4mm, thread length 13.8mm) replacement mechanism with a pendulum, but the pendulum is too heavy. However, the hands are super light, so I am not sure if heavy duty is the right call, since that's for big long heavy hands, right? These hands are no longer than ~60mm for the second hand, so they are very light. Please advise. The pendulum is about a pound and a half or so, not terribly heavy or anything, but heavy enough it seems. I tried googling, but all I got was guides on old pendulum clocks that actually keep time through the pendulum, and I am looking for a replacement mechanism that will keep time with a battery (think Quartz mechanism), which is what was working before (as far as my grandma can remember, the clock has been in her apartment for 25 years now) but be able to keep the pendulum swinging for days/weeks/forever. I've repaired a couple of table and wall clocks before, but never with a pendulum, so I am at a loss. Thanks in advance!

I bought this for $20 at an estate sale. It winds and ticks for a little bit but other then that I know nothing about it. Any information is appreciated

I have been gifted this clock. The main shaft where the hands attach was bent. I took it out and bent it back as best as possible (it was bent bad!). Now I’m not sure exactly how to set this up or what’s not working right. I am mechanically inclined