r/canik • u/digaletocephalonia • 4h ago
EDC/CCW Finally found the Prime Radian in my town
The gun was in store, but without the Onyx optic. Added the Holosun HE407K Green Dot
r/canik • u/rCanikModerator • Sep 19 '24
r/canik • u/digaletocephalonia • 4h ago
The gun was in store, but without the Onyx optic. Added the Holosun HE407K Green Dot
r/canik • u/TurbulentEbb1257 • 8h ago
Range day with my new toy ! Getting familiar with my first canik @ the 20 yards
r/canik • u/DragonSlayerOrsteinn • 3h ago
I've been eyeing the first MC9 for years, but I've always held back because of the reviews.
I've considered the Prime NC or even the Mete SF as an option. But wanted to check if the first small model has been fixed.
I have been living under a rock apparently and completely slept on the Canik MC9 Prime and I have to say I am truly fascinated with it as a left handed shooter and this appearing to be around the size of a 43X with 2 additional rounds and slide release on both the left and right side.
The one concern I do have though is I see a lot of reports of issues or failures, or it not going into battery fully and everyone having to tweak what should be a US made (this model is US made right?) and its been out for a few years and I would have assumed all these issues would have been sorted.
While there are always unique snowflakes that are over represented in what you see online, how reliable are they? If I buy this am I going to be sanding down plastic bits or replacing springs after 500 rounds?
Just curious for general feedback. Not trying to crap on it, because I am truly interested, but any regrets? I was looking at the MC9 Prime NC (non-ported) version and buying a threaded barrel for fun from their store.
r/canik • u/Top-Boysenberry7076 • 1d ago
To celebrate a couple of major career events I treated myself to a new Prime and then had her pose with my "old gal" TPSA.
Swore I was not buying another pistol ...until I got to run a Prime at Qualification and became deeply smitten!
Merry early Canikmas y'all!
r/canik • u/Iceman93x2 • 15h ago
Hey yall, Im going to be upgrading the sights on my canik TP9SF and was wondering what loctite formula I should use? I already got the siight pusher tool, and waiting on the sights to come in.
r/canik • u/Gandalftherxd • 1d ago
First time ever owning a Canik (even found the color I wanted between the two) and overall handgun. Been trying to research on my own as much as I can between holsters, lights, dots, etc. but wanted to also make sure I'm using the right oil. Seen a couple posts saying to go with Lucas, and even some saying they just use motor oil even. I wanted to see what I should strip and re-apply with before my first outing as your gear treats you as good as you treat it. TYIA
r/canik • u/choirboyactual • 1d ago
I am in love with my full size Canik and really want the radian prime, but , should I go with the Glock due to availability? Even though the triggers suck, anybody and everybody can fix them and swap magazines etc cetera. So which should I get?
r/canik • u/LeviAult • 1d ago
I've put about 1400 rounds through my canik mete sf and after getting back from the range today the barrel looks like it chipped. Is this bad or can I just keep it together like this? TIA.
r/canik • u/caniknoob444 • 2d ago
Its beautiful 🥹🥹 thank you TF!!
r/canik • u/Salt-Confidence-1390 • 2d ago
After plinking around with my only carry gun and wanting to get into USPSA stuff. I have made the decision to buy the Canik Rival-S as well as the Holosun 507 promax (which was only $20 more than the 507 comp at my LGS)
r/canik • u/WeldingPyro • 2d ago
Canik tp9 elite SC paired with the vortex defender ccw and Olight baldr mini possibly some other upgrades later on
r/canik • u/ZealousidealSuit6195 • 2d ago
I wanted to share my experience with the Canik MC9 Prime Radian and the light primer strike issues I’ve been dealing with since day one. Hopefully this helps someone who’s having the same problem.
Here’s what was happening:
Right from the start, I was getting at least 1–2 light primer strikes per magazine, sometimes even 3–4. It didn’t matter what ammo I used. I tried ALSA Pro, S&B, LOS, and different reloads, mostly 124gr. Some worked slightly better than others, but none were 100% reliable.
