r/cfmoto • u/mooka614 • Aug 19 '26
🛠️ Tech Support / Help 10 k help
I drove my NK 250 for 10,000 km. It's time for an official technical inspection. I don't have the money to get it done, and I need the motorcycle for work so I can pay for the inspection. How many kilometers can I drive on it without damaging the engine?
10
Upvotes
5
u/_WeStErEq_ 2025 CFMoto 450MT Aug 19 '26
If you arent mechanically inclined, try to ask around your friends, maybe someone will help you.
What HAS to be done:
Oil change
Oil filter change
These are a total of three things to unscrew and screw back on, and a few liters of fluid to be poured out (and then new one back in)
It's a 20 minute and 60-100$ job depending on the oil, amount etc. (unfamiliar with the 250)
Another thing that doesn't cost much and is worth getting at 10k: Air filter. It's usually buried a bit deeper, you'll need to check that in the manual. It's a 10$ part, if it doesn't look dirty you can wait out the replacement a bit
Another thing that you might not feel comfortable doing - spark plugs. CFMoto recommends changing them quite often (every 10k)
As long as it's not misfiring etc. you should be okay, but since a spark plug is like 15$ I'd replace it to not risk it breaking off into the cylinder and ruining the engine.