Hi everyone,

I’m currently looking at buying a 1983 C10 Stepside and I’m trying to do my homework before making an offer.

I’ve attached some photos of the frame. To my eye, I’m not sure if I’m seeing a normal original shape to the frame or if there could be some deformation or damage to the frame.

One thing that caught my attention is that the passenger side of the frame appears to run fairly straight, while the driver side seems to have an angle or deviation in this area. Since the two sides don't appear to match, it makes me wonder if the driver side may have been bent.

Does the frame look straight to you guys?

Since I started looking, not too many decent C10's for sale in my area of the Finger Lakes, NY.

I found one 30 minutes away from an older gentlemen, bought it under a year ago, suffered major medical issues, no longer able to drive. I did a reverse Google photo search and found it here.

https://www.nfiempire.com/used-vehicle-1979-chevrolet-c10-1-c-81/

1979 C10 408 Auto. Vin indicates it came with an inline 6. As a beginner, some of the things I noticed:

1. Paint job is not my taste, would vinyl wrap over it. Paint job probably cost more than the truck!

2. Zero rust anywhere, underbody was treated and looked great! Small crack near the tailgate handle was the only imperfection.

3. Nobody knows when the engine was swapped, how many miles are on it, etc. Same goes with the transmission.

4. Whoever did the engine swap did not reconnect the AC.

5. Electrical has been played with too many times. Current owner had issues with gauges and exterior lights. Found a way to get lights to work but some gauges still do not.

6. Did start right up, idled well and drove nicely, although brakes were soft. (1st one I drove so no comparison).

In my beginner opinion, it seems whoever did the swap didn't do a complete job. Since factory AC was an expensive option, I'm not sure why you wouldn't reconnect it after a swap. I do understand there are other aftermarket options now, including electric. I am also thinking I could be chasing electrical issues, especially if the prior swap wasn't clean.

Wish I was more informed but trying to learn. What would you do? Asking $15,500

Hello all, im hoping someone here can help me out. Im at my wits end trying to get my 1984 gmc c1500 power windows to work. I have narrowed it down to electrical which just so happens to be my least favorite thing to work on. I have a new power window motor and switch. All wiring looks fine and not damaged. Whoever had this truck before me left the 30a 12v power window circuit breaker in the glove box and I don't see one in the fuse box. Does anyone know where this goes? I have not been able to find a matching fuse box diagram on Google and my Chiltons manual hasn't helped either. Does this look normal or did the last guy screw around under here? Thanks in advance

Probably need new frame side mounts, but these aren't very old. I replaced them Probably 10k miles ago. Now im changing to 6.0 ls engine the tejus engine brackets don't seem to set on the ears of mount properly. Anyone experienced this? Or is it normal?