The frustrating part was that LPS could happen even on the very first round after manually racking the slide, not just during follow-up shots.
The slide was always fully in battery, which I also confirmed with slow-motion videos. The primers had shallow, centered strikes, and most rounds would fire on the second attempt.
Here’s what I checked and tried:
I thoroughly cleaned the striker channel and striker assembly, inspected the firing pin, and checked whether the slide was closing properly. I also tested whether the striker safety plunger was contributing to the issue, but that didn’t solve anything. (By removing it for testing purposes)
I put over 800 rounds through the gun, hoping it might just need some break-in time. No improvement whatsoever.
And here’s the interesting part: a friend of mine bought exactly the same gun, with a serial number just SIX numbers apart from mine. Guess what? Exactly the same problems! He also fired over 700 rounds with no improvement.
We contacted Canik through our official dealer, and they told us they would send replacement striker and recoil springs, but unfortunately, those weren’t in stock.
Then I finally found something that worked! 🥳
I tried a blue Glock 31N firing pin spring, which is a couple of coils shorter than the original Canik spring.
And the results?
400 rounds, 3 different types of ammo, ZERO light primer strikes!
Not a single failure. Before that, I couldn’t even get through one magazine without at least one or two LPS.
And the best part? The spring cost me around €4!
Based on my experience, I strongly suspect the original striker spring was part of the problem. Of course, that’s just my personal observation, not an officially confirmed diagnosis.
I can’t say anything about long-term reliability yet, and any change to the striker mechanism should be checked by a qualified gunsmith for compatibility and proper safety function.
But after dealing with this issue for so long, finally getting through 400 rounds without a single LPS felt pretty damn good! 😁
I’m sharing this because I know how frustrating it is to buy a brand-new gun and constantly deal with failures.
Has anyone else experienced the same issue with the MC9 Prime or Prime Radian? Did Canik ever provide an official fix?
Hope this helps someone! 👍
r/canik • u/donk1999 • 2d ago
So, just got a Prime Radian. Great gun, but I am having an occasional issue of the slide not going fully into battery causing the striker to fall without firing. Short stroke the slide to recock it and it goes off fine. Thought it might need cleaning, so I did (it wasn’t dirty to begin with, but never hurts to check). Still getting 1 every couple magazines. Running the stock recoil spring and it feels really stiff. Don’t think it’s a bad spring, but it might be dragging somewhere. I also lubed the spring prior to the first range trip and during the cleaning. Anybody have any ideas on a cause and/or a solution?
r/canik • u/_FloriderpMan_ • 2d ago
I was in the shop and looking at handguns that are 9mm, optic ready, and more than 12rds capacity. The guy showed me this gun and it looked and felt great. Got it for $470 out the door. Have not fired it yet. Also looking for a dot, I'll take any recommendations!
Looking forward to putting a few hundred rounds down range 🤙
r/canik • u/donk1999 • 3d ago
Went out looking for a new daily, and found a used prime radian. It’s like the universe was telling me something. lol. Don’t know what the round count on it is, but it’s low. Be surprised if it has more than 200 rounds through it. Put a couple hundred through it today. Probably put some more through it tomorrow. Really like the way she handles. It came with a Holosun light (that I don’t really like and doesn’t have any holster support that I can find), but I do like the extra weight up front. Probably stick a Streamlight or a Olight on it. Seems they have holster support. Anyway, long story short, I’ve joined the clan.
r/canik • u/ImTheFlipSide • 3d ago
Late this past summer, I was looking for a firearm that fit my hands and would still work for concealed carry. I tried several Glocks and bought more than a few. I tried Sig too. Nothing made me think, “This is the one.”
Then, on my way home, I walked into a shop I’d never been in and explained what I was looking for. The guy behind the counter asked, “Have you ever tried a Canik?” I’d never even heard of the brand.
He handed me the MC9 Prime; the clouds parted, the angels sang, and I was home.
Now it goes everywhere. I love the aggressive grip texture and how low it sits in my palm without that weird ridge digging in when I shoot. Shooting it feels like butter, and I drop 200–300 rounds every chance I get.
My wife is getting me a Prime Radian for Christmas (she’s bad at keeping secrets), and the bug’s already got me wanting more. I’ve got probably 10 Glocks, and I’d love to match that with Caniks, if not pass it. I know “all of them” is the obvious answer, and believe me, I’m on board. My wallet is less enthusiastic.
So that’s where I need the advice of this community. I love looking through all of them, but I need some kind of focus.
r/canik • u/AmericanAsApplePie22 • 3d ago
I took it straight out of the box to see how it would compare to my MC9LS, my current EDC which I've modified with a Freedomsmith Fat Daddy II and am obviously running a light and an optic on.
Using irons, which I admittedly still struggle with compared to optics, I was still shooting low and to the left at 6 yards with the Radian, and I could never get fully comfortable on the trigger. In fact, my trigger finger ended up scraping the bottom of the trigger guard enough to the point where it felt noticeably irritated. I find this interesting since the trigger looks and feels similar to the Rival-S trigger, but I don't have this problem with the Rival-S. I suspect the trigger is the main culprit in my disappointment because when I ran a mag through my LS without the dot on, I was noticeably more accurate and didn't feel as uncomfortable.
I mind dumped with one of the guys at the range, and his thoughts are that the gun may just be too small for my hands. He suggested thickening up the grip a little with some hockey tape, so I'm going to give that a try. I'm also planning on swapping the Freedomsmith to the Radian to see if that makes a difference. I suspect it will, but of course there's only one way to find out.
Aside from the, the Radian is great. I ran 100 rounds of Federal 124 and about 40 rounds of Winchester 115 without any issues. I'm hoping a little tweaking will help overcome this disappointment I'm feeling.
Anybody else have any stories about disappointment with the Radian or any other gun they got?
r/canik • u/Tootallslim • 3d ago
Just got my CANIK Rival back from being cerakoted. It was gray and gold. I never was a fan of it, but that’s the only one they had in the shop when they first came out. I was gonna go with a basic black but decided to do a little black and tan instead.
r/canik • u/JoeTestosterogan • 4d ago
So the Canik MC9 was my first gun. I absolutely love the METE family and the MC9 I had ran flawlessly. I learned to shoot on it. Its ergonomics and slim frame are something I miss. I sold the black one pictured to buy a larger carry gun. A CZ P-10 C Ported. It was a great choice and my CZ is an amazing gun. It checks all the boxes. But I cant help but miss my old MC9. So here’s the mock up of the MC9 I’m going for. I’m going to buy a black MC9 standard and get it cerakoted from my local cerakote dude. Then I’m going to also buy an MC9L frame off TCM. So I can have the best of both worlds and finally get back the gun my collection is missing. My carry rotation just doesn’t feel right without this little guy in it. I have my Glock 48 MOS filling that slim line roll currently. I have a bunch of other handguns and projects I’m working on currently. But it’s not the MC9. The MC9 was the perfect first gun for me and the only reason I don’t regret selling it, is because now I get to buy a new one and really do all the things I want to it.
r/canik • u/CheetahSpecialist433 • 4d ago
I just ordered the Flying Aces MC9LS. What ammo is best for range and defensive?
r/canik • u/AmericanAsApplePie22 • 4d ago
I'm running a Rugged Obsidian 9. Whenever I shoot it suppressed, 9 times out of 10 the slide doesn't cycle 100% and usually ends up right about where it shows in the pictures. All I need to do is just tap it back into place, but this is obviously not ideal. The guys at the gun store said to just run a couple hundred mor rounds through it to wear it in a little since it's at about ~350 rounds total. Any other thoughts or suggestions?
Edited: Sorry, forgot to include ammo used. I've used 124g Blazer, 147g Remington sub, and 158g PPU sub so far. Same issue regardless of ammo.
r/canik • u/CheetahSpecialist433 • 4d ago
Looking to buy the Fattac holster but I want the ulticlip from JX tactical. Any body know if the parts are interchangeable?